Thrustmaster T.FLIGHT STICK X Manuel utilisateur
1/12
User Manual
TECHNICAL FEATURES
1. USB selector (PC / PS3) 6. Sliding thumb throttle
2. PC and PlayStation® 3 USB connector 7. LED
3. ultidirectional “Point Of View” hat-switch 8. PRESET button
4. 12 action buttons (to select programming)
5. Rudder function via twisting handle 9. Handle resistance
with locking screw adjustment dial
2/12
C
INSTALLATION ON C
1. Set your joystick’s USB selector (1) to the “ C” position.
2. Connect the USB connector (2) to one of your computer’s USB ports. Windows XP or
Vista will automatically detect the new device.
3. The drivers are installed automatically.
Follow the on-screen instructions to complete the installation.
4. Click Start/Settings/Control anel and then double-click Game Controllers.
The Game Controllers dialog box displays the joystick’s name with OK status.
5. In the Control anel, click roperties to configure your joystick.
Test device: Lets you test and view all of your joystick’s functions.
You are now ready to play!
IM ORTANT NOTES FOR C
- Your joystick’s USB selector (1) must always be set to the “ C” position before connecting
your joystick.
- When connecting your joystick: Leave the handle and rudder centered and do not move
them (to avoid any calibration problems).
3/12
“AUTOMATIC RESET” CONFIGURATION - C
“AUTO ATIC PRESET” diagram on PC
RED LED
This preset corresponds to the default configurations for most aerial simulation games on
PC.
It will therefore allow you to start playing your game right away, without having to reconfigure
your joystick.
4/12
LAYSTATION® 3
INSTALLATION ON LAYSTATION® 3
1. Set your joystick’s USB selector (1) to the “ S3” position.
2. Connect the USB connector (2) to one of your console’s USB ports.
3. Switch on your console.
4. Launch your game.
You are now ready to play!
USING THE “HOME / S” BUTTON
Your joystick’s “Home / PS” button allows you to exit your games, access menus and directly
switch off your PlayStation®3 system.
IM ORTANT NOTES FOR LAYSTATION® 3
- Your joystick’s USB selector (1) must always be set to the “ S3” position before connecting
your joystick.
- In “1 Player” mode: If your official gamepad is on, you must switch it to “controller port 2” in
order for your joystick to be functional.
- On PlayStation® 3, the joystick is only compatible with PlayStation® 3 games (and will not
function with PlayStation® 2 games).
- When connecting your joystick: Leave the handle, rudder and throttle centered and do not move
them (to avoid any calibration problems).
5/12
“AUTOMATIC RESET” CONFIGURATION - LAYSTATION® 3
“AUTO ATIC PRESET” diagram on PlayStation® 3
RED LED
This preset corresponds to the default configurations for most aerial simulation games on PlayStation® 3.
It will therefore allow you to start playing your game right away, without having to reconfigure your
joystick.
The 4 handle directions: Correspond to the 4 directions on your gamepad’s left mini-stick.
The throttle (6): Corresponds to the Up/Down directions on your gamepad’s right mini-stick.
The rudder (5): Corresponds to the Left/Right directions on your gamepad’s right mini-stick.
MA ING button: Simultaneously press SELECT (SE) + START (ST).
HOME / S button: Simply press the button.
6/12
GETTING TO KNOW YOUR JOYSTICK
Adjustable handle resistance
Depending on your gaming style, you may prefer to have an ultra-sensitive joystick, which
responds to the slightest movement, or a firmer joystick, which offers a certain resistance
when you use it.
Your joystick’s handle resistance is adjustable, in order to adapt to all gamers. To adjust it,
use the handle resistance adjustment dial (9) located under your joystick’s base.
Throttle
The throttle is in the form of a thumb slider (6), easily accessible with your left hand resting
on the base of your joystick.
Rudder function
Your joystick features a rudder function, which in a plane corresponds to the pedals used by
the pilot to turn the steering, allowing the plane to pivot around its vertical axis (therefore
making the plane turn left or right). This rudder function is accessible on your joystick by
rotating the handle to the left or right.
If you are not using the rudder function in your games (or if you have programmed it onto
action buttons), you can disable handle rotation thanks to the locking screw (5) located on
the handle’s base.
Use a flat head screwdriver to change the screw’s position and thus lock/unlock the rudder
function.
Multidirectional “ oint Of View” hat-switch
Your joystick features a “Point Of View” hat-switch (3) which, as its name indicates, allows
you (in games which permit) to instantly view everything that’s going on around your plane.
To do so, simply go to your game’s configuration menu and program the different views (rear
view, left view, right view, and also external views) onto the directions of the “Point Of View”
hat-switch.
Of course, you can also use the “Point Of View” hat-switch for other functions instead (firing,
etc.).
7/12
2 ROGRAMMING MODES
The RESET button (8) and LED (7) allow you to view the type of programming selected:
AUTO ATIC (preprogrammed) or ANUAL (programmed by yourself).
A single press of this button will allow you to switch from one programming mode to the
other, even during the course of a game.
•AUTOMATIC RESET: RED LED
This represents the default programming: the axes, positions of the buttons and of the hat-
switch are preprogrammed.
PLEASE REFER TO THE “AUTO ATIC PRESET” CONFIGURATION DIAGRA S.
•MANUAL RESET: GREEN LED
This represents your own person programming:
- The buttons, axes and the hat-switch can be switched between themselves.
- You can modify the programming to suit your taste and whenever you like.
- Programming is automatically saved in your joystick (even when it is disconnected).
- When your “ ANUAL PRESET” is blank, it is identical to the “AUTO ATIC PRESET”.
ROGRAMMING / MA ING
You can program your joystick using the APPING button.
Attention: This button is not located in the same position on PC and PS3 (please refer to
the diagrams):
-On PC: Directly press the button in question.
-On PS3: Simultaneously press START (ST) + SELECT (SE).
•Examples of possible applications:
- Switching the positions of buttons.
- Switching axes between themselves = directions of the handle, of the throttle or of the
rudder (In this case, you must map the 2 directions of the first axis to those of the
second.)
- Switching the 2 directions of the same axis.
- Switching buttons with a direction of an axis or of the hat-switch.
•Exception:
On PlayStation® 3, the START (ST) and SELECT (SE) buttons also correspond to the
APPING button (and therefore may not be reprogrammed).
8/12
ROGRAMMING ROCEDURE
Steps Action LED
1 Enable ANUAL PRESET (8)
by pressing the button. GREEN
2 Press and release the APPING button. OFF
3 Press and release the button or direction to program. FLASHES GREEN
4 Press and release the button or direction onto which you
wish to place your function. GREEN
Your “ ANUAL PRESET” is now enabled and up to date
(with your programming carried out).
EE ROM MEMORY
•Your joystick features an internal chip which saves all of your “ ANUAL PRESET”
programming in memory (even when the joystick is switched off or unplugged for a long
period of time).
•You can save a different “ ANUAL PRESET” for each platform used (one for PC and one
for PlayStation® 3).
ERASING A “MANUAL RESET”
Steps Action LED
1 Enable your ANUAL PRESET (8). GREEN
2 Press and hold the APPING button
for 2 seconds.
FLASHES GREEN
2 SECONDS
Your “ ANUAL PRESET” is now blank
(and once again identical to the “AUTO ATIC PRESET”).
RETURNING TO “FACTORY SETTINGS”
You can erase all of your programming or settings carried out on both PC and
PlayStation® 3 with a single step:
Step Action LED
1 Simultaneously press the buttons
MA ING + 11 (SE) + 12 (ST)
FLASHES GREEN/RED
2 SECONDS
All of your “ ANUAL PRESETS” (PC + PS3) or settings are now blank.
Note: This operation will completely restart your joystick
(on PC, we therefore recommend that you do this outside of games).
9/12
TROUBLESHOOTING AND WARNING
•My joystick doesn’t function correctly or appears to be improperly calibrated:
- Switch off your computer or your console, disconnect your joystick, reconnect your joystick
and then re-launch your game.
- When connecting your joystick: Leave the handle, rudder and throttle centered and do not
move them (to avoid any calibration problems).
- Exit your game, disconnect your joystick, verify that the USB selector (PC / PS3) (1) is set
to the proper position, then reconnect your joystick.
•I can’t configure my joystick:
- In your game’s “Options / Controller / Gamepad or Joystick” menu: Select the most
appropriate configuration or completely reconfigure the controller options.
- Please refer to your game’s user manual or online help for more information.
- You can also use your joystick’s “ APPING” function to resolve this type of problem.
•My joystick is too sensitive or not sensitive enough:
- Your joystick self-calibrates on its own after you have made a few movements on the
different axes.
- In your game’s “Options / Controller / Gamepad or Joystick” menu: Adjust the sensitivity or
dead zones for your controller (if this option is available).
- Adjust the handle resistance using the dial (9) located under your joystick’s base.
Autres manuels pour T.FLIGHT STICK X
1
Table des matières
Langues :
Autres manuels Thrustmaster Manettes de jeux vidéo
Thrustmaster
Thrustmaster FERRARI MOTORS Manuel utilisateur
Thrustmaster
Thrustmaster Ferrari Manuel utilisateur
Thrustmaster
Thrustmaster dual trigger Manuel utilisateur
Thrustmaster
Thrustmaster Ferrari GTE Wheel Add-On Manuel utilisateur
Thrustmaster
Thrustmaster Ferrari F430 Manuel utilisateur
Thrustmaster
Thrustmaster TX Leather Edition Manuel utilisateur
Thrustmaster
Thrustmaster FORZA MOTORSPORT 5 Manuel utilisateur
Thrustmaster
Thrustmaster Rechargeable Wireless Dual Trigger 2-in-1 Manuel utilisateur
Thrustmaster
Thrustmaster ADVANCE WIRELESS DUAL TRIGGER Manuel utilisateur
Thrustmaster
Thrustmaster HOTAS Cougar Instructions d'utilisation
Thrustmaster
Thrustmaster T.Flight Hotas X Manuel utilisateur
Thrustmaster
Thrustmaster TS-PC Racer Ferrari 488 Challenge Edition Manuel utilisateur
Thrustmaster
Thrustmaster TMX Force Feedback Manuel utilisateur
Thrustmaster
Thrustmaster T500 RS Manuel utilisateur
Thrustmaster
Thrustmaster MFD Cougar Manuel utilisateur
Thrustmaster
Thrustmaster GPX LightBack Manuel utilisateur
Thrustmaster
Thrustmaster Alcantara Edition 599XX EVO 30 Manuel utilisateur
Thrustmaster
Thrustmaster 360 Spider Instructions d'utilisation
Thrustmaster
Thrustmaster TCA Quadrant Add-On Airbus Edition Manuel utilisateur
Thrustmaster
Thrustmaster universal challenge Manuel utilisateur
Manuels Manettes de jeux vidéo populaires d'autres marques
Nerf
Nerf DuraGrip Manuel utilisateur
MoveMaster
MoveMaster MoveMaster Manuel utilisateur
WinWing
WinWing Super Libra J1 Manuel utilisateur
ECCI
ECCI Trackstar 6000 Series Manuel utilisateur
Logitech
Logitech 963291-0403 - Attack 3 Joystick Manuel utilisateur
Pelican
Pelican Afterglow PL-678 Manuel utilisateur