Theben PlanoCentro 101-E Series Manuel utilisateur
1103053605 / 09.2010 © Theben HTS
Art. Nr.
203 0 . . .
PlanoCentro 101-A-230V
PlanoCentro 101-E . .
PlanoCentro 101-U . .
Presence detector
Bedienungsanleitung 2
Notice d'utilisation 46
Operating Manual 90
Manual de instrucciones 134
Istruzioni per l'uso 178
Gebruikshandleiding 222
Bruksanvisning 266
Bruksanvisning 310
Käyttöohje 354
Betjeningsvejledning 398
DK
D
F
GB
E
I
NL
S
N
FIN
90
English Operating Manual
Presence detector
PlanoCentro 101-A-230V
PlanoCentro 101-E . .
PlanoCentro 101-U . .
Table of contents
1. Safety.........................91
2. Function and performance . . . . . . . . . 92
3. Installation.....................95
4. Connection / Operation mode. . . . . . 100
5. Start-up......................105
6. Parameters....................109
7. Read-out data . . . . . . . . . . . . . . . . . 117
8. Test-Mode ....................118
9. Control commands . . . . . . . . . . . . . . 122
10. Diagnostics and statistics . . . . . . . . . 122
11. Troubleshooting . . . . . . . . . . . . . . . . 124
12. Technical data . . . . . . . . . . . . . . . . . 126
13. Dimension drawings . . . . . . . . . . . . . 130
14. Warranty declaration.............131
91
GB
Thank you for purchasing a Theben HTS presence detector and putting your trust in us.
1. Safety
!
CAUTION!
Danger of death through electric shock or re!
Installation should only be carried out by a qualied electrician!
Work done on electrical installations may only be conducted by an authorised electrician or
trained persons under the supervision and charge of an authorised electrician according to
electrotechnical regulations!
Observe country-specic safety guidelines for working on electric installations! The voltage
supply must be disconnected before installation!
!CAUTION!
The device is maintenance-free. The warranty terminates if the device is opened or entered with
any kind of object.
1.1 Designated use
The presence detector is intended for indoor installation.
The presence detector is solely intended for the purpose contractually specied between the
manufacturer and the user. Any other or extended use has to be regarded as not complying with
the designated use. The manufacturer is not liable for any resulting damage. Radio frequency has
to be followed.
92
2. Function and performance
The presence detector series PlanoCentro is intended for ceiling mounting.
●Installation in suspended ceilings (false ceilings)
●Installation in ush-mounted junction box (set into concrete ceiling)
Devices are available in the delivery unit with matching assembly sets for ceiling installation and
ush-mount ceiling installation.
The presence detector PlanoCentro 101 is intended for use in ofces, schools and residential
premises for comfortable and energy efcient control of lighting, HVAC and shading.
●Detection range up to 100m2moving and 64m2seated persons at 3.5 m installation height
●Mixed light measurement
●Adjustable sensitivity
The PlanoCentro 101 has 2 channels:
●Channel A light
●Channel H presence
Helpful functions are available for start up and subsequent maintenance support.
●Data read-out (parameters, actual brightess, diagnostic and statistic data)
●Diagnostic functions
The presence detector can send conguration and diagnostic information to the SendoPro Man-
agement remote control via radio transmission (868MHz).
93
GB
The channel A light switches on the lighting in case of presence and insufcient brightness,
and it switches off in case of absence or sufcient brightness. The light can be manually switched
on/off by means of push-buttons or switches.
●Switching contact light: Relay 230V
●Automatic recognition of push-button or switch
●Half or fully automatic function mode
●Crossover switch
●Adjustable brightness value and switch-off delay time
●Self-learning switch-off delay time
●Suitable for uorescent lamps, compact uorescent lamps, halogen, incandescent lamps and
LEDs.
●Pulse control for controlling staircase lighting timer
●Reduced switch-off delay time in case of a short presence
●Remote operation with SendoClic
The channel H presence controls heating, ventilation and air conditioning systems (HVAC). The
contact closes with presence, a switch-on delay enables delayed switching on. The contact can
be used for room monitoring. Thereby, it reacts to signicant movement with lower sensitivity.
●Switching contact presence: Relay potential-free
●Programmable switch-on delay
●Programmable switch-off delay time
●Monitoring function
●Switch to the functionality like the channel A light
94
2.1 Scope of delivery
Ceiling installation
1 Presence detector with installation
protection cover (removable)
2 PlanoCap (terminal cover)
3 PlanoFix E (installation frame)
4 Strap, 6 pieces
5 PlanoCover (frame)
6 Template for ceiling cut out
7 Operating Manual
Flush-mounted installation
1 Presence detector with installation
protection cover (removable)
2 PlanoFix U (installation plate)
3 PlanoCover (frame)
4 4 screws
5 Operating Manual
1
1
2
2
3
3
4
4
75
5
6
95
GB
o
o
seated persons
moving persons
3. Installation
3.1 Presence detection
The ideal installation height is between 2.0 - 3.5 m. The sensitivity of the detector reduces with higher
installation heights. The presence detector requires a clear view of people in order to clearly detect
people. Ofces, mobile partition walls, plants, hanging lighting etc. can hinder (shadowing) the pres-
ence detector.
Detection range (installation height 3.0m)
install. height seated persons moving persons
2.0 m 20 m24,5m x 4,5m 36 m2 6,0m x 6,0m ± 0.5m
2.5 m 36 m26,0m x 6,0m 64 m2 8,0m x 8,0m ± 0.5m
3.0 m 49 m27,0m x 7,0m 81 m2 9,0m x 9,0m ± 1.0m
3.5 m 64 m28,0m x 8,0m 100 m2 10,0m x 10,0m ± 1.0m
96
3.2 Light measurement
The detector measures articial and daylight that is
reected directly below the detector (aperture ± 30°).
The surface brightness below the installation site is
used as a lighting level reference.
With indirect lighting, the articial light at the detec-
tor installation site must not exceed 2000 lux (with
brightness value >200 lux ).
97
GB
3.3 Ceiling installation
Ceiling installation of the presence detector takes place via the PlanoFix E installation frame and
straps in the cut out ceiling element.
PlanoFix E installation frame
1. Draw ceiling cut out
(A hinge is integrated into the top of the packaging)
2. Cut out the drawn form according to the materials with suitable
tools, 100 x 100 mm ± 1mm
3. Insert 4 straps into the PlanoFix E
4. Insert the PlanoFix E into the ceiling cut out with the straps
5. By pulling on the straps and pushing against the PlanoFix E, the
PlanoFix E is snapped securely into the ceiling element.
6. Cut the ends of the 4 straps
98
Monitoring the presence detector
1. Connect wires, see technical data page 123.
2. Fasten cable to the strain relief clamps and remove the excess
3. Fasten the PlanoCap
4. Make sure the locks on the PlanoFix E are open
5. Insert the presence detector into the PlanoFix E
6. Close the locks on the PlanoFix E
7. Remove installation protection
8. Attach the PlanoCover
The technical data is to be followed during assembly and installation.
See page 123 and following.
Ce manuel convient aux modèles suivants
10
Table des matières
Autres manuels Theben Capteur de sécurité
Theben
Theben thePixa P360 24V KNX UP WH Manuel utilisateur
Theben
Theben ECO-IR 180A Manuel utilisateur
Theben
Theben LUXA 103-100 AP WH Manuel utilisateur
Theben
Theben PlanoCentro 000-E Series Manuel utilisateur
Theben
Theben thePrema S360-101 E UP WH Manuel utilisateur
Theben
Theben 201 9 290 Manuel utilisateur
Theben
Theben TIMEGUARD LEDPROPCB Manuel
Theben
Theben theLuxa S150 WH Manuel utilisateur
Theben
Theben thePixa P360 KNX UP WH Manuel utilisateur
Theben
Theben thePassa P360-221 DALI UP WH Manuel utilisateur
Theben
Theben ECO-IR 180EIB-AC Manuel utilisateur
Theben
Theben compact office Manuel utilisateur
Theben
Theben theRonda P360-110 DALI UP WH Manuel utilisateur
Theben
Theben theRonda S360-100 DE GR Manuel utilisateur
Theben
Theben theRonda S360-100 UP WH Manuel utilisateur
Theben
Theben 201 0 090 Manuel utilisateur
Theben
Theben SPHINX 331 S KNX Manuel utilisateur
Theben
Theben theRonda P360-100 WH GST Manuel utilisateur
Theben
Theben 2080026 Manuel utilisateur
Theben
Theben compact office 24V Manuel utilisateur
