TRENDnet TEG-240WS Manuel utilisateur

TEG-160WS

TEG-240WS

Quick Installation Guide

Table of Contents

Version 02.02.2010

English 1

1. Before You Start

2. Hardware Installtion 2

3. Web Management Utility 3

Troubleshooting 6

1. Before You Start

Package Contents

?CD-ROM (Utility & User’s Guide)

?Multi-Language Quick Installation Guide

?2 Mounting Brackets with Screws

?Power Cord

TEG-160WS/TEG-240WS

System Requirements

?Web Browser: Internet Explorer (5.0 or above), Netscape (6.0 or above)

?Computer with Network adapter installed

?Mini-GBIC module (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40,

TEG-MGBS80, TEG-MGBS10D35, TEG-MGBS40D35) for Mini-GBIC slots

2. Hardware Installation

Note:

1. After hardware installation is complete, use the Web Browser to configure the

TEG-160WS/TEG-240WS. To access the Web Browser configuration, open your web

browser, and enter the default IP Address http://192.168.0.1 and default password

"admin". Make sure your computer and the TEG-160WS/TEG-240WS are configured

to the same network segment.

2. The Mini-GBIC slots are shared with Port 15 and 16 (TEG-160WS) and port 23 and

24 (TEG-240WS) Gigabit Ethernet ports. When the Mini-GBIC slots are in use, port

15 and 16 (TEG-160WS) and port 23 and 24 (TEG-240WS) Gigabit Ethernet ports

are disabled.

2. Connect a CAT-5e or 6 RJ-45 network cable

from the computer to an available Ethernet port

of the TEG-160WS/TEG-240WS.

1. Connect the Power Cord to the rear of the

TEG-160WS/TEG-240WS and then to a power

outlet.

2. Follow the Installation Wizard instructions.

Click OK.

1. Insert the Utility & User’s Guide CD-ROM into

your computer's CD-ROM Drive and then click

Install Utility.

3. Web Management Utility

Note: If you would like to easily discover all the Web Management Switches on the

network, assign IP Address, change the password, and upgrade to new firmware, then

install the Web Management Utility. Follow the steps below.

For Windows User

3. Click Start gProgramsg

Web_Management_Utility, and then click

Web_Management_Utility.

4. Click Discovery, and then double-click the

Switch that appears in the Discovery List.

5. Click the Switch in the Monitor List and then

click Configuration setting.

7. Click OK.

6. Configure the IP Address, Subnet mask,

Gateway, and Password. Click Set.

8. Click Access Web.

9. Type in your Password and then click Login.

By default, the Password is admin.

Your installation is now complete.

For detailed information regarding the Web-based Smart Utility configuration and advanced

settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or

TRENDnet's website at http://www.trendnet.com.

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

After connecting the TEG-160WS/TEG-240WS to a power outlet, the LEDs do

not turn on.

Check the connection of the power cord to the TEG-160WS/TEG-240WS and the

power outlet. Also check that the power outlet is receiving power.

2. After installing the Web-Management Utility, I clicked Discovery and the Utility

is unable to discover the TEG-160WS/TEG-240WS. What should I do?

Make sure that the TEG-160WS/TEG-240WS is powered on and that all

connections are secure.

2. Also check that your computer's IP Address is on the same network segment as

the TEG-160WS/TEG-240WS. The default IP Address of the

TEG-160WS/TEG-240WS is and the default password is

"admin".

3. When I access the TEG-160WS/TEG-240WS using a web browser, I get a screen

that tells me “only one user can login”. What should I do?

Another computer is configuring the TEG-160WS/TEG-240WS. Please wait until

the user logs off. If the other user has already logged off and you still get the same

screen, then disconnect the power cord from the TEG-160WS/TEG-240WS, wait

for 5 seconds, reconnect the power cord to the TEG-160WS/TEG-240WS, allow 5

seconds for the Switch to power on, and then attempt to access the web

configuration page to login.

4. I forgot the administration password. How do I reset my TEG-160WS/TEG-

240WS?

Press on the reset button using a pen or paperclip for 10 seconds. The default

password is admin.

5.When I connect a computer to the Switch's gigabit port, the LINK/ACT LED turns

on, but the 1000Mbps (TEG-160WS) or the SPEED (TEG-240WS) LED remains off.

1. For the TEG-160WS, when the 1000Mbps LED remains off, the computer's

connection speed is 10Mbps or 100Mbps (if the 100Mbps LED is on).

2. For the TEG-240WS, if the SPEED LED is off, the computer's connection speed is

10Mbps. When the SPEED LED is yellow, the computer's connection speed is

100Mbps. Make sure that you have a Gigabit Ethernet adapter installed. Also

make sure to use a Cat-5e or Cat 6 Ethernet cable.

If you still encounter problems or have any questions regarding the TEG-160WS/TEG-

240WS, please refer to the User's Guide included on the Utility CD-ROM or contact

Trendnet's Technical Support Department.

http://192.168.0.1

Troubleshooting

Autres manuels pour TEG-240WS

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TRENDnet Changer

TRENDnet

TRENDnet TE100-S8 Manuel

TRENDnet

TRENDnet 1602R - KVM Switch - PS/2 Manuel utilisateur

TRENDnet

TRENDnet TK-400K - KVM Switch - PS/2 Manuel utilisateur

TRENDnet

TRENDnet TK-210K Manuel utilisateur

TRENDnet

TRENDnet TE100-SK1 Manuel utilisateur

TRENDnet

TRENDnet TEG-424WS Manuel utilisateur

TRENDnet

TRENDnet TEG-S40TXD Manuel utilisateur

TRENDnet

TRENDnet TEG-S2400I - DATA SHEETS Manuel utilisateur

TRENDnet

TRENDnet TEG-S80g - Switch Manuel utilisateur

TRENDnet

TRENDnet TK-210K Manuel utilisateur

TRENDnet

TRENDnet TE-800plus Manuel utilisateur

TRENDnet

TRENDnet TPE-S88 - Web Smart PoE Switch Manuel utilisateur

TRENDnet

TRENDnet TEG-S2400I - DATA SHEETS Manuel d'installation et d'exploitation

TRENDnet

TRENDnet TK-408K Manuel utilisateur

TRENDnet

TRENDnet TEG-S2400I - DATA SHEETS Manuel utilisateur

TRENDnet

TRENDnet TK-1603R Manuel utilisateur

TRENDnet

TRENDnet TPE-1620WS Manuel utilisateur

TRENDnet

TRENDnet TU-400E Manuel utilisateur

TRENDnet

TRENDnet TEG-S50TXE SHEETS Manuel utilisateur

TRENDnet

TRENDnet TEG-S50TXE SHEETS Manuel utilisateur

TRENDnet

TRENDnet TEG-S81g Manuel utilisateur

TRENDnet

TRENDnet TL2-G244 Manuel utilisateur

TRENDnet

TRENDnet TPE-30284 Manuel utilisateur

TRENDnet

TRENDnet TPE-TG50g Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur