3、 The operator shall be professional trained to ensure safe working and avoid harm or
damage caused by false operation.
4、 The operation instruction shall be strictly followed to installate and operate the machine
tool. There should be enough space for operate and the space shall be cleaned without
obstacles to operator’s ensure safe operation and daily maintenance.
5、。 The operator should work as trained and required as the operation instruction, keeping
regular maintenance and repare to ensure safe operation conditions.
6、 Safety protection equipments must be put on the operator while working with machine
tools and should be regularly checked. It is forbidden to take the equipments off the
machine tool and prevention fence should be set if necessary.
7、All protection covers should be shut before machine tool operation while the adjustable
band saw protection covers should be near the working parts. During working, no
protective cover could be opened.
8、When removing and changing the saw blade, the machine tool should be confirmed to
have stopped working. Only then could the saw wheel protective cover be opened and the
support posted be checked to be firmly fastened. Protective gloves must be put on to avoid
puncture or hurt while changing the saw blade.
9、Highly attention that no part of the body should touch the working saw blade band or
get into the working area during the operation. It is also forbidden to take the jammed or
broken parts while the machine tool is working.
10、Gloves and loose clothes are not allowed during machine tool operation and
maintenance.
11、The parts should be checked to be firmly clamped before and during the whole sawing
working. The claming equipment should not be released until the saw bands stop working.
12、When the machine tool is working, the long and heavy parts should be firmly supported
during the cutting-in and cutting-out, preventing the fall of the cut parts and the turn-over
of the machine tool after the cutting task. Feeder and picking rack should be applied when
long materials are to be cut.
13、The power supply shall be completely cut off before the adjustment, maintenance,
repairing and cleaning of the machine tool, avoiding electric accidents.
14、The machine tool should be shut before transmission.
15、To adjust the guide arms spread, the machine tool must be shut. Then the fastening
hand wheel should be firmly fixed after the adjustment.
