TRENDnet TEG-S811Fi Manuel utilisateur

H/W: v1.0R

TEG-S811Fi

Quick Installation Guide

Table of Contents

English ......................................................................................................

Troubleshooting ........................................................................................

1. Before You Start

2. Hardware Installation ........................................................................

3. Configure the Switch .........................................................................

................................................................................

Table of Contents

Version 01.21.2008

System Requirements

Application

Package Contents

1. Before You Start

English

?User Guide CD-ROM

?Quick Installation Guide

?2 Mounting Brackets with Screws

?RS-232 cable

?AC Power Cord

TEG-S811Fi

?Computer with Serial port

?50/125 or 62.5/125 µm Multimode Fiber cable with SC-type connectors

for 100BaseFX ports

?Mini-GBIC module (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40,

TEG-MGBS80, TEG-MGBS10D3_D5, TEG-MGBS40D3_D5) for Mini-

GBIC slots (optional)

Web Browser: Internet Explorer (6.0 or above)

1000MbpsFiber 10/100Mbps

8-Port 10/100Mbps Layer 2 Managed Switch

with Gigabit Port and Mini-GBIC Slot

(TEG-S811Fi)

24-port Gigabit Web Smart Switch

with Mini-GBIC slots

(TEG-240WS)

Multi-Mode Fiber

Mini-GBIC Modules

(TEG-MGBSX)

RS-232

Laptop with PC Card

(TE100-PCBUSR)

Workstation with PCI Adapter

(TE100-PCIWA)

Workstation

8-Port 100Base-FX Layer 2

Managed Switch with Mini GBIC Slot

(TEG-S081FMi)

2. Hardware Installation

English

Note: After hardware installation is complete, use your browser to configure the

TEG-S811Fi. See Section 3 Configure your Switch for more information.

1. Connect the Power Cord to the

rear of the TEG-S811Fi and then

to a power outlet.

English

4. Slide a TRENDnet mini-

GBIC module into the mini-

GBIC slot (optional).

2. Connect a RJ-45 Ethernet cable

from one of the 8-ports on the

switch to an Ethernet connection

on your network.

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

4. Slide a TRENDnet mini-

GBIC module into the mini-

GBIC slot (optional).

2. Connect a RJ-45 Ethernet cable

from one of the 8-ports on the

switch to an Ethernet connection

on your network.

3. Connect a RJ-45 Cat 5e

Ethernet cable to an

10/100/1000BaseT connection

on your network (optional)

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

English

Note: Before the Switch can be configured, a Static IP address must be

assigned on your computer's network adapter in the subnet of 192.168.16.x.

Since the Switch's default IP address is 192.168.16.1, make sure no other

network devices are assigned an IP address of 192.168.16.1. (Refer to

Troubleshooting section on how to configure TCP/IP settings on your PC.)

3. Configure the Switch

Browser Configuration

3. Click System > IP Configuration.

Then change the IP Address to be

in the same subnet as your

Network. Enter the Subnet Mask

and Gateway to match your

network. Then click Apply.

1. Open your web browser, type

http://192.168.16.1 in the Address

bar, and then press Enter.

2. Enter the User name and

Password, and then click OK.

By default:

User Name: root

Password: root

Troubleshooting

Q1:

A1:

After connecting the TEG-S811Fi to a power outlet, the LEDs do not turn on.

Check the connection of the power cord to the TEG-S811Fi and the power outlet. Also

check that the power outlet is receiving power.

Q3:

A3:

I connect the switch to my network via the mini-GBIC module, but I am unable to make a

connection.

First, verify that you are using the proper fiber cable. Second, verify that the TX and RX

cables have been reverse on the opposite Fiber connection. Third, when connecting to the

mini-GBIC modules, your Fiber connection must be Gigabit. Fourth, power down the switch.

Wait 15 seconds, then plug the switch back in.

Q4:

A4:

How do I login to the switch via the console port?

Follow the instructions below:

1) Connect the RS-232 cable from a serial port on your Windows PC to the console port on

your computer.

2) Go to Start -> Programs -> Accessories -> Communications -> Hyperterminal

3) Enter a name, select an icon and then click OK.

4) Select the correct COM port (e.g. COM1, COM2) and then click OK.

5) Enter the following, click Apply and then click OK:

Bits per second: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

6) Press Enter.

7) Enter the user name and password. By default, the user name and password is root.

Please refer to the User's Guide for a list of commands.

If you still encounter problems or have any questions regarding the TEG-S811Fi, please contact

TRENDnet’s Technical Support Department.

Q2: How do I configure TCP/IP settings on my computer?

1. Go into the Control Panel and double-clic the Network

Connections icon, right-click the Local Area

Connection icon and then click Properties.

2. Click Internet Protocol (TCP/IP) and then click

Properties. Then click on Use the following IP

address, and make sure you assign your network

adapter an IP address in the subnet of 192.168.16.x.

Certifications

This equipment has been tested and found to comply with FCC and CE Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received. Including interference that may

cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.

Waste electrical and electronic products must not

be disposed of with household waste. Please

recycle where facilities exist. Check with you Local

Authority or Retailer for recycling advice.

ADVERTENCIA

En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de

alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al

mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador

de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria

existente en el pais o zona de instalación.

20675 Manhattan Place

Torrance, CA 90501

USA

Product Warranty Registration

Please take a moment to register your product online.

Go to TRENDnet’s website at http://www.trendnet.com/register

Customer Support

[email protected]

Email:

Europe (Germany France Italy Spain Switzerland UK)

English/Espanol - 24/7

Francais/Deutsch - 11am-8pm, Monday - Friday MET

English/Espanol - 24/7

Francais/Deutsch - 11am-8pm, Monday - Friday MET

Worldwide

Telephone: +(31) (0) 20 504 05 35

Toll Free Telephone: +00800 60 76 76 67

. . . . .

Visit www.trendnet.com/support

Autres manuels pour TEG-S811Fi

Table des matières

Autres manuels TRENDnet Changer

TRENDnet

TRENDnet TEG-2248WS - Gigabit Web Smart Switch Manuel utilisateur

TRENDnet

TRENDnet TEG-S8 - Gigabit Switch Manuel utilisateur

TRENDnet

TRENDnet TE100-H24R Manuel utilisateur

TRENDnet

TRENDnet TE100-S16Eplus Manuel utilisateur

TRENDnet

TRENDnet TEG-S224 - DATA SHEETS Manuel utilisateur

TRENDnet

TRENDnet TPE-80WS - Web Smart PoE Switch Manuel utilisateur

TRENDnet

TRENDnet TE100-S24R Manuel utilisateur

TRENDnet

TRENDnet TEG-S224TXA - 26PORT Gigabit Copper Switch 24-10/100... Manuel utilisateur

TRENDnet

TRENDnet TPE-TG44G Manuel utilisateur

TRENDnet

TRENDnet TEG-ECSFP Manuel utilisateur

TRENDnet

TRENDnet PoE Web Smart Switch Series Manuel utilisateur

TRENDnet

TRENDnet TK-209K Manuel utilisateur

TRENDnet

TRENDnet TEG-S224 - DATA SHEETS Manuel utilisateur

TRENDnet

TRENDnet TI-RG262i Manuel utilisateur

TRENDnet

TRENDnet TL2-F7120 Manuel utilisateur

TRENDnet

TRENDnet TE100-S50g Manuel utilisateur

TRENDnet

TRENDnet TK-210K Manuel utilisateur

TRENDnet

TRENDnet TK-209i Manuel utilisateur

TRENDnet

TRENDnet TK-204K Manuel utilisateur

TRENDnet

TRENDnet TE100-S1212 Manuel utilisateur

TRENDnet

TRENDnet TK-IP101 Manuel utilisateur

TRENDnet

TRENDnet TPE-P521ES Manuel utilisateur

TRENDnet

TRENDnet TK-200K Manuel utilisateur

TRENDnet

TRENDnet TEG-524WS Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur