Transcend JETFLASHTM TS32M-2GJF2B Manuel utilisateur
32MB–4GB JetFlash™
User’s Manual
P/N TS32M-2GJF2B
TS64M-512MJF2L
TS4GJF2C
Table of Contents
Introduction
Package Contents..............................................................................................................1
Features..............................................................................................................................1
System Requirements .......................................................................................................1
Driver Installation
Driver Installation for Windows 98SE ..............................................................................2
Driver Installation for Windows Me, 2000, and XP ..........................................................2
Driver Installation for Mac OS 9.0 or Later ......................................................................2
Driver Installation for Linux Kernel 2.4 or Later..............................................................2
Security Function
Partition Types ...................................................................................................................3
Security Function for Windows 98SE, Me, 2000, and XP ...............................................4
Access Data in Security Area ...........................................................................................5
Log Out of Security Area...................................................................................................7
Change Password..............................................................................................................8
If You Forget the Password...............................................................................................9
PC-Lock Function
PC-Lock Function for Windows 98SE, Me, 2000, and XP ...............................................9
Lock Your Computer........................................................................................................10
Unlock Your Computer .................................................................................................... 11
Boot-Up Function
System Requirements for Boot-Up Function ................................................................ 11
Boot-Up Function for Windows 98SE and Me ............................................................... 11
Boot-Up Function for Windows XP ................................................................................13
Recovery Function………………………………………………………………………16
Safely Remove Your JetFlash
Remove JetFlash in Windows 98SE...............................................................................17
Remove JetFlash in Windows Me, 2000, and XP ..........................................................17
Remove JetFlash in Mac OS ...........................................................................................18
Remove JetFlash in Linux...............................................................................................18
Uninstall the Win98 Driver……..……………………………………………………18
Troubleshooting……..……………………………………………………………………19
Specifications………………………………………………………………………………21
Ordering Information…..………………………………………………………………21
JetFlash Limited Warranty
Introduction
Thank you very much for purchasing Transcend’s JetFlash™. This small device is designed to
expedite the exchange of huge amounts of data between any desktop or laptop computers with a
USB port. With a higher storage capacity and a much faster data transfer rate than other typical
portable storage media, JetFlash can easily replace floppy diskettes and hard disks. In addition,
its mobility, strong data retention ability, and impressive appearance will provide you with a
brand-new data storage experience.
Package Contents
The JetFlash package includes the following items:
• JetFlash
• Label
• Neck Strap
• Driver CD
• USB Extension Cable
• Quick Installation Guide
Features
• Fully compatible with USB 2.0
• Easy Plug and Play installation
• Security Function: Password protection provided
• PC-Lock Function: Make JetFlash the key to lock your computer
• Boot-Up Function: Make JetFlash a bootable device
• Recovery Function: Return JetFlash to its initial status
• Driverless (Only Windows®98SE needs the enclosed driver)
• Powered via the USB port. No external power or battery needed
• LED indicates the usage status of JetFlash
System Requirements
• Hardware: Desktop or notebook computer with USB port
• Operating System: Windows® 98SE, Windows® Me, Windows® 2000 or Windows® XP
Mac™ OS 9.0 or later, Linux™ kernel 2.4 or later
1
Driver Installation
Driver Installation for Windows 98SE
1. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Select the Win98 Driver
button.
2. Follow the on-screen instructions to complete the driver installation.
3. Plug your JetFlash into an available USB port. A new Removable Disk drive with a newly
assigned drive letter will appear in the My Computer window.
Driver Installation for Windows Me, 2000, and XP
No driver is required. These Windows operating systems have built-in drivers to support JetFlash.
Simply plug JetFlash into an available USB port, and Windows will install the files needed to use
your device. A new Removable Disk drive with a newly assigned drive letter will appear in the My
Computer window.
Driver Installation for Mac OS 9.0 or Later
No driver is required. Just plug JetFlash into an available USB port and your computer will
automatically detect it. A new Disk icon will appear on the Desktop.
Driver Installation for Linux Kernel 2.4 or Later
No driver is required. Just plug JetFlash into the USB port and mount it.
Example: 1. Create directory for JetFlash first
mkdir /mnt/jetflash
2. Mount JetFlash
mount –a –t msdos /dev/sda1 /mnt/jetflash
2
Security Function
You must use the U-Storage Tool found on the Driver CD to enable the Security function. Before
using the U-Storage Tool, carefully read the following sections.
3
3
The Security function is not supported in Mac and Linux Operating Systems.
To use the Security function, you must login into the Windows OS with Administrator rights.
Partition Types
U-Storage Tool can be used to partition JetFlash into three partition types. Before partitioning,
you need to understand the following terms and concepts.
Type 1: “Public Area Only”
This is the default partition type for JetFlash. It allows the entire volume of JetFlash memory to be
accessed by anyone. No secure data area is established.
Public Area
“Public Area Only”
Type 2: “Security Area Only”
This is the security partition type for JetFlash. It secures data in the Security Area and protects
all of them by password.
Security Area
“Security Area Only”
Type 3: “Public and Security Area”
JetFlash is partitioned into a single Logical Unit Number (LUN) identified device, which contains a
Public Area and a Security Area. Secure data can be established in the Security Area, which is
protected by password. Access to data in the Public Area is unrestricted.
Log Out / Log In Security Area
Public Area
“Public and Security Area”
Security Function for Windows 98SE, Me, 2000, and XP
The default configuration of your JetFlash is“Public Area Only”. To establish a Security Area
on your JetFlash, follow the procedures below to partition JetFlash as“Security Area Only”or
“Public and Security Area”.
1. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Plug your JetFlash into an
available USB port of your computer and select the U-Storage Tool button.
2. Select Create Partition button in the U-Storage window.
3. Select the partition type you need.
a.
b.
c.
To partition your JetFlash to the default type, i.e.,“Public Area Only.” Choose the
Public Area Only, and then select OK.
To partition your JetFlash to“Security Area Only”, select Security Area Only and
select OK.
To partition your JetFlash to“Public and Security Area”, select Public and Security
Area and enter the memory sizes to be apportioned to the Security Partition Area.
4
i.
ii.
iii.
iv.
The minimum size apportioned to Security Partition Area is 2MB, and the maximum
cannot exceed or equal to Total Storage Size.
Key in a New Password.(Maximum size for password is 8 characters.)
Key in a Password Hint, to set up a reminder for your new password.
Select OK.
4. The Warning window will appear to remind you to back up all the data on your JetFlash.
Select Yes to continue or No to stop.
5. Once the partition is finished, the Resize information window will appear. Select OK.
Access Data in Security Area
1. Plug in your JetFlash and double-click the U-Storage icon.
5
2. Select the Login button after the U-Storage window appears.
3. Enter the correct password and select OK.
If a Password Hint was set up during the partition procedure, you can select the Hint
button to display your Password Hint to help you to remember the password.
You are allowed three tries to input the correct password. After three wrong tries, the
following message will appear. Unplug JetFlash and plug it in again to be allowed three
6
more tries to input the correct password to unlock the restricted data in the Security Area.
4. The warning message will appear. Verify that there isn’t any data being transferred to or from
your JetFlash before login/logout, and select OK to login.
5. The Removable Disk window will appear. The Security Area is ready for use.
After login, the icon will appear in the system tray. You can right-click the icon to
select U-Storage, Logout, or Exit.
Log Out of Security Area
1. Make sure that all files are closed and that there isn’t any data being transferred to or from your
JetFlash.
In Windows 2000, the File Manager must be closed.
7
2. Double-click the icon in the system tray and the warning message will appear. Close all of
the applications and documents opened on JetFlash and select OK to logout. Once you have
successfully completed Log Out of the Security Area of JetFlash, only data in the Public Area
is accessible.
Change Password
1. Right-click the icon in the system tray to select U-Storage.
2. The U-Storage window will appear. Select the Manage Password button.
3. Input the Old Password and enter the new password in both the New Password and the
Confirm New Password fields. (Maximum size for a password is 8 characters.)
4. Input a Password Hint to set up a reminder for your new password.
8
Autres manuels pour JETFLASHTM TS32M-2GJF2B
1
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Transcend Stockage
Transcend
Transcend Memory Card 2GSDM80 Manuel utilisateur
Transcend
Transcend JetFlash TS2GJFT5T Manuel utilisateur
Transcend
Transcend JetFlash V33p Manuel utilisateur
Transcend
Transcend JetFlash T3 Manuel utilisateur
Transcend
Transcend CF 80X TS32M~1GCF80 Manuel utilisateur
Transcend
Transcend Memory Stick MS Instructions de montage
Transcend
Transcend StoreJet Cloud Manuel utilisateur
Transcend
Transcend TS500GSJ25F Manuel utilisateur
Transcend
Transcend StoreJet 25 mobile Manuel utilisateur
Transcend
Transcend Secure Digital Card TS2GSD133 Manuel utilisateur
Transcend
Transcend StoreJet 25M2 Manuel utilisateur
Transcend
Transcend microSD Manuel utilisateur
Transcend
Transcend ExpressCard SSD34E Manuel utilisateur
Transcend
Transcend StoreJet 25M Manuel utilisateur
Transcend
Transcend CompactFlash TS1G-32GCF133 Manuel utilisateur
Transcend
Transcend USB JetFlash Manuel utilisateur
Transcend
Transcend TS120GSJ25T Manuel utilisateur
Transcend
Transcend JetDrive SSD Upgrade Kit Manuel utilisateur
Transcend
Transcend StoreJet 18 mobile Manuel utilisateur
Transcend
Transcend TS1~2GUSD-S3 Manuel
Manuels Stockage populaires d'autres marques
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur
Dell
Dell PowerVault MD3600f Series Manuel utilisateur