• People to Notify - Select the user(s) to receive the
noticationandclickthearrowbuttontoaddthemtothe
recipientlist.Bydefault,emailnoticationsareactivated.
Clickingthenoticationdeliverymethodicontoggles
them on and off (green is on, grey is off).
• Sent From - Assign devices (sensors and gateways) that
willcausethenoticationtobesent.Whenanotication
is sent from the system, it will automatically include the
devicenameandthedatathatcausedthenoticationto
besent.Asinglenoticationcanbeassignedtomultiple
sensors or gateways.
• Devices to Notify - If you have a Monnit Control or
NotierA/Vonyournetwork,youwillseea“Devicesto
Notify”tab.Thisallowsthenoticationtointeractwith
these devices. Add a device and click the control icons
to toggle their settings.
Note: Control devices have two relays per device that are controlled
separately. You can turn a relay on, off or toggle the state. You can
also set a duration by clicking on the timer icon. This will perform the
selected toggle (on/off/toggle) for a set duration, then change back.
For more detailed instructions, documentation,
“how-to” guides and video demonstrations on using
Monnit wireless sensors, wireless gateways and
iMonnit software, visit our support page at
http://www.monnit.com/support/.
MQS-022-2B (09/15)
• Insert batteries into the wireless sensors.
• Check that the sensors change to active as batteries are
inserted. (You may need to click the refresh button at
the top, right side of overview.)
• The iMonnit online software is now collecting your
sensor data.
Note: Any change made to a sensor’s settings will be downloaded to
the sensor on the next sensor heartbeat (check-in). Once a change
has been made and “Saved,” you will not be able to edit that sensor’s
congurations again until the sensor has downloaded the new setting.
If you want to force a sensor to download new settings, you can power
cycle the sensor by removing the battery, waiting 30 seconds, then
reinsert the battery.
Setting Up Sensor Notications
• Noticationscanbecreated,deletedoreditedforany
sensororgroupofsensorsbyclickingon“Notications”
in the main menu.
Toggle On/Off Click to Open Detail View Send Test Edit Delete
• Whencreatinganotication,youwillneedtoselectthe
typeofnoticationtocreate.
• SensorReadingNotication - Alert based on sensor reading
or sensing activity.
• BatteryNotication - Alert based on battery power remaining.
• InactivityNotication - Alert when a sensor has not checked in.
• AdvancedNotications - Alerts based on advanced rules, such
as comparing past data points with current ones.
• ExistingNotications-Usenoticationsthathavealready
been created on your account with the selected sensor.
• NoticationSettings-Setnoticationparameterssuch
as name, message and sensor conditions that will cause
thenoticationtobesent.
Monnit, Monnit Logo, MonnitLink and iMonnit are trademarks of Monnit, Corp.
© 2009-2015 Monnit Corp. All Rights Reserved.
Monnit Corporation
4403 South 500 West
Murray, UT 84123
801-561-5555
www.monnit.com
The system is now collecting your sensor data.
Please visit www.topjetsales.com/alerts.turtorials
for help setting up your notifications.
If you have questions please feel free to contact us.
Once you are done you can view your sensor's data
on www.alerts.topjetsales.com for evaluation on your
cell phone, Ipad, computer, etc.
Inside the Box:
>Temp Alert Sensor(s)
>Ethernet Gateway
>Power Supply
>Antenna
>6 ft Ethernet Cable
>Mounting Hardware
>Capsule w/substance (air temp sensors w/probe only)
1-800-913-0192
Please visit
www.topjetsales.com/temperature-alert/tutorials
for help setting up your notifications.
