Transition TN-SFP Series Manuel utilisateur

33477Rev.Fhttps://www.transition.com/Page1of10

UserGuide

TN‐SFP‐xxx

TransceiverModules

Hot‐PluggableSFPLCOpticalTransceivers

DigitalDiagnosticFunction

Class1LaserInternationalSafetyStandardIEC‐60825Compliant

CompatiblewithSmallFormFactorPluggableMulti‐SourcingAgreement(MSA)

Contents

Introduction...............................................................................................................................................................1

Description................................................................................................................................................................1

SpecificationsandStandards.....................................................................................................................................2

OpticalSpecifications................................................................................................................................................2

Application:FiberConnectionswithSFPs.................................................................................................................2

SFPUnpacking...........................................................................................................................................................3

SFPInstallation..........................................................................................................................................................3

Cautions................................................................................................................................................................3

InstallinganSFPModule.......................................................................................................................................4

FiberCablePhysicalCharacteristics......................................................................................................................5

ConnectingFiberCables........................................................................................................................................5

RemovinganSFPModule.....................................................................................................................................5

DiagnosticMonitoringInterface(DMI).....................................................................................................................6

DDMI(DigitalDiagnosticsMonitoringInterface)......................................................................................................7

ContactUs.................................................................................................................................................................8

ForMoreInformation................................................................................................................................................8

ComplianceInformation............................................................................................................................................8

ULRecognized.....................................................................................................................................................10

RecordofRevisions.................................................................................................................................................10

Introduction

TheTransitionNetworksTN‐SFP‐xxxseriessmallformfactorpluggable(SFP)transceivermodulesaredesigned

toinstallinanySFPslot,andconnectmultimode1000Base‐SXorsinglemode1000Base‐LXfiber‐opticcableto

thenetworkthroughtheSFPconnector.TheTN‐SFPxxxtransceiversaredesignedforbi‐directional,serial‐optical

datacommunicationssuchasGigabitEthernetandfiberchannelatspeedsupto4.25Gbps.

Description

AllofTransition’sSFPsandXFPsarecompliantwiththeMulti‐SourcingAgreement(MSA)ensuring

interoperabilitywithallotherMSAcompliantnetworkingdevices.

Simplex LC SFPs

100BASE-FX/OC-3

OC-12/STM-4

1000BASE-BX

1000BASE-SX

1000BASE-LX

100/1000Base-LX dual speed

Duplex LC SFPs

100BASE-FX/OC-3

OC-12/STM-4

1000BASE-SX

1000BASE-LX

OC-48/STM-16/ Fibre Channel 1x/2x/4x/1000BASE-X

Fibre Channel 1x/2x/4x/1000BASE-X Copper SFP

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.F http://www.transition.com/Page2of10

Specifications and Standards

TheTN‐SFP‐xxxwasdesignedtomeetthesestandardsandspecifications:

Standards IEEE 802.3 2003; ANSI X3.297-1997

Compliance IEC-60825; FDA 21; CFR 1040.10 and 1040.11

Dimensions Width: 0.52" [13 mm] x Depth: 2.18" [55 mm] x Height: 0.33" [8 mm]

Power 3.3V

Power Consumption 0.66 watts

Environment 0°C to 70°C

Shipping Weight 1 lb. (454 g) approximately

Voltage 3.3 volts

Operating Temp -10°C – 85°C: TN-SFP-SX, TN-SFP-SXD, TN-SFP-LX1, TN-SFP-ESX5, TN-SFP-OC3S3,

TN-SFP-ESX6, TN-SFP-FC2XM, TN-SFP-FC2XS2.

Operating Temp 0°C – 70°C: TN-SFP-ELX1, TN-SFP-LX3, TN-SFP-LX5, TN-SFP-LX8, TN-SFP-LX12, TN-

SFP-Ocx, TN-SFP-LX16, TN-SFP-LXBxx, TN-SFP-FC4Xxx, TN-SFP-FC2XS40, TN-SFP-

FC2XS15, TN-SFP-TX, TN-SFP-T-MG, TN-SFP-GE-100FX.

Operating Temp -20°C to + 85°C: TN-SFP-STM1E.

Operating Temp -40°C to + 85°C: TN-SFP-LX1T, TN-SFP-LX3T, TN-SFP-LXB11T, TN-SFP-LXB12T, TN-

SFP-LXB21T, TN-SFP-LXB22T.

Storage Temp -40°C to +85°C (-40° to +185°F)

MTBF At Ambient Temp. 85 °C: 600,000 Hrs.

At Ambient Temp. 80 °C: 730,964 Hrs.

Warranty Lifetime

TransitionNetworks'SFPmodulesfullycomplywithMulti‐SourcingAgreement(MSA).Thiscomplianceallows

ourSFPmodulestobeusedinotherMSAcompliantSFPplatformswithoutanyproblems.

Optical Specifications

OpticalspecsforallTransitionNetworks’SFPsareathttps://www.transition.com/lines/optical‐devices/.

Application: Fiber Connections with SFPs

SFPsareusedwithGigabitEthernetSwitchesandRouters,FibreChannelSwitchInfrastructure,xDSL

applications,MetroEdgeSwitching,etc.

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.Fhttps://www.transition.com/Page3of10

SFP Unpacking

Before you start installing the TN-SFP-xxx, verify that the package contains the following items:

oOne TN-SFP-xxx

oOne protective foam piece

oOne Documentation Postcard

Notify your sales representative immediately if any of the aforementioned items is missing or damaged. Save the

packaging for possible future use.

SFP Installation

Cautions

The SFP transceiver module is keyed to only be installed one way. However, if forced the wrong way,

damage may occur.

The SFP transceiver module may be damaged if directly connected with short fiber cable without an

attenuator.

Avoid getting dust or other contaminants into the fiber bore of the SFP transceiver module, as this will cause

the optics to not operate properly.

Clean the optic surfacees of the optical fiber before you plug them back in to the optical bores of another SFP

transceiver module. See the Fiber Optic Association, Inc. Cleaning Fiber Optic Connections page on the FOA

website at www.thefoa.org/tech/ref/termination/cleaning.html for more information.

Each port must match the wavelength specifications on the other end of the cable, and the cable must not

exceed the specified cable length for reliable communications.

Note that the NM2-FXS-2230-SFP-01 SFP transceiver is sold separately and also as a part of Transition

Networks’ NM2-FXS-2230-SFP-01 M.2 100-Base-FX Ethernet Fiber NIC. See the NM2-FXS-2230-SFP-01

manual for more information on the SFP bundled with the M.2 NIC.

See the Optical Power Budget calculator at https://www.transition.com/support/library/calculators/.

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.F http://www.transition.com/Page4of10

Installing an SFP Module

1. Attach an ESD-preventive wrist strap to your wrist and to the ESD ground connector or a bare metal surface

on your chassis.

2. Remove the SFP transceiver module from its protective packaging. Note: Do not remove the optical bore dust

plugs until directed to do so in a later procedure.

3. Check the slot orientation. Note that for some devices (e.g., S4224) some slots are “upside down” compared

to other slots.

4. Position the SFP device at the desired installation slot, with the label facing correctly.

5. Carefully slide the SFP device into the slot, aligning it with the internal installation guides.

6. Ensure that the SFP device is firmly seated against the internal mating connector. To verify that the SFP is

seated and latched properly:

a) Grasp the SFP by the sides and try to remove it without releasing the latch.

b) If the SFP can not be removed, it is installed and seated properly. If the SFP can be removed, reinsert it

and press harder with your thumb; repeat if necessary until it is latched securely into the socket.

7. Connect the fiber cable to the fiber port connector of the SFP device. Make sure the SFP release latch is in

the up (closed) position when you insert the cable connector into the SFP.

8. Remove the dust plug from the connector. Save the dust plug for future use.

9. Attach an appropriate cable into the SFP module port.

10. Attach the other end of the cable into the other device.

11. Observe the status LED(s). See the related manual for details.

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.Fhttps://www.transition.com/Page5of10

Fiber Cable Physical Characteristics

The fiber cable physical characteristics must meet or exceed IEEE 802.3ae specifications:

Single mode fiber (recommended): 9 μm

Multimode fiber (recommended): 62.5/125 μm

Multimode fiber (optional): 100/140, 85/140, 50/125 μm

MMF Media TN-SFP-GE-100FX: 1310 nm

Warning: Visible and invisible laser radiation when open. DO NOT stare into laser beam or view directly with

optical instruments. Failure to observe this warning could result in damage to your eyes or blindness.

Connecting Fiber Cables

To install the fiber cable, do the following:

1. Locate the appropriate fiber cable.

2. Install the cable as shown below.

Removing an SFP Module

Caution: Be careful when removing the SFP or SFP+ from a device. Some SFP transceiver module

temperatures may exceed 160°F (70°C) and be too hot to touch with bare hands. Note: Do not remove and

replace the SFP modules more often than necessary; excessive SFP removing and replacing can shorten the

SFPs useful life.

1. Attach an ESD-preventive wrist strap to your wrist and to the ESD ground connector or a bare metal surface

on your chassis.

2. For future reattachment of fiber-optic cables, note which connector plug is send (TX) and which is receive

(RX).

3. Remove the SFP transceiver module:

a. If the SFP transceiver module has an actuator button latch, gently press the actuator button on the front

of the SFP transceiver module until it clicks and the latch mechanism releases the SFP transceiver module

from the socket connector. Grasp the actuator button between your thumb and index finger, and carefully pull

the SFP transceiver module straight out of the module slot.

b. If the SFP transceiver module has a bail clasp latch, pull the latch out and down to eject the SFP

transceiver module from the socket connector. If the bail clasp latch is obstructed and you cannot use your

index finger to open it, use a small, flat-blade screwdriver or other long, narrow instrument to open the bail

clasp latch. Grasp the SFP transceiver module between your thumb and index finger, and carefully remove it

from the socket.

4. Replace the Dust Plug.

5. Place the removed SFP/SFP+ transceiver module in an antistatic bag or other protective package.

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.F http://www.transition.com/Page6of10

Diagnostic Monitoring Interface (DMI)

The following DMI port screen and explanation table contains brief definitions of the DMI support offered on some

SFP Transceiver Modules. For further information, see the help option on the CPSMM-xxx, SNMP agent, or

Transition Networks Focal Point or ION System GUI. Note: This feature is not available on all devices and may

vary between products. See the related manual for specific information.

TN-SFP distances, TX power, RX power, and link budgets can be found on Transition Networks website,

document “SFP/XFP Fiber and Copper Connectors at https://www.transition.com/lines/optical-devices/.

The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-825/CDRH standards

and comply with 21 CFR1040.10 and 21CFR1040.11.

WARNING: Visible and invisible laser radiation when open. Do not stare into the beam or view the beam directly

with optical instruments. Failure to observe this warning could result in an eye injury or blindness.

IMPORTANT: Copper based media ports such as Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1,

DS3, Video Coax, etc., are intended to be connected to intra-building (inside plant) link segments that are not

subject to lightening transients or power faults. Copper-based media ports such as Twisted Pair (TP) Ethernet,

USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter-building (outside

plant) link segments that are subject to lightening transients or power faults.

The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the

module must be terminated with an optical connector or with a dust plug.

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.Fhttps://www.transition.com/Page7of10

DDMI (Digital Diagnostics Monitoring Interface)

DDMI (Digital Diagnostics Monitoring Interface) provides enhanced digital DMI for optical transceivers which

allows real time access to device operating parameters.

The following DDMI port screen and explanation table contains brief definitions of the DDMI support offered on

some Small Form Factor Pluggable (SFP) Transceiver Modules. For further information, see the help option or

User Guide for the S3290, S4140, S4212, and S4224. Note: This feature is not available on all devices and may

vary between products. See the related manual for more information.

The Transceiver Information and DDMI Information sections are described below.

DDMI Parameter Description

DMI Rx Power (uW) Intrusion Threshold; a level for Rx Power on the Fiber port.

If the DMI read value falls below the preset value, an intrusion is detected, and

a trap is generated. The default is 0 uW. The range is 0 - 65,535 uW.

Port The device’s port number.

Vendor The SFP vendor’s name (e.g., Transition).

Part Number The SFP vendor Part number provided by the SFP vendor (TN-10GSFP-SR).

Serial Number The SFP Vendor Serial number provided by the SFP vendor (e.g., 8672105).

Revision The SFP vendor Revision level for part number provided by the SFP vendor.

Date Code The vendor's manufacturing date code (e.g., 2011-08-09).

Transeiver The Transceiver compatibility (e.g., 1000BASE_SX or 10G).

Current The current value of temperature, voltage, TX bias, TX power, and RX power.

High Alarm Threshold The high alarm threshold value of temperature, voltage, TX bias, TX power,

and RX power.

High Warn Threshold The high warn threshold value of temperature, voltage, TX bias, TX power,

and RX power.

Low Warn Threshold The low warn threshold value of temperature, voltage, TX bias, TX power, and

RX power.

Low Alarm Threshold The low alarm threshold value of temperature, voltage, TX bias, TX power,

and RX power.

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.F http://www.transition.com/Page8of10

Technical Support: Technical support is available 24-hours a day. US and Canada: 1-800-260-1312

International: 00-1-952-941-7600

Main Office

tel: +1.952.941.7600 | toll free: 1.800.526.9267 | fax: 952.941.2322

sales@transition.com | techsupport@transition.com | [email protected]

Address

Transition Networks

10900 Red Circle Drive

Minnetonka, MN 55343, U.S.A.

For More Information

Technical information in this document is subject to change without notice. For more information see Transition

Networks Optical Devices webpage.

Compliance Information

Class I Laser Compliance

This product has been tested and found to comply with the limits for FDA Class I laser for IEC60825, EN60825,

and 21CFR1040 specifications.

Translated Safety Warnings

Warning Class I laser product. Advarsel Laserprodukt av klasse I.

Waarschuwing Klasse-I laser produkt. Aviso Produto laser de classe I.

Varoitus Luokan I lasertuote. ¡Advertencia! Producto láser Clase I.

Attention Produit laser de classe I Varning! Laserprodukt av klass I.

Warnung Laserprodukt der Klasse I. Aviso Produto a laser de classe I.

Avvertenza Prodotto laser di Classe I. Advarsel Klasse I laserprodukt.

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will

be required to correct the interference at the user's own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio

interference regulations of the Canadian Department of Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux

appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le

ministère des Communications du Canada.

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.Fhttps://www.transition.com/Page9of10

European Regulations

Warning

This is a Class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Achtung !

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes

Rundfunkstörungen auftreten. In diesem Fäll is der Benutzer für Gegenmaßnahmen verantwortlich.

Attention !

Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences

radioélectriques, il appartiendra alors à l'utilsateur de prende les measures spécifiques

appropriées.

In accordance with European Union Directive 2002/96/EC of the European Parliament and of the

Council of 27 January 2003, Transition Networks will accept post usage returns of this product for

proper disposal. The contact information for this activity can be found in the 'Contact Us' portion of this document.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EGMitgliedstaaten

verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur

Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen

einschliesslich der gegenseitigen Anerkennung ihrer Konformität.

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC

TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public

telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EGMitgliedstaaten

verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur

Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen

einschliesslich der gegenseitigen Anerkennung ihrer Konformität.

TransitionNetworksTN‐SFP‐xxxUserGuide

33477Rev.F http://www.transition.com/Page10of10

UL Recognized

TN‐SFP‐10G‐SR

TN‐SFP‐10G‐LR

TN‐GLC‐T‐MG

TN‐GLC‐LH‐SM

TN‐GLC‐LX‐SM‐RGD

TN‐GLC‐SX‐MM

TN‐GLC‐SX‐MM‐RGD

TN‐GLC‐BX‐U

TN‐GLC‐BX‐D

TN‐GLC‐LHX‐SM

TN‐SFP‐GE‐L

TN‐SFP‐GE‐S

TN‐GLC‐FE‐100FX

TN‐GLC‐BX‐U‐20

TN‐GLC‐BX‐D‐20

TN‐GLC‐LH‐SMD

TN‐GLC‐T

TN‐GLC‐FE‐100LX

TN‐SFP‐OC3M

TN‐SFP‐OC3S

TN‐SFP‐SX

TN‐SFP‐LX1

TN‐SFP‐LXB11

TN‐SFP‐LXB12

Record of Revisions

Rev Date Notes

A 9/30/13 Initial release.

B 4/27/16 Revised operating temperatures, updated contact information and format.

C 11/22/16 Update MTBF and contact information.

D 6/5/17 Added TN-SFP-GE-100FX information.

E 11/27/17 Added TN-SFP-LX8-CxxT (Temperature Hardened CWDM SFP)...

F 6/12/19 Add UL information.

Trademarks: All trademarks and registered trademarks are the property of their respective owners.

used in any form or by any means - graphic, electronic or mechanical - without written permission from Transition Networks.

Autres manuels pour TN-SFP Series

Ce manuel convient aux modèles suivants

Table des matières

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur