7
WARNING
●Never connect pneumatic wrench to electric power
source.
○Pneumatic wrench is not an insulated tool.
Failure to follow this instruction may result in serious
accident and injury.
●Do not disassemble or modify pneumatic wrench.
Disassembly or modification made by unauthorized personnel
may result in malfunction or personal injury.
Disassembly & Re-assembly work is permitted for following
expendables:
Inner Socket, Outer Socket, Set Screws, Inner Socket
Spring, Ejector Pin and Ejector Spring.
●Store pneumatic wrench in the metal case and keep
it in the designated place when not in use.
○Store the wrench in lockable dry location to keep any
unauthorized personnel away.
Failure to follow this instruction may result in
malfunction or accident.
●Immediately stop using and disconnect air hose
from pneumatic wrench when unusual sound,
vibration or smell is detected.
○Contact your distributor immediately.
Failure to follow this instruction may result in serious
injury.
8
WARNING
●Contact your distributor for repair service.
Repair work should only be done by a qualified serviceman.
Repair work done by an inexperienced person may cause
accident, injury or malfunction.
●Check the following items before operation.
○Check for any deformation, crack or damage on wrench
body, air hose, air inlet fitting and etc.
Do not use wrench if any problem is found on items listed
above.
○Make sure that socket assembly is correctly installed
on the wrench.
○Make sure that set screws are securely fastened.
Loose installation may result in accident and personal
injury.
●Immediately check the wrench when it is dropped
down or banged.
○Check for deformation, crack, damage and other
abnormality. Stop using the wrench if any abnormality
is found.
Continued use of faulty wrench may result in accident and
personal injury.
