TRENDnet TEG-S80g - Switch Manuel utilisateur
Quick Installation Guide
TEG-S80g
2.01
Table of Contents
Version 09.27.2010
English 1
1. Before You Start
2. Hardware Installation 3
3. LEDs 4
1
Technical Specifications
Troubleshooting 6
5
1. Before You Start
Package Contents
?
?Multi-Language Quick Installation Guide
?PowerAdapter (5V DC, 1A)
TEG-S80g
System Requirements
1
?Acomputer with a network adapter installed
?Cat-5e or Cat-6 Network Cable
?
?
?
?
?
The surface must support at least 1.5 Kg for the Switch
The power outlet should be within 1.82 meters (6 feet) of the Switch
Visually inspect the DC power jack to make sure that it is securely connected to
the power adapter
Make sure that there is proper heat dissipation from and adequate ventilation
around the Switch
Do not place heavy objects on the Switch
2
Application
60m
Full Power
60m
100m
100m
20m
Regular
Switch
GREENnet
Switch
20m
Delivers less power
with shorter
cable lengths
3
Delivers less power
to unused ports
1
on on
less power
Delivers less power
when devices are off
2
on on
off less power
*Max power savings compared with standard TRENDnet switches.
3
2. Hardware Installation
2. Connect a CAT-5e or CAT-6 RJ-45 network
cable from the computer to an available
Ethernet port of the TEG-S80g.
1. Connect the PowerAdapter to the TEG-S80g
and then to a power outlet.
4
3. LEDs
Power
Green:Powerison
NotIlluminated:Powerisoff
Link/ACT
Green(Solid):
Link to another device.
Green(Blinking):
Activity is occurring from the link
Not Illuminated:
Nothing is detected on the port.
100Mbps/1000Mbps
Green:
Connection for the port is 2000Mbps (Full)
Amber:
Connection for the port is 100/200Mbps (Full/Half)
Non Illunimated:
Connection for the port is 10/20Mbps (Half/Full) or
nothing is detected on the port.
5
Standards IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control
IEEE 802.3az (draft 2.0)
Network Media Ethernet:
Fast Ethernet:
Gigabit Ethernet:
Cat. 3,4,5, up to 100m
Cat. 5, up to 100m
Cat. 5, 5e,6, up to 100m
Data Rate Ethernet: 10Mbps/20Mbps (full-duplex)
Fast Ethernet: 100Mbps/200Mbps (half/full-duplex)
Gigabit Ethernet: 2000Mbps (full-duplex)
Power Consumption 3.5 Watts (max.)
Switch Fabric 16Gbps forwarding capacity
Hardware
Data RAM Buffer 128KBytes
Protocol/Topology CSMA/CD, Star
Jumbo Frame Support
Filtering Table
Diagnostic LEDs
PowerAdapter
Interface 8 x 10/100/1000MbpsAuto-MDIX RJ-45 ports
8K entries
9216Bytes
Power, Link/ACT, 100Mbps/1000Mbps
5V DC, 1Aexternal power adapter
Dimension 171 x 98 x 28mm (6.7 x 3.86 x 1.1 in)
450g (15.9 oz)
Weight
Temperature Operating: 0° ~ 40° C (32° ~ 104° F)
Storage: -10° ~ 70° C (14° ~ 158° F)
Humidity Max. 90% (non-condensing)
Certifications FCC, CE
Troubleshooting
6
1.After connecting the Switch to a power outlet, the LEDs do not turn on.
Check the connection of the external power adapter to the TEG-S80g and the
power outlet.Also check that the power outlet is receiving power.
When I connect a computer to one of the ports on the Switch, the Power and
the Link/ACT LED is lit, but I am not getting Gigabit speeds.
Check the LEDs. If the 100/1000Mbps LED is amber, the computer's
connection speed is 100. If the 100/1000Mbps LED is off, the computer's
connection speed is 10Mbps.
2. Check the Ethernet Cable. Make sure you are using CAT-5e or CAT-6 Ethernet
Cables. Some CAT-5 cables are not rated to run in Gigabit.
3. Make sure that you have a Gigabit Ethernet adapter installed on your computer.
After I connect my PCs to the Switch, I am unable to share files.
Check the LEDs on the Switch. Make sure the Link/ACT LED is on.
2. Check the network cable. The minimum length of the cable is 1.5 meters and
the maximum length of the cable is 100 meters.
3. Disable any software firewall program.
4. Verify that you have file sharing enabled. Please contact your Operating System
support for more information.
After I connect my PCs to the Switch, I can only get onto the Internet from one
computer.
The Switch was not designed to share Internet between multiple computers. You
need to get an Internet router such as the TW100-S4W1CA.
Where is the uplink port located on the Switch?
Since all the ports on the Switch areAuto-MDIX, any of the ports can be used as
an uplink port.
If you still encounter problems or have any questions regarding the TEG-S80g please
contact Trendnet's Technical Support Department.
2.
1.
3. 1.
4.
5.
7
Limited Warranty
TEG-S80g - 3 Years Limited Warranty
AC/DC PowerAdapter, Cooling Fan and Power Supply carry a 1 year limited warranty
TRENDnet warrants its products against defects in material and workmanship, under normal
use and service, for the following lengths of time from the date of purchase.
If a product does not operate as warranted during the applicable warranty period, TRENDnet
shall reserve the right, at its expense, to repair or replace the defective product or part and
deliver an equivalent product or part to the customer. The repair/replacement unit's warranty
continues from the original date of purchase.All products that are replaced become the
property of TRENDnet. Replacement products may be new or reconditioned.TRENDnet
does not issue refunds or credit. Please contact the point-of-purchase for their return policies.
TRENDnet shallnot beresponsible forany software,firmware, information,or memorydata of
customer contained in, stored on, or integrated with any products returned to TRENDnet
pursuanttoanywarranty.
Therearenouserserviceablepartsinsidetheproduct. Donotremoveorattempttoservicethe
productbyany unauthorizedservice center. Thiswarrantyis voidedif (i)the producthas been
modifiedorrepairedbyanyunauthorizedservicecenter,(ii)theproductwassubjecttoaccident,
abuse, or improper use (iii) the product was subject to conditions more severe than those
specifiedinthemanual.
Warranty service may be obtained by contacting TRENDnet within the applicable warranty
period and providing a copy of the dated proof of the purchase. Upon proper submission of
requireddocumentationaReturn MaterialAuthorization(RMA) numberwillbe issued.AnRMA
number is required in order to initiate warranty service support for all TRENDnet products.
ProductsthataresenttoTRENDnetforRMAservicemusthavetheRMAnumbermarkedonthe
outsideofreturnpackagesandsenttoTRENDnetprepaid,insuredandpackagedappropriately
forsafeshipment.CustomersshippingfromoutsideoftheUSAandCanadaareresponsiblefor
return shipping fees. Customers shipping from outside of the USAare responsible for custom
charges,includingbutnotlimitedto,duty,tax,andotherfees.
8
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S
OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE
EXCLUSIVEANDARE IN LIEU OFALLOTHER WARRANTIES, EXPRESSED OR IMPLIED,
EITHERINFACTORBYOPERATIONOFLAW,STATUTORYOROTHERWISE,INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME
FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION
MAINTENANCEORUSEOFTRENDNET'SPRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT
EXISTORWASCAUSEDBYCUSTOMER'SORANYTHIRDPERSON'SMISUSE,NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR
MODIFY, ORANY OTHER CAUSE BEYONDTHE RANGE OF THE INTENDED USE, OR BY
ACCIDENT,FIRE,LIGHTNING,OROTHERHAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN
CONTRACTORTORT(INCLUDINGNEGLIGENCE),FORINCIDENTAL,CONSEQUENTIAL,
INDIRECT,SPECIAL,ORPUNITIVEDAMAGESOFANYKIND,ORFORLOSSOFREVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER
FINANCIALLOSSARISINGOUTOFORINCONNECTIONWITHTHESALE,INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE
POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR,
REPLACEMENT,ORREFUNDOFTHEPURCHASEPRICEPAID,ATTRENDNET'SOPTION.
THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY
REMEDYPROVIDEDHEREINSHALLFAILOFITSESSENTIALPURPOSE.
GoverningLaw:ThisLimitedWarrantyshallbegovernedbythelawsofthestateofCalifornia.
SomeTRENDnetproductsincludesoftwarecodewrittenbythirdpartydevelopers.Thesecodes
aresubjecttotheGNUGeneralPublicLicense("GPL")orGNULesserGeneralPublicLicense
("LGPL").
Go to or Download section and look for
the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are
distributed WITHOUT WARRANTY and are subject to the copyrights of the developers.
TRENDnet does not provide technical support for these codes. Please go to
or for specific terms of
eachlicense.
http://www.trendnet.com/gpl http://www.trendnet.com
http://www.gnu.org/licenses/gpl.txt http://www.gnu.org/licenses/lgpl.txt
PWP05202009v2
Autres manuels pour TEG-S80g - Switch
4
Table des matières
Autres manuels TRENDnet Changer
TRENDnet
TRENDnet TE100-S16 - DATA SHEETS Manuel utilisateur
TRENDnet
TRENDnet TEG-S5g - Gigabit GREENnet Switch Manuel utilisateur
TRENDnet
TRENDnet TEG-424WS Manuel utilisateur
TRENDnet
TRENDnet TK-207K - KVM Switch - USB Instructions de montage
TRENDnet
TRENDnet TK-400K - KVM Switch - PS/2 Manuel utilisateur
TRENDnet
TRENDnet TK-804R Manuel utilisateur
TRENDnet
TRENDnet TEG-160WS Manuel utilisateur
TRENDnet
TRENDnet TEG-S16Dg Manuel utilisateur
TRENDnet
TRENDnet TEG-224WS - DATA SHEETS Manuel utilisateur
TRENDnet
TRENDnet TEG-424WS Manuel utilisateur
TRENDnet
TRENDnet TU-400E Manuel utilisateur
TRENDnet
TRENDnet TK-205K - PS/2 KVM Switch Manuel utilisateur
TRENDnet
TRENDnet TEG-S28TX Manuel utilisateur
TRENDnet
TRENDnet TPE-S88 - Web Smart PoE Switch Mode d’emploi
TRENDnet
TRENDnet TEG-S240TX - DATA SHEETS Manuel utilisateur
TRENDnet
TRENDnet TEG-S224M Manuel utilisateur
TRENDnet
TRENDnet Web Smart Switch Series Manuel utilisateur
TRENDnet
TRENDnet TK-205K - PS/2 KVM Switch Manuel utilisateur
TRENDnet
TRENDnet TEG-40080ES Manuel utilisateur
TRENDnet
TRENDnet TE100-S55E Manuel utilisateur
