Transcend 128MB-4GB JetFlash Manuel utilisateur
128MB–4GB JetFlash™
User’s Manual
P/N TS128M-4GJF110
Table of Contents
Introduction
Package Contents..............................................................................................................1
Features..............................................................................................................................1
System Requirements .......................................................................................................1
Driver Installation
Driver Installation for Windows 98SE ..............................................................................2
Driver Installation for Windows Me, 2000, and XP ..........................................................2
Driver Installation for Mac OS 9.0 or Later ......................................................................2
Driver Installation for Linux Kernel 2.4 or Later..............................................................2
Partition & Security Function
Partition Types ...................................................................................................................3
Access Data in the Security Area .....................................................................................5
Log Out of Security Area...................................................................................................6
Change Password..............................................................................................................6
If You Forget the Password...............................................................................................8
PC-Lock Function
PC-Lock Function for Windows 98SE, Me, 2000, and XP ...............................................8
Lock Your Computer..........................................................................................................9
Unlock Your Computer ......................................................................................................9
Boot-Up Function
System Requirements for Boot-Up Function ................................................................10
Boot-Up Function for Windows 98SE and Me ...............................................................10
Boot-Up Function for Windows XP ................................................................................ 11
Recovery Function………………………………………………………………………13
Remove JF-Utility ……….………………………………………………………………15
Safely Remove Your JetFlash
Remove JetFlash in Windows 98SE...............................................................................15
Remove JetFlash in Windows Me, 2000, and XP ..........................................................15
Remove JetFlash in Mac OS ...........................................................................................15
Remove JetFlash in Linux...............................................................................................15
Troubleshooting……..……………………………………………………………………16
Specifications………………………………………………………………………………18
Ordering Information…..………………………………………………………………18
1
Introduction
Thank you very much for purchasing Transcend’s JetFlash™. This small device is designed to
expedite the exchange of huge amounts of data between any desktop or notebook computer with a
USB port. With a higher storage capacity and a much faster data transfer rates than other typical
portable storage media, JetFlash can easily replace floppy diskettes and hard disks. In addition, its
mobility, superior data retention ability, and impressive appearance will provide you with a
brand-new data storage experience.
Package Contents
The JetFlash package includes the following items:
• JetFlash
• Neck Strap
• Driver CD
• Quick Installation Guide
Features
• Fully compatible with USB 2.0
• Easy Plug and Play installation
• PC-Lock Function: Makes JetFlash a key to your computer
• Boot-Up Function: Makes JetFlash a bootable device
• Partition & Security Function: Create a private partition with password protection
• Recovery Function: Restore JetFlash to its default settings
• Driverless (Only Windows®98SE needs the enclosed driver)
• Powered via the USB port. No external power or battery needed
• LED indicates the usage status of the JetFlash
System Requirements
• Hardware: Desktop or notebook computer with USB port
• Operating System: Windows® 98SE, Windows® Me, Windows® 2000 or Windows® XP
Mac™ OS 9.0 or later, Linux™ Kernel 2.4 or later
2
Driver Installation
Driver Installation for Windows 98SE
1. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Select the Win98 Driver
button.
2. Follow the on-screen instructions to complete the driver installation.
3. Plug your JetFlash into an available USB port. A new Removable Disk drive with a newly
assigned drive letter will appear in the My Computer window.
Driver Installation for Windows Me, 2000, and XP
No driver is required. These Windows operating systems have built-in drivers to support JetFlash.
Simply plug JetFlash into an available USB port, and Windows will install the files needed to use
your device. A new Removable Disk drive with a newly assigned drive letter will appear in the My
Computer window.
Driver Installation for Mac OS 9.0 or Later
No driver is required. Just plug JetFlash into an available USB port and your computer will
automatically detect it. A new Disk icon will appear on the Desktop.
Driver Installation for Linux Kernel 2.4 or Later
No driver is required. Just plug JetFlash into the USB port and mount it.
Example: 1. First create a directory for JetFlash
mkdir /mnt/jetflash
2. Mount JetFlash
mount –a –t msdos /dev/sda1 /mnt/jetflash
3
Partition & Security Function
Partition Types
You can partition JetFlash into two partition types. The two types are:
Type 1: “Public Area Only”
This is the default partition type for JetFlash. It allows the entire volume of JetFlash memory to be
accessed by anyone. No secure data area is established.
Type 2: “Public and Security Area”
JetFlash is partitioned into a single Logical Unit Number (LUN) identified device, which contains a
Public Area and a Security Area. Secure data can be established in the Security Area, which is
protected by a password. Access to data in the Public Area is unrestricted.
1. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Plug your JetFlash into an
available USB port of your computer and select the JF-Utility button.
2. Select the Partition button in the JF-Utility window.
Public Area
Security Area
Log Out / Log In
Public Area
4
3. The following window will appear. Select Yes to continue or No to stop.
4. Select the partition type you need.
a. To partition your JetFlash to the default type, i.e.,“Public Area Only.” Choose the
Public Area Only, and then select OK.
b. To partition your JetFlash to“Public and Private Area”, select Public and Private
Area and enter the memory sizes to be apportioned to the Private Partition Area.
i. The minimum size apportioned to the Private Partition Area is 3MB, and the
maximum cannot exceed or equal the Total Storage Size.
ii. Key in a New Password.(Maximum size for a password is 8 characters.)
iii. Key in a Password Hint, as a reminder in case you forget your password.
iv. Select OK.
5
5. The following window will appear to warn you. Select OK to continue or Cancel to stop.
6. Once the partition is finished, the following window will appear. Select OK.
Access Data in the Security Area
1. Plug in your JetFlash and double-click the JF-Utility.EXE in JetFlash. The icon will
appear in the system tray and the following JF-Utility window will appear.
After the partition function is finished, the JF-Utility.EXE file will be copied to the JetFlash.
Please do not delete it. You can execute the JF-Utility function without the Driver CD by
running the JF-Utility.EXE on any computer.
2. Select the Login/out button in the JF-Utility window.
6
3. The following window will appear. Enter the correct password and select OK.
If a Password Hint was set up during the partition procedure, you can select the Hint
button to display your Password Hint to help you to remember the password.
4. The Removable Disk window will now appear and the Security Area is ready for use.
Log Out of the Security Area
1. Make sure that all files are closed and that no data is being transferred to or from your JetFlash.
2. Click the Login/out button in the JF-Utility window. Once you have successfully completed the
Log Out procedure for the Security Area of your JetFlash, only data in the Public Area will be
accessible.
Change Password
1. Select the Login/out button in the JF-Utility window.
7
2. The following window will appear. Select the Manage Password button.
3. Input the Old Password, and New Password and the Confirm New Password in each field.
(Maximum size for a password is 8 characters) You can also input a Password Hint to set up a
reminder for your new password. Select OK.
4. The following window appears. Select OK to close this window.
8
If You Forget the Password
If you forget your password, you can use the password hint to remember it. If you cannot recall the
password using the password hint, then all you can do is run the Partition function again to
repartition your JetFlash. Unfortunately, all your “Private area” data will be lost during this
procedure. You will have the chance to make a backup copy of your data in the “Public area” but all
data in the “Private area” is permanently lost.
PC-Lock Function
Once the PC-Lock function is enabled, you can use your JetFlash as a key to lock your computer,
protecting it from being used by other users.
The PC-Lock function is not supported in Mac or Linux Operating Systems.
To use the PC-Lock function, you must login into the Windows OS with Administrator
rights.
PC-Lock Function for Windows 98SE, Me, 2000, and XP
1. Select the PC-Lock button in the JF-Utility window.
2. The following window will appear.
3. In this window you can select the Protect Time you want, change the PC-Lock hint and the
Font.
Table des matières
Autres manuels Transcend Stockage
Transcend
Transcend 2.5" 40GB StoreJetTM TS40GSJ25 Manuel utilisateur
Transcend
Transcend SSD18M Manuel utilisateur
Transcend
Transcend ESD200 Manuel utilisateur
Transcend
Transcend StoreJet 2.5 SATA Series Manuel utilisateur
Transcend
Transcend CompactFlash CF 133X Manuel utilisateur
Transcend
Transcend USB JetFlash Manuel utilisateur
Transcend
Transcend TS1-GSDOM22V Manuel
Transcend
Transcend miniSDHC Card Series Manuel utilisateur
Transcend
Transcend TS2G-8GCF266 Manuel
Transcend
Transcend CompactFlash Ultra Speed 133x Instructions de montage
Transcend
Transcend Portable Hard Disk Enclosure TS0MHDENC Manuel utilisateur
Transcend
Transcend TS40GHDC2 Manuel utilisateur
Transcend
Transcend StoreJet 25M3 USB 3.0 750GB Manuel utilisateur
Transcend
Transcend Tsonic 630 1GB Manuel utilisateur
Transcend
Transcend StoreJet TS80GSJ25S Manuel utilisateur
Transcend
Transcend JetFlash 150 Series Manuel utilisateur
Transcend
Transcend TS4G-16GSDHC6- S5W Manuel utilisateur
Transcend
Transcend StoreJet 35U3 Manuel utilisateur
Transcend
Transcend ExpressCard SSD34E Manuel utilisateur
Transcend
Transcend StoreJet 25 mobile Manuel utilisateur
Manuels Stockage populaires d'autres marques
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur
Dell
Dell PowerVault MD3600f Series Manuel utilisateur