| 4
This TQC CureView Manual is created in multiple parts. This to give the
operator the best experience with the TQC CureView. It is
essential that the full manual is read and understood prior to
commencing operation of the TQC CureView.
1.1 Importance of operating manual
This manual is written in order to become familiar with all the functions and
possible applications of the instrument. It contains important instructions
about how to use the instrument safely and economically; according to
the purpose designated. Following these instructions is not only essential
to avoid risks. It also reduces repair costs and down-time and increases the
products reliability and service-life.
Anyone who works with the instrument shall follow the instructions in this
manual, particularly the safety related instructions. Additionally local rules
and regulations relating to environmental safety and accident prevention
should be observed. It is mandatory that users have read and understand
this manual prior to first operation of the TQC CureView.
1.2 User-responsibility
The user should
a) Only allow persons to work with the instrument who are
familiar with the general instructions on how to work safely and
to prevent accidents. The use of the instrument should have been
instructed duly. The safety chapter and the warnings in this
manual should have been read and understood; acknowledged
as evidenced by their signature.
b) Regularly check the safety-awareness of personnel at work.
c) Only allow user maintenance on the instrument such as lamp
replacement and thermal board replacement / exchange only to
be performed by TQC qualified or appointed personnel.
Maintenance by unqualified personnel can result in serious
damage to the instrument and will not be accepted as claimable
warranty.
1.3 Responsibility of personnel
Before commencing work anyone appointed to work with the instrument
should pay attention to the general regulations relating to working safety
and accident prevention. The safety chapter and the warnings in this manual
should have been read and understood; acknowledged as evidenced by
their signature, as can be placed in the Operator qualification list Annex A.
1.4 Dangers
This instrument has been designed and constructed in accordance with
state-of-the-art technology and the acknowledged safety regulations.
Nevertheless, working with the instrument may cause danger to the life and
health of the operator or to others, or damage to the instrument or other
property. Therefore the instrument should only be used for its designated
purpose, and in a perfect technical condition. Any defect that could
have a negative effect on safety should be repaired and recorded in the
maintenance list Annex B immediately.
1.5 Designated purpose
The TQC CureView Gradient oven is exclusively designed to perform
thermal testing to within its thermal design envelope of painted and
coated test panels as described within the specifications. Other applications
constitute improper use. TQC will not be held liable for damage resulting
from improper use.
Designated purpose also includes properly observing all instructions in the
operation manual, and adherence to inspection and maintenance
schedules. TQC is entitled to request these form when warranty claims are
made and during inspections to ensure safe operation and evaluate correct
usage.
1.6 Copyright
The copyright of this operating manual remains with TQC. This operating
manual is intended solely for the user and his personnel. Its instructions
and guidelines may not be duplicated, circulated or otherwise passed on to
others, neither fully, nor partly. Infringement of these restrictions may lead
to legal action may be taken if this restrictions are infringed upon.
1.7 Manufacturer’s/Supplier’s address
TQC – Molenbaan 19
2908 LL Capelle aan den IJssel
The Netherlands
T +31(0)10 7900 100
F +31 (0)10 7900 129
1 GENERAL
