TRENDnet TEW-610APB Mode d’emploi

F.A.Q’ s for TEW-610APB

Q: How do I configure the Access Point through the web-based configuration?

A: Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter your

username (admin) and password (admin).

Q: What is the default IP address of my Access Point?

A: The default IP address of the TEW-610APB is 192.168.0.100.

Q: How do I change the IP address of my TEW-610APB?

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter your

username (admin) and password (admin).

2) Click Admin on the left hand side.

01/16/06

3) Change the IP address to the desired IP address and click Save.

Q: What is the default username and password for the TEW-610APB?

A: The default username and password are both “admin”.

Q: How do I change the password and username on my TEW-610APB?

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter your

username (admin) and password (admin).

2) Click Admin on the left hand side.

3) Enter the new Username and/or Administrator Password. Click Save.

Q: What can I do if I forgot my password or want to reset back to factory defaults.

01/16/06

Locate the reset button on the back of the unit. Press and hold it in for approximately 15

seconds.

Q: How do I upgrade the firmware on my Access Point?

DO NOT upgrade firmware on any TRENDnet product using a wireless connection.

Firmware upgrades over wireless connections may damage the product. Please perform firmware upgrades

with "wired" network connections only.

Click here to download the firmware. Save it to your desktop and extract it.

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter your

username (admin) and password (admin).

2) Click Admin on the left hand side.

3) Click Browse next to the box under the Firmware Upgrade section. Locate and

select the firmware file that you previously downloaded and extracted.

01/16/06

4) Click Upgrade. It will take approximately 30 seconds to upgrade the firmware and

the access point to restart.

Do NOT interrupt the firmware update process. Doing so may damage the product.

Q: How do I enable encryption on my Access Point?

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter

your username (admin) and password (admin).

2) Click Security on the left hand side.

3) Choose your Authentication type and enter your key settings. Click Save.

Q: Where can I find the MAC address of my Access Point?

01/16/06

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter

your username (admin) and password (admin).

2) Click on the Status tab at the top of the page. It is located directly across

from LAN MAC:

Q: How do I configure my TEW-610APB in WDS mode?

The TEW-610APB uses WDS (Wireless Distribution System). The channel and SSID on

the remote Access Points must be the same as the TEW-610APB. The remote Access

Point must also support WDS.

Note: WPA encryption is not supported on WDS links.

01/16/06

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter

your username (admin) and password (admin).

2) Click WDS on the left hand side.

3) Single click the Enable WDS check box to enable WDS.

4) Enter the remote Access Point’s MAC address into the AP MAC Address field

and click Save.

Q: How do I change the channel of my Access Point?

01/16/06

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter

your username (admin) and password (admin).

2) Click Wireless on the left hand side.

3) Choose a different channel from the drop down box next to the Channel field and

click Save.

Q: How do I change the SSID of my Access Point?

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter

your username (admin) and password (admin).

2) Click Wireless on the left hand side.

01/16/06

3) Enter in your desired SSID in the Wireless Network Name (SSID) field. Click

Save.

Q: How do I enable Super G mode on my access point?

1) Open your web browser and type the IP address of the TEW-610APB in the

address bar. The default IP address is 192.168.0.100. At the login, enter

your username (admin) and password (admin).

2) Click Wireless on the left hand side.

01/16/06

3) Choose the Super G mode that you want to use next to the Super G field. Click

Save.

Note: Super G mode requires that you use channel 6. Super G mode with Static

Turbo requires that that the 802.11 mode is set to 802.11g only and that Adaptive

Radio Selection is disabled. The Adaptive Radio Selection is used with Super G

with Dynamic Turbo (AR enabled) mode.

01/16/06

Autres manuels pour TEW-610APB

Autres manuels TRENDnet Point d'accès sans fil

TRENDnet

TRENDnet TEW-413APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-410APB Manuel utilisateur

TRENDnet

TRENDnet TPL-410AP Manuel utilisateur

TRENDnet

TRENDnet TEW-310APB Manuel utilisateur

TRENDnet

TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... Manuel utilisateur

TRENDnet

TRENDnet TEW-815DAP Manuel utilisateur

TRENDnet

TRENDnet TPL-310AP Manuel utilisateur

TRENDnet

TRENDnet TEW-AP100plus Manuel utilisateur

TRENDnet

TRENDnet TEW-840APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-412APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-230APB Manuel utilisateur

TRENDnet

TRENDnet TEW-670APB Manuel utilisateur

TRENDnet

TRENDnet TEW-825DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-814DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-821DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-841APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-753DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-WLC100 Manuel utilisateur

TRENDnet

TRENDnet TEW-814DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-510APB Manuel utilisateur

TRENDnet

TRENDnet TEW-670AP Manuel utilisateur

TRENDnet

TRENDnet TEW-230APB Manuel utilisateur

TRENDnet

TRENDnet TEW-450APB - Wireless Super G Access Point Manuel utilisateur

TRENDnet

TRENDnet TEW-735AP Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur