Transcend TS128M~8GJF2A Manuel utilisateur

128MB~8GB JetFlash™

User’s Manual

P/N: TS128M~8GJF2A

( Version 1.1 )

Table of Contents

Introduction

Package Contents ....................................................................................................1

Features ....................................................................................................................1

System Requirements ..............................................................................................2

Driver Installation

Driver Installation for Windows 98SE .....................................................................2

Driver Installation for Windows Me, 2000, and XP .................................................4

Driver Installation for Mac OS 9.0 or Later .............................................................4

Driver Installation for Linux Kernel 2.4.2 or Later..................................................4

Uninstall the Win98 Driver .........................................................................4

To Safely Unplug JetFlash

To Remove JetFlash in Windows 98SE ..................................................................5

To Remove JetFlash in Windows Me, 2000, and XP ..............................................5

To Remove JetFlash in Mac OS...............................................................................6

To Remove JetFlash in Linux ..................................................................................6

Boot-Up Function

System Requirements for Boot-Up Function .........................................................7

Boot-Up Function for Windows 98SE and Me........................................................7

Format Introduction .................................................................................................8

Create One Partition.................................................................................................9

Create Two Partitions.............................................................................................12

Security Function

Security Function for Windows 98SE, Me, 2000, and XP ....................................15

Use of JetFlash with Security Function Enabled.................................................18

Change the Password ............................................................................................19

If You Forget the Password ...................................................................................19

PC-Lock Function

Use of JetFlash with PC-Lock Function Enabled ................................................20

Specifications ..................................................................................................22

Ordering Information...................................................................................22

JetFlash Limited Warranty

Introduction

Thank you very much for purchasing Transcend’s JetFlash™. This small device is designed

to expedite exchanging huge amounts of data between any desktop or notebook computer

with a USB port. With higher storage capacity and a much faster data transfer rates than

other typical portable storage media, it can easily replace floppy diskettes and hard disks. In

addition, its mobility, superior data retention ability, and impressive appearance will provide

you with a brand-new data-storage experience.

Package Contents

The JetFlash package includes the following items:

• JetFlash

• Label

• Neck Strap

• Driver CD

• USB Extension Cable

• Quick Installation Guide

Features

• Fully compatible with USB 2.0 specification

• Easy Plug and Play installation

• Driverless (Only Windows®98SE needs the enclosed driver)

• Powered via the USB port. No external power or battery needed

• Security Function: Password protection provided

• Boot-Up Function: Makes JetFlash a bootable device

• PC-Lock Function: Makes JetFlash a key to lock your computer

• LED indicates the usage status of the JetFlash

System Requirements

Desktop or notebook computer with USB port

One of following operating systems:

• Windows® 98SE

• Windows® Me

• Windows® 2000

• Windows® XP

• Mac™ OS 9.0 or later

• Linux™ Kernel 2.4.2 or later

Driver Installation

Driver Installation for Windows 98SE

1. Put the Driver CD into the CD-ROM (Auto-Run supported). Click the Win98 Driver

button.

2. Select Install or update driver. Click Start to continue.

3. After Install or update driver is completed, click OK.

4. Plug JetFlash into an available USB port. A new Removable Disk drive with a newly

assigned drive letter appears in the My Computer window.

Driver Installation for Windows Me, 2000, and XP

No driver is required. These Windows operating systems have built-in drivers to support

JetFlash. Simply plug JetFlash into an available USB port, and Windows will install the files

needed to use your device. A new Removable Disk drive with a newly assigned drive letter

appears in the My Computer window.

Driver Installation for Mac OS 9.0 or Later

No driver is required. Just plug JetFlash into an available USB port and your computer will

automatically detect it. A new Disk icon appears on the Desktop.

Driver Installation for Linux Kernel 2.4.2 or Later

No driver is required. Just plug JetFlash into the USB port and mount it.

Example: 1. First create a directory for JetFlash

mkdir /mnt/jetflash

2. Mount JetFlash

mount –a –t msdos /dev/sda1 /mnt/jetflash

Uninstall the Win98 Driver

1. Put the Driver CD into the CD-ROM (Auto-Run supported). Click the Win98 Driver

button.

2. Select Uninstall driver. Click Start to continue.

3. After Uninstall driver has been completed, click OK.

To Safely Unplug JetFlash

To Remove JetFlash in Windows 98SE

Unplug JetFlash from your system directly when data is not being transferred.

To Remove JetFlash in Windows Me, 2000, and XP

1. Click the icon on the system tray.

2. The Stop USB Mass Storage Device pop-up menu appears. Click it to continue.

3. Follow the on-screen instructions to complete the procedure.

4. The Safe To Remove Hardware message window appears. JetFlash is now ready to

be unplugged.

To Remove JetFlash in Mac OS

Drag and drop the Disk icon corresponding to JetFlash into the trashcan. Then unplug

JetFlash from the USB port.

To Remove JetFlash in Linux

Un-mount the device from the Linux environment.

Example: umount /mnt/jetflash

WARNING: Before removing your JetFlash, please make sure the LED is off and

not flashing!If you remove the JetFlash while the LED is flashing, unpredictable damage

may occur to the files and/or your JetFlash due to a write cache fault.

Boot-Up Function

For systems that use Windows 98SE or Me, JetFlash can be configured to serve as an

MS-DOS Boot Disk. Upon completion of the appropriate procedure for your operating system

as described below, JetFlash can be used to boot up your computer, allowing you to run

MS-DOS programs. JetFlash can start up your computer by using USB-ZIP or USB-HDD

boot-up functions. This does not make JetFlash a Rescue Disk for Windows, or put

Windows Startup files onto JetFlash. After booting with JetFlash, the system is started in

the MS-DOS command screen. If you wish to enter Windows, you must restart Windows

from your hard drive or a previously created Rescue Disk.

System Requirements for the Boot-Up Function

•

A desktop or notebook computer that supports USB-ZIP or USB-HDD as the

First Boot Device in BIOS

Windows 98SE or Me on the C: drive

Any anti-virus program present must be turned off

Boot-Up Function is not supported for Mac or Linux Operating Systems.

If choosing to use the Boot-Up function, please be aware that there is a

maximum capacity size of 512MB (or less) apportioned to the Boot-Up disk

sector; this applies to both the USB-ZIP and USB-HDD formats.

To use the Boot-Up function, you must be logged on to the Windows OS with

Administrator privileges.

Boot-Up Function for Windows 98SE and Me

You must run the mFormat Utility program on the JetFlash to enable this feature. This

procedure will reformat the JetFlash and erase any data saved to the JetFlash memory. In

order to avoid loss of data, please backup the files before proceeding. Put the Driver CD into

the CD-ROM (Auto-Run supported) and click the mFormat Utility button.

When the mFormat Utility main window appears, click the Format button.

Format Introduction

JetFlash Product Number,

Drive Letter and Capacity

Information of Partitioned Disk 1

Disk-Volume bar. Use it to make

two partitions and adjust the

capacity sizes. The minimum

size is 2MB.

Information of Partitioned Disk 2

Progress bar

Type of Format

Quick: Erase and check blocks at the same time. If there are any bad blocks, mark

them as Bad and perform a DOS format.

Full: Do a Surface Scan for a Read/Write Check. A Read/Write Check can find if

there is any bad block which will be marked as Bad and perform a DOS format.

Configure device only: Partition JetFlash, and set up password protection and

boot-up information.

Configure device only cannot be setup under password protection.

WARNING: All data on JetFlash will be lost during execution of this procedure!

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Transcend Stockage

Transcend

Transcend SD Manuel utilisateur

Transcend

Transcend StoreJet TS500GSJ25M-R Manuel utilisateur

Transcend

Transcend TS4G-32GSDHC6-P2 Manuel utilisateur

Transcend

Transcend 2.5" 80GB StoreJet TS80GSJ25 Manuel utilisateur

Transcend

Transcend JetFlash V33p Manuel utilisateur

Transcend

Transcend Compact Flash Card CF 266X Manuel utilisateur

Transcend

Transcend StoreJet 18 mobile Manuel utilisateur

Transcend

Transcend TS2GIFD25 Manuel

Transcend

Transcend Portable Hard Disk TS40GHDU1 Manuel utilisateur

Transcend

Transcend JETFLASHTM TS32M-2GJF2B Manuel utilisateur

Transcend

Transcend StoreJet 35T Manuel utilisateur

Transcend

Transcend Secure Digital Card SD80 Manuel utilisateur

Transcend

Transcend TS2GUSD-P3 Manuel

Transcend

Transcend CompactFlash CF 133X Manuel utilisateur

Transcend

Transcend StoreJet SJ25M Manuel utilisateur

Transcend

Transcend Computer Drive Manuel utilisateur

Transcend

Transcend StoreJet SJM100 Manuel utilisateur

Transcend

Transcend SSD18C3 Manuel utilisateur

Transcend

Transcend TS128MJF-DSC Manuel utilisateur

Transcend

Transcend JetFlash 150 Series Manuel utilisateur

Transcend

Transcend StoreJet 25F Manuel utilisateur

Transcend

Transcend JetFlash TS2GJFT5T Manuel utilisateur

Transcend

Transcend ExpressCard SSD34E Manuel utilisateur

Transcend

Transcend JetFlash 820 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur