TP-Link KLM100 Manuel utilisateur

KLM100 User Manual

1. Overview

The KLM100 Wi-Fi module provides a highly-integrated and flexible platform for

developing and evaluating products and applications based on the MT7682 SoC. The

KLM100 Wi-Fi module can be either used with development kit for software development

or incorporated into OEM products to enable rapid deployment of Wi-Fi connected systems.

The module includes the following components:

MT7682SN chip

A printed antenna

Shield

2. Interface and pinout

Interface:

Debug UART

PWM x4

Pinout:

3. Electric Feature

Power Supply

Type

Input

3.3V0.3A

Typical

300mW

Standby Mode

125mW

4. Mechanic Feature

Size: 24.00mm*19.00mm*2.60mm

5. Wireless Feature

Operating Frequency:2.4GHz:2412~2462MHz

Transfer Rate: 802.11b: 11/5.5/2/1 Mbps

802.11g: 54/48/36/24/18/9/6 Mbps

802.11n HT20: up to 65Mbps

Wireless Channel: ch1-ch11

Transmit Power:18dBm(max)

Antenna Type: Printed omnidirectional antenna

6. Physical and Environmental

Operating Temperature: -15℃～85℃

Storage Temperature: -15℃～85℃

Working Humidity: 10%～90% RH

7．Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This transmitter module must not be co-located or operating in conjunction with

any other antenna or transmitter.

The module should be installed in LED lamp.

This End equipment should be installed and operated with a minimum distance of 20 centimeters

between the radiator and your body.

IMPORTANT NOTE:

In the event that these conditions can not be met (for example certain laptop configurations or

co-location with another transmitter), then the FCC authorization is no longer considered valid

and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator

will be responsible for re-evaluating the end product (including the transmitter) and obtaining a

separate FCC authorization.

End Product Labeling

The final end product must be labeled in a visible area with the following:

“Contains FCC ID :TE7KLM100”.

Manual Information to the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to

install or remove this RF module in the user’s manual of the end product which integrates this

module.

Table des matières

Autres manuels TP-Link Unité de contrôle

TP-Link

TP-Link TL-SM321A Manuel utilisateur

TP-Link

TP-Link kasa smart KE100 V1.20 Manuel utilisateur

TP-Link

TP-Link TL-SM331T Manuel utilisateur

TP-Link

TP-Link TL-SM321A Manuel utilisateur

TP-Link

TP-Link TL-SM331T Manuel utilisateur

TP-Link

TP-Link TL-SM311LS Manuel utilisateur

TP-Link

TP-Link Kasa Smart KE100 KIT Manuel utilisateur

TP-Link

TP-Link kasa smart KE100 Manuel utilisateur

TP-Link

TP-Link TL-SM311LS Manuel utilisateur

TP-Link

TP-Link TL-SM311 Series Manuel utilisateur

TP-Link

TP-Link Omada SM311LS V5 Manuel utilisateur

TP-Link

TP-Link ecoNET300 Fiche technique

TP-Link

TP-Link TL-SM321A Manuel utilisateur

TP-Link

TP-Link TL-SM321A Manuel utilisateur

TP-Link

TP-Link TL-SM201 Series Manuel utilisateur

TP-Link

TP-Link DS-PMA-C+ V1 Manuel utilisateur

TP-Link

TP-Link kasa smart KE100 Manuel utilisateur

TP-Link

TP-Link kasa smart KE100 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur