TRENDnet TV?IP450PI Manuel utilisateur
TV-IP450PI
ŸOutdoor 1.3 MP HD PoE IR Speed Dome Network Camera
ŸQuick Installation Guide (1)
TV-IP450PI (V1) /06.03.2014
1. Before You Start
1
Package Contents
Minimum Requirements
Free Management Software: TRENDnetVIEW Pro Requirements
Supported Operating Systems
Android (version 2.3 or above)
iOS (version 6.1 or above)
Free Mobile App: TRENDnetVIEW Pro Requirements
ŸTV-IP450PI
ŸCD-ROM (Utility and User's Guide)
ŸProprietary PoE Injector
ŸMulti-Language Quick Installation Guide
ŸTV-HC400, TV-HW400, TV-HP400, or TV-HN400 mounting bracket (sold separately)
ŸA computer with an Ethernet port and web browser
ŸCD-ROM Drive
ŸWired Network
ŸNetwork cable
Supported Operating Systems 1-8 Cameras
CPU CPU
9-32 Cameras
Memory Memory
Windows 8.1 (32/64-bit) /
Windows 8 (32/64-bit) /
Windows 7 (32/64-bit) /
Windows Vista (32/64-bit) /
Windows XP (32/64-bit) /
Windows Server 2012 (32/64-bit) /
Windows Server 2008 (32/64-bit) /
Windows Server 2003 (32/64-bit)
2GHz 2GHz
2GB RAM
or above
4GB RAM
or above
2
2. Hardware Installation and Configuration
1. Do not install or mount the IP camera until you complete the installation steps below. Next to
your computer, temporarily place the IP camera in the provided protective foam insert with the
dome facing up.
2. Connect a network cable from your computer to a LAN port on your network.
3. Insert the Utility CD-ROM into your CD-ROM drive.
4. Select language from the drop down menu.
5. Click Install Camera.
6. Write down the MAC address of your camera. Then click Next.
Note: To download the latest version of the Setup Wizard utility, please go to
http://www.trendnet.com/support and select the TV-IP450PI within the Products Download
dropdown list.
3
7. Connect a network cable from your network switch to the included power injector's DATA/IN
port. Connect another cable from your camera to the power injector's PoE/DATA port. The
camera will begin the self checking sequencing. Allow 60 seconds for the camera to complete
calibration. Then click Next.
Note: The TV-IP450PI must be powered with the included proprietary PoE injector.
8. Select your camera. Click Next and follow the instructions.
9. Enter a new password, confirm the new password and then click Next.
4
10. Initial Setup is complete! Your camera is now connected to your network. Click the hyperlink
to confirm access to the management page. This will open up a web browser. You will need to
download and install a plug-in to view video. Please refer to the Install Web Browser Plug-in
for Camera Management Interface section for instructions. To resume installation, minimize
the web browser and then click Next.
11. Congratulations! Your camera is now ready to be installed in its final location. Scan the QR
code to download a free mobile app to view the camera from your mobile device. Click Finish
to exit the Setup Wizard.
5
Note
ŸSee User's Guide for advanced management functions.
ŸTwo User's Guides are included – one for the camera and one for TRENDnetVIEW Pro
software.
ŸWhen viewing live video rom a web browser you will be prompted to install plug-ins for full
functionality.
ŸIt is recommended that you setup a dynamic DNS service in order to view your cameras
remotely. See your router's manual and the camera product how-tos for instructions.
13. Install the camera in your desired location. For mounting instructions, please refer to the
mounting installation guide.
12. To manage and record multiple cameras, please install the TRENDnetVIEW Pro software.
Install the software by clicking Install TRENDnetVIEW Pro in the Setup Wizard window. For
detailed instructions on software setup please refer to the TRENDnetVIEW Pro User's Guide
on the bundled CD-ROM.
6
Install Web Browser Plug-in for Camera Management Interface
Windows
1. Access the camera management interface.
2. Enter your username and password. Then press Enter.
3. Click on the link to download the plug-in.
4. When prompted to, click Run.
7
5. Click Next.
6. Click Finish.
8. Refresh your browser to view the video.
8
Mac OS X
1. Access the camera management interface.
2. Enter your username and password. Then press Enter.
3. Click on the link to download the plug-in.
4. Double click on the WebComponents.pkg file.
9
6. Click Install.
7. Click Continue.5. Click Continue.
9. Click Close.
8. Enter your computer's Username and
Password. Then click Install Software.
Autres manuels pour TV?IP450PI
1
Table des matières
Autres manuels TRENDnet Caméra de sécurité
TRENDnet
TRENDnet TV-IP110 - SecurView Internet Surveillance... Manuel utilisateur
TRENDnet
TRENDnet TV-IP862IC Manuel utilisateur
TRENDnet
TRENDnet EL-HS800 Manuel utilisateur
TRENDnet
TRENDnet TV-IP400 Manuel utilisateur
TRENDnet
TRENDnet TV-IP1315PI Manuel utilisateur
TRENDnet
TRENDnet TV?IP450PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP345PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP422 Manuel utilisateur
TRENDnet
TRENDnet TV-IP310PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP662WI Manuel utilisateur
TRENDnet
TRENDnet TV-IP312 Manuel utilisateur
TRENDnet
TRENDnet TV-IP345PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP301W Manuel utilisateur
TRENDnet
TRENDnet TV-IP551W Manuel utilisateur
TRENDnet
TRENDnet TV-IP460PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP410WN Manuel utilisateur
TRENDnet
TRENDnet TV-IP612WN Manuel utilisateur
TRENDnet
TRENDnet TV-IP100-N Manuel utilisateur
TRENDnet
TRENDnet TV-IP1313PI Manuel utilisateur
TRENDnet
TRENDnet TV-IR500 Manuel utilisateur
