Topcon TP-L5GV Manuel utilisateur

INSTRUCTION MANUAL

PIPE LASER

32956 90092

TP-L5 SERIES

TP-L5GV

TP-L5G

TP-L5BG

TP-L5AV

TP-L5A

TP-L5B

For more information contact Synergy Positioning Systems or

visit the Synergy Positioning Systems website at www.synergypositioning.co.nz

All branches: Phone 0800 867 266 Email: [email protected]

HOW TO READ THIS MANUAL

Thank you for selecting the TOPCON instrument.

• Please read this instruction manual carefully before using this instrument.

• Verify that all equipment is included.

“ STANDARD SYSTEM COMPONENTS” (p. iii)

• The specifications and general appearance of the instrument are subject to change without

prior notice and without obligation by Topcon Corporation and may differ from those appearing

in this manual.

• Some of the diagrams shown in this manual may be simplified for easier understanding.

Symbols

The following conventions are used in this manual.

:Indicates precautions and important items which should be read before

operations.

:Indicates the chapter title to refer to for additional information.

:Indicates supplementary explanation.

HOW TO READ THIS MANUAL

Notes regarding manual style

• Except where stated, "TP-L5" means TP-L5GV/G/BG/AV/A/B in this manual.

• The specifications by the model are as follows.

• All company and product names featured in this manual are trademarks or registered

trademarks of each respective organization.

Model Laser Upper/Lower

Laser

Centerline

LED

Auto alignment

" Automatic alignment with the target

(TP-L5GV/G/AV/A only)" (p. 39)

TP-L5GV

Green

---

TP-L5G ---

TP-L5BG --- ---

TP-L5AV

Red

---

TP-L5A ---

TP-L5B --- ---

iii

STANDARD SYSTEM COMPONENTS

• Please make sure that all of above items are in the box when you unpack.

*1) Batteries included in the package are to confirm the initial operation.

Please replace the batteries provided with new batteries (alkaline) as soon as possible.

1) Pipe Laser TP-L5..................................... 1pc.

2) Remote controller RC-200....................... 1pc.

3) Battery BT-53Q (rechargeable battery) ... 1pc.

4) AC/DC Converter AD-13 ......................... 1pc.

5) Battery adapter BA-2 ............................... 1pc.

6) Self-centering Feet

ø150mm .................................................. 4pcs.

ø200mm .................................................. 4pcs.

ø250mm .................................................. 4pcs.

ø300mm .................................................. 4pcs.

7) Single point foot....................................... 1pc.

8) Target....................................................... 1set

9) AAA Manganese battery*1) ...................... 4pcs.

10) Carrying case .......................................... 1pc.

11) Instruction manual ................................... 1vol.

1. PRECAUTIONS FOR SAFE OPERATION ............................................................................ 1

2. PRECAUTIONS ..................................................................................................................... 7

3. LASER SAFETY INFORMATION ........................................................................................ 13

4. PRODUCT OUTLINE ........................................................................................................... 16

4.1 Parts and Functions of the Instrument.......................................................................... 16

Control panel............................................................................................................. 18

Key Operation (When the instrument is locked) ....................................................... 21

Indicators .................................................................................................................. 22

5. USING THE BATTERY ........................................................................................................ 25

5.1 Battery BT-53Q (Rechargeable battery) ....................................................................... 25

Removing the battery................................................................................................ 25

Battery charging........................................................................................................ 26

5.2 Battery Holder DB-53 (Dry battery holder) *Optional accessory................................... 29

Removing the battery................................................................................................ 29

Replacing the dry cell batteries................................................................................. 29

5.3 PC-17 (Power cable for 12vDC) *Optional accessory .................................................. 30

6. BASIC OPERATION ............................................................................................................ 31

6.1 Setting up the Instrument.............................................................................................. 31

6.2 Grade setting procedure ............................................................................................... 32

Direct entry of grade value........................................................................................ 32

Set grade value by moving laser............................................................................... 35

CONTENTS

6.3 Setting Laser Line......................................................................................................... 36

Automatic Centering.................................................................................................. 38

Automatic alignment with the target (TP-L5GV/G/AV/A only) ................................... 39

6.4 Changing the laser beam mode.................................................................................... 42

7. STANDARD ACCESSORIES............................................................................................... 43

7.1 Self-centering Feet........................................................................................................ 43

7.2 Single Point Foot........................................................................................................... 44

7.3 Remote Controller (RC-200) ......................................................................................... 45

Replacing battery for Remote Control, RC-200 ........................................................ 49

7.4 Target ........................................................................................................................... 50

8. CHANGING OPERATING PARAMETERS .......................................................................... 51

8.1 Operating Parameters................................................................................................... 51

8.2 How To Change Operating Parameters........................................................................ 53

8.3 How to Input (Change) Security Code .......................................................................... 55

8.4 How to change Company Name ................................................................................... 60

9. CHECKS AND ADJUSTMENTS .......................................................................................... 66

9.1 Procedure To Check and Adjust Laser Calibration....................................................... 66

Checking Calibration ................................................................................................. 66

Adjusting Calibration ................................................................................................. 67

9.2 Checking of Upper/Lower Laser (TP-L5GV/AV only).................................................... 70

CONTENTS

10. ERROR DISPLAYS.............................................................................................................. 71

11. TROUBLESHOOTING ......................................................................................................... 72

12. OPTIONAL ACCESSORIES ................................................................................................ 77

13. SPECIFICATIONS ...............................................................................................................78

14. REGULATIONS.................................................................................................................... 81

CONTENTS

1. PRECAUTIONS FOR SAFE OPERATION

For the safe use of the product and prevention of injury to operators and other persons as well

as prevention of property damage, items which should be observed are indicated by an

exclamation point within a triangle used with WARNING and CAUTION statements in this

instruction manual.

The definitions of the indications are listed below. Be sure you understand them before reading

the manual’s main text.

Definition of Indication

WARNING Ignoring this indication and making an operation error could possibly

result in death or serious injury to the operator.

CAUTION Ignoring this indication and making an operation error could possibly

result in personal injury or property damage.

This symbol indicates items for which caution (hazard warnings inclusive) is urged.

Specific details are printed in or near the symbol.

This symbol indicates items which are prohibited. Specific details are printed in or

near the symbol.

This symbol indicates items which must always be performed. Specific details are

printed in or near the symbol.

1. PRECAUTIONS FOR SAFE OPERATION

General

Warning

Do not use the unit in areas exposed to high amounts of dust or ash, in areas where

there is inadequate ventilation, or near combustible materials. An explosion could

occur.

Do not perform disassembly or rebuilding. Fire, electric shock, burns or hazardous

radiation exposure could result.

Do not use under thunderous weather conditions. This unit is conductive and if

struck by lightning, death or injury could result.

Handle with care when using near high voltage cables or transformers. This unit is

conductive and contact could result in electric shock.

When securing the instrument in the carrying case make sure that all catches,

including the side catches, are closed. Failure to do so could result in the

instrument falling out while being carried, causing injury.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Topcon Instrument de mesure

Topcon

Topcon UVR-300 Manuel utilisateur

Topcon

Topcon ES-52 Manuel utilisateur

Topcon

Topcon ES-101 Manuel utilisateur

Topcon

Topcon IM-1000 Manuel utilisateur

Topcon

Topcon GM-100 Series Manuel utilisateur

Topcon

Topcon RL-H3C Manuel utilisateur

Topcon

Topcon IS Series Manuel utilisateur

Topcon

Topcon GT560 AUTOLOG Manuel utilisateur

Topcon

Topcon RL-H4C Manuel utilisateur

Topcon

Topcon CL-300 Mode d'emploi

Topcon

Topcon RL-VH4DR/G2 Manuel utilisateur

Topcon

Topcon Synergy GM-50 series Manuel utilisateur

Topcon

Topcon RL-H3C Manuel utilisateur

Topcon

Topcon BM-9A Manuel utilisateur

Topcon

Topcon GTS-230W Series Manuel utilisateur

Topcon

Topcon RL-SV2S Manuel utilisateur

Topcon

Topcon GM-100 Series Guide d'installation

Topcon

Topcon GM-55 Manuel utilisateur

Topcon

Topcon GTS-750 Series Manuel utilisateur

Topcon

Topcon OS Series Manuel utilisateur

Topcon

Topcon FC-2600 Manuel utilisateur

Topcon

Topcon RD-80SA Manuel utilisateur

Topcon

Topcon RL-VH3C Manuel utilisateur

Topcon

Topcon Sokkia FX Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur