1、Safety Guidance
3
⚫Do not touch the blade、workpiece and chips when the machine is running.
⚫Do not check and/or repair the machine when the machine is running.
⚫Must fix the workpiece on the work platform tightly.
⚫Do not wear gloves when operating.
⚫Do not work in excess of the machine cutting conditions(Max.Torque.Max.Cutting
Resisance.Large Power).
⚫Prohibition of non-operator in the workplace.
⚫Do not move,install and measuring the workpiece if it is not in security state when the
machine stopped.
⚫Do not change the speed when the machine is running.
⚫Must to turn off the power switch when a sudden power failure,otherwise there are
dangers
when the machine running suddenly in which case the power supply suddenly again.
1.5 Maintenance
⚫Prohibition of disassembling and/or assembling on the impact of machine performance and
safety.
⚫Non-professional can not carry out related maintenance.
⚫Maintenance should be carried out under power off,otherwise occur dangers.
⚫Please read the chapter of maintenance in the Instruction Manual.
