Tippmann A-5TM E-GRIPTMKIT Manuel utilisateur

TIPPMANN®

2955 Adams Center Road, Fort Wayne, IN 46803 USA

P) 260-749-6022 • F) 260-749-6619

www.tippmann.com

TP04115

Date: 09/09

SL-68 II

PAINTBALL MARKER

LANCEUR DE PAINT-BALL

MACADOR PAINTBALL

Owner’s Manual

Manuel d’utilisation

Manual del Usuario

ADVERTENCIA

ESTO NO ES UN JUGUETE. UN USO INAPROPIADO

PUEDE CAUSAR SERIAS HERIDAS O LA MUERTE.

OJOS, CARA Y OIDOS DEBEN SER PROTEGIDOS

TODO EL TIEMPO, CON LA PROTECCIÓN DISEÑADA

PARA PAINTBALL TANTO POR JUGA-DORES COMO

POR CUALQUIER PERSONA QUE ESTE EN EL RADIO

DE ALCANCE. RECOMENDAMOS AL MENOS 18 AÑOS

PARA LA COMPRA Y USO. LAS PERSONAS MENORES

DE 18 AÑOS DEBEN USAR ESTE PRODUCTO BAJO LA

SUPERVISIÓN DE UN ADULTO. LEA EL MANUAL DEL

USARIO ANTES DE USAR ESTE PRODUCTO.

WARNING

THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS

INJURY OR DEATH. EYE, FACE, AND EAR PROTECTION

DESIGNED FOR PAINTBALL MUST BE WORN BY

THE USER AND ANY PERSON WITHIN RANGE. WE

RECOMMEND YOU BE AT LEAST 18 YEARS OLD TO

PURCHASE. PERSONS UNDER 18 MUST HAVE ADULT

SUPERVISION WHEN USING THIS PRODUCT. READ THE

OWNER’S MANUAL BEFORE USING THIS PRODUCT.

AVERTISSEMENT

CECI N’EST PAS UN JOUET. TOUT USAGE

INAPPROPRIE PEUT PROVOQUER DES BLESSURES

GRAVES OU MORTELLES. LE PORT DE LA

PROTECTION POUR LES YEUX, LE VISAGE ET LES

OREILLES CONCUE POUR LE PAINT-BALL EST

OBLIGATOIRE POUR L’UTILISATEUR AINSI QUE

POUR TOUTE PERSONNE A PORTEE DE TIR. POUR

L’ACHAT, NOUS RECOMMANDONS L’AGE DE 18 ANS.

LES PERSONNES DE MOINS DE 18 ANS DOIVENT

ETRE SOUS LA SURVEILLANCE D’UN ADULTE

LORSQU’ELLES UTILISENT CE PRODUIT. LISEZ LE

MANUEL AVANT D’UTILISER CE PRODUIT.

WARNING

SAFETY IS YOUR RESPONSIBILITY

READ AND FAMILIARIZE YOURSELF AND ANY OTHER USER

OF THIS MARKER WITH THE

SAFETY INSTRUCTIONS

IN THIS MANUAL. FOLLOW THESE INSTRUCTIONS WHEN

USING, WORKING ON, TRANSPORTING, OR

STORING THIS

MARKER.

ALWAYS KEEP THE TRIGGER SAFETY IN SAFE

MODE UNLESS FIRING AS DETAILED IN

INSTRUCTIONS ON PAGE 6.

ALWAYS KEEP THE BARREL SLEEVE

INSTALLED WHEN NOT IN A SHOOTING

SITUATION, SEE INSTRUCTIONS ON PAGE 4.

Push Safety

AVERTISSEMENT

LA SECURITE EST VOTRE RESPONSABILITE

LISEZ ET FAMILIARISEZ-VOUS AINSI QUE TOUT AUTRE

UTILISATEUR DE CE LANCEUR AVEC LES INSTRUCTIONS

DE SECURITE CONTENUES DANS CE MANUEL. SUIVEZ CES

INSTRUCTIONS LORSQUE VOUS UTILISEZ, TRAVAILLEZ

SUR, TRANSPORTEZ OU ENTREPOSEZ CE LANCEUR.

SI VOUS NE TIREZ PAS, MAINTENEZ TOUJOURS LA

SECURITE DE LA DETENTE EN MODE SECURITE

COMME INDIQUE DANS LES INSTRUCTIONS EN

PAGE 6.

GARDEZ TOUJOURS LA DOUILLE DU CANON

INSTALLEE LORSQUE VOUS N’ETES PAS EN

SITUATION DE TIR, VOIR INSTRUCTIONS EN PAGE 4.

ADVERTENCIA

LA SEGURIDAD ES SU RESPONSABILIDAD

LEA Y FAMILIARICESE USTED Y CUALQUIER OTRO

USUARIO DE ESTE MARCADOR CON LAS INSTRUCCIONES

DE SEGURIDAD DE ESTE MANUAL. SIGA ESTAS

INSTRUCCIONES CUANDO LO USE,TRABAJE EN EL,

TRANSPORTE, O ALMACENE.

MANTENGA SIEMPRE EL GATILLO EN POSICION DE

SEGURO A SIN NO VA HACER UN DISPARO COMO

LO EXPLICA LAS INSTRUCCIONES EN LA PAGINA

SIEMPRE MANTENGA LA FUNDA DE

SEGURIDAD INSTALADA CUANDO NO VA

HACER DISPAROS, VER INSTRUCCIONES EN

LA PAGINA 4.

Push Safety

WARNING

ALWAYS KEEP THE BARREL BLOCKING DEVICE INSTALLED

EXCEPT WHEN YOUR MARKER IS IN USE. ALWAYS MAKE

SURE THAT THE TRIGGER SAFETY IS IN THE SAFE MODE (SEE

INSTRUCTIONS ON PAGE 6) AND THE BARREL BLOCKING

DEVICE IS PROPERLY INSTALLED ON YOUR MARKER

ACCORDING TO THE INSTRUCTIONS TO PREVENT DAMAGE

TO PROPERTY, SERIOUS INJURY, OR DEATH.

Barrel Sleeve Installation Instructions

1. Insert the barrel sleeve onto the barrel and loop the cord over the top of the receiver

and position at the back of the grip as shown.

2. Adjust the cord length retainer up to the back of the grip by pulling the cord through it

until the retainer is snug against the back of the grip.

Keeping the cord as tight as possible, leave just enough

cord elasticity to pull the cord/retainer up over the top of

the marker to remove the barrel sleeve for ring.

3. After the cord length is properly adjusted, lock the cord length by

tying a knot in the cord against the back of the retainer as shown.

4. Before and after playing, inspect the barrel sleeve and replace if

the sleeve or cord is damaged, or there is a loss of cord elasticity.

5. Clean the barrel sleeve with plain, warm water and store out of sunlight in a dry area

when not in use.

Barrel Sleeve

Cord Length

Retainer

WARNING

THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR

DEATH. EYE, FACE, AND EAR PROTECTION DESIGNED FOR

PAINTBALL MUST BE WORN BY THE USER AND ANY PERSON

WITHIN RANGE. WE RECOMMEND YOU BE AT LEAST 18

YEARS OLD TO PURCHASE. PERSONS UNDER 18 MUST HAVE

ADULT SUPERVISION WHEN USING THIS PRODUCT. READ THE

OWNER’S MANUAL BEFORE USING THIS PRODUCT.

TIPPMANN®

2955 Adams Center Road, Fort Wayne, IN 46803 USA

P) 260-749-6022 • F) 260-749-6619

www.tippmann.com

CONGRATULATIONS on your purchase of your Tippmann® paintball marker. We believe our

SL-68 II™ marker to be the most accurate and durable paintball marker available, and it is

proudly manufactured in the USA. All Tippmann® SL-68 II markers will provide many years of

dependable service if cared for properly.

Please take time to read this manual thoroughly and become familiar with your Tippmann®

SL-68 II™ marker’s parts, operation, and safety precautions before you attempt to load or

re this marker. If you have a missing or broken part, or need assistance, please contact

Tippmann Consumer Relations at 1-800-533-4831 for fast, friendly service.

Table of Contents

Barrel Sleeve Installation Instructions ....................................................................................4

Warning / Liability Statement ..................................................................................................6

Safety Is Your Responsibility! ................................................................................................6

Familiarize Yourself with Safety... ...................................................................................6

Getting Started .......................................................................................................................8

Velocity Adjustment ................................................................................................................8

Unloading Your Marker ..........................................................................................................9

Air Supply Cylinder Warnings .................................................................................................9

Air Supply Cylinder Safety Tips ....................................................................................10

Air Supply Cylinder Removal ........................................................................................11

Repairing Air Supply Cylinder Leaks ...........................................................................11

Cleaning and Maintenance ...................................................................................................12

Storage .........................................................................................................................12

Field Barrel Cleaning ....................................................................................................12

Field Disassembly .......................................................................................................13

Re-assembly .................................................................................................................13

General Troubleshooting .............................................................................................16

Valve Troubleshooting .................................................................................................16

Warranty and Repair Information .........................................................................................18

Specications ......................................................................................................................19

SL-68 II Diagram and Parts List ...........................................................................................20

Warning / Liability Statement

This marker is classied as a dangerous weapon and is surrendered by Tippmann Sports,

LLC with the understanding that the purchaser assumes all liability resulting from unsafe

handling or any action that constitutes a violation of any applicable laws or regulations.

Tippmann Sports, LLC shall not be liable for personal injury, loss of property or life resulting

from the use of this weapon under any circumstances, including intentional, reckless,

negligent or accidental discharges.

All information contained in this manual is subject to change without notice. Tippmann

Sports, LLC reserves the right to make changes and improvements to products without

incurring any obligation to incorporate such improvements into products previously sold.

If you as a user do not accept liability, Tippmann Sports, LLC requests you do not use a

Tippmann Sports, LLC marker. By using this paintball marker you release Tippmann Sports,

LLC of any and all liability associated with its use.

Safety Is Your Responsibility!

Familiarize Yourself with Safety...

The ownership of this marker places upon you the total responsibility of its safe and lawful

use. You must observe the same safety precautions as you would any rearm to assure

the safety of not only yourself but everyone around you. Outlined here are some general

precautions to be aware of. The user should at all times use caution and common sense

when using this marker and always remember that the game of Paintball can only survive

and grow if it remains SAFE!

• Do not load or re this marker until you have completely read this manual and are

familiar with its safety features, mechanical operation and handling characteristics.

• Handle this and any marker as if it were loaded at all times.

• Keep your nger off the trigger until ready to shoot.

• Do not look down the barrel of a paintball marker. Accidental discharge into the

eyes may cause permanent injury or death.

• Keep the trigger safety in safe mode until ready to shoot (see Warning above).

WARNING

• EXCEPT WHEN YOUR MARKER IS IN

USE, ALWAYS MAKE SURE THAT THE

TRIGGER SAFETY IS IN SAFE MODE,

WHICH DISABLES THE TRIGGER, AND

THE BARREL SLEEVE IS INSTALLED

(SEE PAGE 4).

• TO TURN ON THE TRIGGER SAFETY

(SAFE MODE): PUSH THE SAFETY IN

AS SHOWN IN FIGURE 1.

• TO TURN TRIGGER SAFETY OFF (FIRE MODE): PUSH SAME BUTTON

ON THE OPPOSITE SIDE OF RECEIVER.

Figure 1: Trigger Safety Location

• Keep a barrel blocking device installed on marker when not shooting (see page 4).

• Never point the marker at anything you do not intend to shoot.

• Never re your marker at anything you do not intend to shoot because there may

be paintballs or foreign debris lodged in the chamber, barrel, or the marker valve.

• Do not shoot at fragile objects such as windows.

• Never re your marker at personal property of others. The paintball impact can

cause damage and the paint can stain the nish of automobiles, houses, etc.

• Always keep the barrel pointed down or in a safe direction, even if you stumble or

fall.

• Eye, face, and ear protection designed specically to stop paintballs in the form of

goggles and full face mask meeting ASTM Specication F 1776 must be worn by

the user and any person within range.

• Never shoot at a person who is not protected by eye, face, and ear protection

designed for paintball.

• Pressurize and load a marker only when the marker will be immediately used.

• Store the marker unloaded and degassed in a secure place.

NOTE: Before storing or disassembling, be sure to remove paintballs and air

supply (see Unloading Your Marker on page 9, and Air Supply Cylinder

Removal on page 11), put the trigger safety in Safe mode (see page 6) and install

the barrel blocking device (see page 4).

• Do not eld strip or otherwise disassemble this marker while it is pressurized with

air supply.

• Dress appropriately when playing the game of paintball. Avoid exposing any skin

when playing the game of paintball. Even a light layer of clothing will help absorb

some of the impact and protect you from the paintballs.

• Keep exposed skin away from escaping gas when installing or removing the air

supply cylinder, or if the marker or air supply is leaking. Compressed air and CO2

gasses are very cold and can cause frostbite under certain conditions.

• Use only .68 caliber paintballs. Never load or re any foreign objects.

• Avoid alcoholic beverages before and during the use of this marker. Handling

markers while under the inuence of drugs or alcohol is a criminal disregard for

public safety.

• Avoid shooting an opponent at point blank range, 6 feet or less.

• Familiarize yourself with instructions listed on the air supply cylinder. Contact the

air supply cylinder manufacturer with any questions.

• Always measure your marker’s velocity before playing paintball and never shoot at

velocities in excess of 300 feet per second (see instructions on page 8).

• Always keep in mind that the sport of Paintball is viewed and judged by your safe

and sportsmanlike conduct.

Getting Started

• Eye protection designed for paintball use must be worn by the user and any person

within range.

• Do not disassemble this marker while it is pressurized with air.

• Do not pressurize a partially assembled marker.

• Read each step completely before performing the steps.

NOTE: Carefully hand start all threaded parts when assembling, and do not

overtighten, as this may potentially strip the threaded parts.

1. Air Supply Cylinder Installation.

Review Air Supply Cylinder Safety Tips (see page 10).

Push the trigger safety to the Safe mode (see page 6).

Install the barrel sleeve (see page 4).

Lubricate the cylinder valve o-ring with a little marker oil, then insert the cylinder valve

end into the air supply adapter at the back end of the marker grip. Twist the cylinder

clockwise into the air supply adapter until it stops. Use caution as the marker is now

ready to re.

2. Loading the Hopper

Insert the hopper into the feed neck of the receiver. Tighten the clamp bolt to secure

the hopper, but be careful not to over tighten, as this might collapse the hopper feed

tube.

Fill the hopper with .68 caliber paintballs. Do not force excessive numbers of paintballs

into the hopper.

3. Firing

Remove the barrel sleeve from the marker. Take the marker off Safe mode by pushing

the trigger safety to the Fire position. Grip the forearm grip with one hand and the

receiver in your other hand, pull the forearm grip rearward until it runs out of travel,

then push it forward until it again runs out of travel. Point the marker in a safe direction

and pull the trigger to shoot a paintball.

Breech lock: After one pump cycle, the marker cannot be pumped again until the

trigger is pulled. This is a feature to prevent double loading paintballs.

Auto Trigger: If you hold the trigger back while cycling the forearm grip, the marker will

re each time the forearm grip is pumped.

Note: If you attempt to pump the marker with the trigger safety in Safe mode, the

forearm grip will not travel forward to complete the pump cycle.

Velocity Adjustment

Each time you play paintball, check the velocity of your

paintball marker with a chronograph (an instrument for

measuring velocity) prior to playing paintball. Verify that

the marker’s velocity is set below 300 feet per second or

less if required by the playing eld.

To adjust the marker’s velocity, use the included 3mm

allen wrench. The velocity adjustment screw is located

on the left side of the receiver, as shown in Figure 2. To

reduce the velocity, turn the screw clockwise. To increase

the velocity, turn the screw counterclockwise. Do not remove the velocity screw.

Figure 2: Velocity Adjustment

Velocity

Screw

Unloading Your Marker

1. Eye protection designed for paintball use must be worn by the user and any person

within range.

2. Empty and remove the hopper.

3. Go to a designated ring area, remove the barrel sleeve and turn off trigger safety.

4. Point your marker in a safe direction and re several times to be sure there are no

paintballs lodged in the chamber or barrel. Visually inspect the chamber for paintballs.

5. Return the trigger safety to the Safe mode (see page 6). Reinstall the barrel sleeve (see

page 4).

Air Supply Cylinder Warnings

WARNING

The brass or nickel plated cylinder valve (Figure 3, #1)

is intended to be permanently attached to the air or CO2

cylinder (2).

An air or CO2 cylinder can y off with enough force to cause

serious injury or death if the cylinder (2) unscrews from a

cylinder valve (1).

Refer to Figure 3. There have been reported incidents caused

by players unknowingly unscrewing the cylinder (2) from the

cylinder valve (1). This occurs when the player thinks the

entire valve-cylinder assembly is being unscrewed from the

air supply adaptor of the paintball marker, when in fact they

are unscrewing the cylinder from the cylinder valve.

To avoid this danger, it is recommended (if your cylinder is

not already marked) that you use paint or nail polish to place

a mark (3) on the cylinder valve, and place another mark (4)

on the cylinder, in line with the #3 mark as shown.

Whenever you turn the cylinder during removal, watch the

marks on the cylinder and the cylinder valve to be sure

that they rotate together. If at any time these marks start

to separate as shown in Figure 4, the cylinder is starting to

unscrew from the cylinder valve and you must STOP and

take the entire unit to a “C5” certied airsmith for safe removal

and/or repair.

NOTE: The cylinder valve should unscrew from the paintball

marker in about 3 or 4 full turns. If you nish the 4th full turn

and the cylinder valve is not unscrewed from the paintball

marker, STOP! Take the entire unit to a “C5” certied

airsmith for safe removal and/or repair.

Locate a “C5” Certied Airsmith at www.paintball-pti.com/

search.asp.

Figure 3: Marked Cylinder and

Valve

Figure 4: Misaligned Cylinder

and Valve

Whether you have a new or used rellable air or CO2 cylinder, you are at risk if any of the

following has occurred:

• The valve unit was replaced or altered after purchase.

• An anti-siphon device was installed.

• The valve unit was removed from the cylinder for any reason.

• Any modication was done to the rellable air or CO2 cylinder.

If any of these conditions has occurred, take your air or CO2 cylinder to a “C5” Certied

Airsmith for inspection or contact the cylinder manufacturer.

Air Supply Cylinder Safety Tips

SAFETY TIPS to ensure that your air or CO2 cylinder is safe for play:

• Improper use, lling, storage, or disposal of air or CO2 cylinder may result in

property damage, serious personal injury or death.

• Make sure that any maintenance or modication to any air or CO2 cylinder is done

by a qualied professional, such as a “C5” certied airsmith.

• The use of anti-siphon devices is not recommended. However, if one is already

installed on your air or CO2 cylinder or is desired, it is critical that your cylinder be

checked by, or the device installed by, a qualied professional.

• All air or CO2 cylinders must be lled only by properly trained personnel.

• Cylinder valves must be installed only by properly trained personnel.

• Do not overll!! Never exceed the air or CO2 cylinder’s capacity.

• Do not expose pressurized air or CO2 cylinder to temperatures exceeding 130

degrees Fahrenheit (55 degrees Celsius).

• Do not use caustic cleaners or strippers on the air or CO2 cylinder or cylinder valve

and do not expose to corrosive materials.

• Do not modify the air or CO2 cylinder in any way. Never try to disassemble the

cylinder valve from the air or CO2 cylinder.

• Any air or CO2 cylinder that has been exposed to re or heated to a temperature

of 250 degrees Fahrenheit (121 degrees Celsius) or more must be destroyed by

properly trained personnel.

• Use appropriate gas for your cylinder. Only use CO2 in a CO2 cylinder and only use

compressed air in a compressed air cylinder.

• Keep all cylinders out of the reach of children.

• The Air or CO2 cylinder should be inspected and hydrostatically retested at least

every 5 years by a DOT licensed agency.

• Keep exposed skin away from escaping gas when installing or removing air supply,

or if the marker or air supply is leaking. Compressed air and CO2 gasses are very

cold, and can cause frostbite under certain conditions.

NOTE: Locate a “C5” certied airsmith at www.paintball-pti.com/search.asp

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Tippmann Accessoires de jeux vidéo

Tippmann

Tippmann ALPHA BLACK MARKER LINE Manuel utilisateur

Tippmann

Tippmann A-5 RESPONSE Manuel utilisateur

Tippmann

Tippmann CARVER ONE Manuel utilisateur

Tippmann

Tippmann GRYPHON Manuel utilisateur

Tippmann

Tippmann FT-12 Manuel utilisateur

Tippmann

Tippmann X7 PHENOM Manuel utilisateur

Tippmann

Tippmann 98 CUSTOM MARKER LINE Manuel utilisateur

Tippmann

Tippmann 98 Custom Basic Manuel utilisateur

Tippmann

Tippmann TPX Manuel utilisateur

Tippmann

Tippmann A-5 WITH E-GRIP Manuel utilisateur

Tippmann

Tippmann A-5 RESPONSE Manuel utilisateur

Tippmann

Tippmann A-5 RESPONSE Manuel utilisateur

Tippmann

Tippmann A-5 MARKER LINE Manuel utilisateur

Tippmann

Tippmann A-5 RESPONSE Manuel utilisateur

Tippmann

Tippmann T201008 Manuel d'installation

Tippmann

Tippmann X7 PHENOM Manuel utilisateur

Tippmann

Tippmann SIERRA ONE MARKER Manuel utilisateur

Tippmann

Tippmann A-5 SERIES Manuel utilisateur

Tippmann

Tippmann TRIUMPH MARKER LINE Manuel utilisateur

Tippmann

Tippmann BRAVO ONE SERIES Manuel utilisateur

Tippmann

Tippmann E-TRIGGER T206002 Manuel utilisateur

Tippmann

Tippmann Supplier Requirements Manuel utilisateur

Tippmann

Tippmann A-5 RESPONSE Manuel utilisateur

Tippmann

Tippmann CARVER ONE Manuel utilisateur

Manuels Accessoires de jeux vidéo populaires d'autres marques

VENOM

VENOM VS3057 Manuel utilisateur

LINK-MI

LINK-MI HDVC01 Manuel utilisateur

Thrustmaster

Thrustmaster T60 Manuel utilisateur

Avermedia

Avermedia C875 Manuel utilisateur

VENOM

VENOM VS2728 Manuel utilisateur

DGT

DGT 960 Manuel utilisateur

Sega

Sega Visual Memory Unit Manuel utilisateur

Datel

Datel Go-tcha Expedition Manuel utilisateur

TruGolf

TruGolf TruFlight 2 Manuel utilisateur

CH Products

CH Products CH PRO THROTTLE Manuel utilisateur

Thrustmaster

Thrustmaster T2PA Manuel utilisateur

Cube Controls

Cube Controls Mercedes-AMG - GT Edition SIM Wheel Manuel utilisateur

Hoffmann

Hoffmann Club Pro Manuel utilisateur

ardistel

ardistel ADT SpeedRacer Manuel utilisateur

Sven

Sven GC-W150 Manuel utilisateur

Deltaco Gaming

Deltaco Gaming GAM-131 Manuel utilisateur

Huffy

Huffy M731324 Manuel utilisateur

Ace Bayou

Ace Bayou X Rocker Manuel utilisateur