Topcon RL-VH3A Manuel utilisateur
2002
RL-VH3 Series
(A/B/G)
INTERIOR
LASERS
All of the features you would expect ... and more!
Introducing the next generation interior lasers from Topcon, the RL-VH3 series.
This is the second generation to feature Topcon’s exclusive ultra-visible Green Beam®
(RL-VH3G). It quadruples beam brightness so you’ll never lose the beam, even in
direct sunlight. The RL-VH3 series is equipped with many "Smart" features, improved
battery life, excellent spot quality, and a full function optional remote, the RL-VH3
series is the only choice. It’s the one-man layout tool you’ll have to see to believe!
Level Floors to Ceilings and Everything in Between
For horizontal levelling and alignment, Topcon’s unique scanning technology increases
levelling production on ceiling grids, soffit elevations, and raised access flooring.
The RL-VH3 greatly simplifies any job requiring a horizontal reference level or slope.
Finish Walls Faster and Better
Set-up any RL-VH3 on its side (all have a built-in floor mount) to manage vertical layout and
alignment. The unique automatic plumb beam instantly establishes initial layout points and
the laser’s rotation transfers these points to any surface on the job to position studs, drop
walls, or bulkheads. With the 90° beam emitted from the top and bottom of the RL-VH3 you
can speed the pace of any 90° layout or alignment job, quickly establishing corners and Tee’s.
Simply smarter...
SmartScan™
A rotating laser beam is
great, but when you need
a concentrated laser line,
Topcon’s SmartScan lets
you draw a line of focused
laser light on any surface,
to any length you need.
And it stays there as long
as you need. All done
automatically from the
target.
SmartLine™
Aligning the beam for
vertical operation is,
you guessed it, automatic.
Simply place the target at
your farthest control point
and let the laser do the rest.
The beam automatically
centers on the target. You
get one person alignment
at record breaking speed.
SmartSlope
Raking-in a beam to match
a slope has always been
hard, usually requiring two
people and a lot of guess
work. Not anymore. Just like
SmartLine, put the target
at the right elevation and
the beam automatically
drives to it and stays there.
And it works for either
compound or single slopes.
One person. Accurate. Easy.
SmartPlumb
Vertical setups are fast and
accurate because the beam
automatically gives you a
plumb point directly below
the aperture. Just press
the SmartPlumb button
and the beam plumbs
down. You get the perfect
setup point, plus a scan
line for roughing in. It’s
great for tripod setups.
Only Topcon gives you these "world’s first" features to make your work easier and more productive than ever.
It’s brighter. Up to four times brighter
than conventional beams. You can see
the green beam anywhere under any
conditions. Set the laser up for best
coverage every time, no need to worry
about windows or other lighted areas.
You’re using the beam instead of losing
it, so the job gets done faster.
Isn’t that why you buy a laser in the
first place?
Whether green or red, the more tightly focused the beam, the brighter.
The RL-VH3A & G are the world’s only lasers to focus automatically on the target, no matter where you are on the job.
Because conventional beams focus at just one distance, the beam width varies from one work area to the next.
With SmartFocus, you can count on the tightest and brightest possible line of laser light where you need, automatically.
Simultaneous 90° beam
for plumb and layout
Rugged, sealed design
protects the unit from
dust and moisture
Simple push button slope control
to keep the job moving
Variable rotation speeds
from 0 to 300
Horizontal and vertical
SmartPlumb control
SmartPlumb™ Automatic
Plummet Beam
Floor Mount provides fast setup over a
point and includes tripod mount
Electronic self-levelling mechanism
provides fast setups and the world’s most
reliable and stable leveling
Compact in design with integrated
handle and weighing only 6.4 lbs (2.9kg),
the RL-VH3G is truly portable and
easy to set-up
The optional RC-30 radio remote handles
all of the functions of the RL-VH3 series
lasers. It features an operational range
of ±100m, two-way laser communication,
uses selectable transmission
frequencies, and the ability
to pinpoint focus the beam
on any surface.
The RL-VH3 is the completely
"hands-free" laser, but if you
need a remote the RC-30 is
your answer.
Why Green?
RC-30 Optional Remote
Focusing on Visibility
Topcon’s
RL-VH3G
vs.
Their
Red Beam
@
20’ / 6m
Topcon’s
RL-VH3G
vs.
Their
Red Beam
@
70’ / 20m
Topcon’s
RL-VH3G
vs.
Their
Red Beam
@
150 / 50m
SPECIFICATIONS
Designs and specifications here in are subject to change without prior notice.
In order to obtain the best results with this instrument,
please be sure to review all user instructions prior to operation.
RL-VH3G RL-VH3A RL-VH3B
Beam Type 532nm Green Laser 635nm Red Laser 635nm Red Laser
SmartFocus™ Yes Yes No
SmartScan™ Yes Yes Yes
SmartLine™ Yes Yes Yes
SmartPlumb™ Yes Yes Yes
Vertical Beam Yes (up and down) Yes (up and down) Yes (up only)
Vertical Accuracy ±15" ±15" ±15"
Horizontal Accuracy ±10" ±10" ±10"
Rotating Speed (RPM) 30 to 300 Selectable 30 to 600 Selectable 30 to 600 Selectable
Self-Levelling Range ±5° ±5° ±5°
Operating Range 100m (330’) Diameter 100m (330’) Diameter 100m (330’) Diameter
Power Sources
Batteries Rechargeable/Alkaline Rechargeable/Alkaline Rechargeable/Alkaline
External AC/12vDC AC/12vDC AC/12vDC
Operating Temperature -4 to 122°F (-20° to 50°C) -4 to 122°F (-20° to 50°C) -4 to 122°F (-20° to 50°C)
Laser Classification Less than 5mw/Class IIIa Less than 5mw/Class IIIa Less than 5mw/Class IIIa
Water/Dust Proof Yes Yes Yes
Field Calibration Yes Yes Yes
Dimensions 214 x 123 x 259.5 mm 214 x 123 x 259.5 mm 193.5 x 123 x 259.5 mm
(8.4" x 6.6" x 10.2") (8.4" x 6.6" x 10.2") (7.6" x 6.6" x 10.2")
Standard Warranty 2 Years 2 Years 2 Years
RC-30 Remote Optional Optional Optional
Wide Array of Power Choices
• Rechargeable Ni-H battery pack
• 4 Alkaline Batteries
• 230 AC/12vDC Operation
• 40 hr alk / 30 hr Ni-H operation
• Runcharge during AC or 12vDC
operation
RL-VH3 Series Standard Package
• Rechargeable Ni-H Battery Pack
• 2 Magnetic Ceiling Targets
• Floor Mount
• Hard Shell Carry Case
• SmartLine Target
Optional
• Adjustable wallmount (A&G)
• Standard wallmount (B model)
Topcon has the industry’s most complete
line of interior lasers including the NEW
low-cost interior laser with high-end
features, the RL-VH3C. Each has unique
technologies to make your jobs easier,
faster and more profitable.
Great mix of price and perfor-
mance RL-VH3A and RL-VH3B
Priced for value, the RL VH3A is a red
beam laser that offers all of Topcon’s
"smart" interior laser technologies like
SmartScan, SmartFocus, SmartLine and
SmartSlope. The RL-VH3B is the choice
among contractors looking for a high
performance laser at a great price.
Featuring Topcon’s high precision
levelling system, unique scanning
technology, selectable rotating speeds,
and slope match.
Certificatie No. 03682548
TOPCON EUROPE B.V.
Capelle a/d IJssel, The Netherlands
Your Topcon Partner
Item number: 5410201
Printed: 08-2002
TOPCON EUROPE B.V.
Essebaan 11
2908 LJ Capelle a/d IJssel
The Netherlands
Phone: 31-(0)10 - 458 50 77
Fax: 31-(0)10 - 458 50 45
E-mail: [email protected]
http: //www.topconeurope.com
Ce manuel convient aux modèles suivants
3
Autres manuels Topcon Instrument de mesure
Topcon
Topcon BM-7A Manuel utilisateur
Topcon
Topcon DS-101AC Manuel utilisateur
Topcon
Topcon GPT-8001A Manuel utilisateur
Topcon
Topcon IS01 Manuel utilisateur
Topcon
Topcon GPT-3000 Series Manuel utilisateur
Topcon
Topcon GTS-710 Series Manuel utilisateur
Topcon
Topcon BM-9A Manuel utilisateur
Topcon
Topcon GPT-3002W Series Manuel utilisateur
Topcon
Topcon Sokkia FX Series Manuel utilisateur
Topcon
Topcon GPT-7000i Series Manuel utilisateur
Topcon
Topcon CT-800 Manuel utilisateur
Topcon
Topcon CL-300 Mode d'emploi
Topcon
Topcon GTS-821A, GTS-822A, GTS-823A, GTS-825A Manuel utilisateur
Topcon
Topcon RL-SV2S Manuel utilisateur
Topcon
Topcon ES-62 Manuel utilisateur
Topcon
Topcon HiPer Plus Manuel utilisateur
Topcon
Topcon PS Series Manuel utilisateur
Topcon
Topcon DS Series Manuel utilisateur
Topcon
Topcon SR-LEDW Manuel utilisateur
Topcon
Topcon DIGI-STAR TMR3610 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur