5.The new oven in the first few days of use, please pay more
attention to observe, one is familiar with the performance of the
equipment to facilitate baking, and the other is to find problems
can be communicated in time. Because the violent vibration in
transportation may make the screw loose, and even affect the
normal work of the digital display instrument, we must pay
attention to check and deal with it in time when installing the
new machine.
6.This oven belongs to the appliance of "permanently connecting
to fixed wiring". According to the working environment,the user
can connect the self-provided power cord (YZM) to the terminal
of the electric oven of the oven according to the working
environment. For the convenience of users, the oven
has been provided with a power cord at random when it leaves
the factory. When using the power cord, please do not connect
the plug directly, be sure to connect the power cord to the circuit
breaker with leakage protector.
7.The equipotential connection terminal on the oven shell
is a special grounding terminal, which is not the protective
grounding terminal used to connect the universal wire, but
the terminal used to connect the external equipotential wire
in the apparatus should be allowed to connect the wire with
a nominal cross-sectional area of 2.5-6mm², and the well tool
should not be used to provide grounding continuity between
different parts of the instrument. These wires should not be
loosened without the help of tools.
8.Bake at least 50cm away from the wall.
9.Ovens can not be stored and used in the open air or in
particularly wet or water dripping places.
07 08
IV. Use and operation
1.Close the leakage circuit breaker, set the oven temperature,
turn on the power switch of each layer, and heat up the electric
heating pipe.
3.According to the different requirements of the baked food,
the temperature of "upper fire" and "lower fire" can be adju
sted respectively to make the food get the best fire color.
4.If the furnace fire is uneven in use, the method of
adjusting the cake plate (commonly known as the adjusting
plate) can be used to solve the problem.
5.Avoid opening and closing the furnace door as much as
possible when in use.
6.Do not install fans above or in front of the furnace door.
Note ∶ In order to avoid the danger caused by the wrong
reset of the thermal circuit breaker, the appliance can not
supply power through the external device, such as timer
or connected to the circuit that is timed and broken by the
general component.
V. Fault analysis and troubleshooting
Affected by power supply, operation, quality of accessories
, environment and other factors, the machine will occasionally
have local faults that need to be repaired and dealt with.
All kinds of possible faults are listed as follows:
Safety instructions Installation Use method fault handling
Safety instructions Installation Use method fault handling
2.The temperature of lower fire and upper fire can be
controlled separately: close the switch of lower fire, work
separately; close the switch of upper and lower fire, work
alone, close the switch of upper and lower fire and fire at
the same time, and work at the same time.
