TFortis SWD-1 Manuel utilisateur

Operation manual

SWD-1 switch

PWR-48D power supply unit

Version 2.0

Table of Contents

1. Designation ............................................................................................3

2. Description .............................................................................................5

2.1. Appearance......................................................................................5

2.2. Element arrangement.......................................................................6

2.3. Power supply over PoE....................................................................7

2.4. CPU operation indication .................................................................7

2.5. Restart of video cameras at their hanging........................................7

3. Technical parameters.............................................................................8

SWD-1 switch ........................................................................................8

PWR-48D power supply.........................................................................8

4. Operating conditions...............................................................................9

5. Device installation...................................................................................9

5.1. Mounting..........................................................................................9

5.2. Power connection ............................................................................9

5.3. Connection of video cameras...........................................................9

1. Designation

SWD-1 –in Unmanaged Gigabit Switch with DIN-rail mounting. This device

has 4 ports for camera connections using PoE (see fig. 1-1). Where ports #4

and #5 support 1 Gigabit speed that allow to connect switches in a line

topology (see fig. 1-2)

PWR-48D –is a power supply unit with DIN-rail mounting. Designed for

powering SWD-1 switches from 230VAC. It is allowed to use one power

supply unit with two switches if the total power consumption ofvideo cameras

does not exceed 50W.

220 VAC

10/100/1000Base-T

10/100Base-TX + PoE

SWD-1

PWR-48D

48 VDC

Fig. 1-1. Connection diagram of 4 cameras

220 VAC

10/100/1000Base-T

10/100Base-TX + PoE

SWD-1

PWR-48D

48 VDC

10/100/1000Base-T

Fig. 1-2. Connection diagram of 3 cameras with the organization of a gigabit

loop-through connection.

PoE support (IEEE802.3af)

The switch can power any PoE video camera that supports IEEE802.3af

standard. Power is supplied over free pairs (4,5 and 7,8)

Ease of installation

A compact modular body allows to install a switch and a power supply unit

on a DIN-rail into any cabinets. Next to them you can install circuit breakers,

residual current devices and other equipment. It’s convenient to lead all the

wiring through cable channels or under suspended ceiling.

Aesthetic design.

SWD-1 switch andPWR-48D power supplyunit can be installed into a plastic

switchboard panel and will successfully fit into any interior of office or house.

Fig. 2. Switchboard panel with SWD-1 and PWR-48D

Gigabit ports

Due to the presence of two Gigabit ports, it is possible to connect switches

in a chain.

Informative indication

LED indicators are located on a front panel.

Cost effective port expansion

Two switches can be connected to PWR-48D power supply unit in case of

total power consumption of no more than 50W.

Automatic restart of video cameras at their hanging

The switch controls operation of video cameras. If video camera is hanging,

switch restart it automatically over PoE. This allows constructing non-

attended IP- video surveillance systems.

2. Description

2.1. Appearance

Fig. 2.1-1. SWD-1 switch

Fig. 2.1-2. PWR-48D power supply unit

2.2. Element arrangement

Fig. 2.2-1. SWD-1 element arrangement

Fig. 2.2-1. PWR-48D element arrangement

2.3. Power Supply over PoE

SWD-1 switch supports power supply using IEEE802.3af technology (4,5

and 7,8 pairs) for ports #1 .. #4. This eliminates the installation of separate

power cables.

2.4. CPU operation indication

During normal processor operation, the “RUN” indicator should flash with a

period of 2 seconds (1sec –on, 1 sec –off).

2.5. Restart of video cameras at their hanging

SWD-1 switch constantly controls traffic level (intensity) from the camera. If

the network activity falls below the set level the switch restarts the camera

by removing power from the PoE. This function is enabled by closing

contacts (fig. 2.5).

Fig. 2.5. Enabling function of automatic camera restart

3. Technical parameters

SWD-1 switch

Ports from №1 to №3

10/100Base-Tx;

PoE IEEE802.3af support (pairs 4,5 and 7,8) –15.4 W per port;

supports Auto-MDIX;

supports flow control of IEEE 802.3x;

transmission distance (data and PoE) – up to 100m.

Port №4

10/100/1000Base-T;

supports PoE IEEE802.3af (pairs 4,5 and 7,8) –15.4 W per port;

supports Auto-MDIX;

supports flow control of IEEE 802.3x;

transmission distance (data and PoE) – up to 100m.

Port №5

10/100/1000Base-T;

supports Auto-MDIX;

supports flow control of IEEE 802.3x;

data transmission distance – up to 100m.

Power supply

supply voltage –48VDC;

max power consumption without PoE not more than 3W.

Design

dimensions - 106х90х58 mm (width: 6 мmodules);

Maximum weight 0,3 kg;

DIN-rail mounting (35 mm).

PWR-48D power supply unit

Input voltage - ~ 230VAC (from 187V to 246V);

Output voltage –48VDC;

Maximum power consumption 60W.

Maximum output power 50W.

dimensions - 106х90х58 mm (width: 6 modules);

Maximum weight 0,3 kg;

DIN rail mounting (35 mm).

4. Operation conditions

The switch SWD-1 and PWR-48D power supply unit are intended for 24-hour

indoor operation in heated spaces at a temperature from +5 °С to +40 °С

and relative humidity up to 80%.

Mean time between failures for SWD-1 switch and PWR-48D power supply

unit is more than 50 000 hours (5-7 years).

The switch SWD-1 and PWR-48D power supply unit maintain declared

parameters at storage temperatures from -40 C to +50 C.

5. Device installation

5.1. Mounting

SWD-1 switch and PWR-48D power supply are mounted on a DIN-rail (35

mm)

5.2. Power connection

PWR-48D is connected to the AC source of 230VAC. SWD-1 switch is

recommended to connect to power supply unit with a short cable (no more

than 300 mm) with a cross-section no less than 0,75 sq mm. For stable

operation in the conditions with impulse noise it is recommended to arrange

grounding (no more than 4 Ohms).

5.3. Connection of video cameras

It is recommended to use a 4-pair shielded cable no worse than Category 5.

Ethernet cable is fanning out according to fig. 5.3.

Рис. 5.3. Fanning out of the Ethernet cable.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TFortis Changer

TFortis

TFortis PSW-11 Manuel utilisateur

TFortis

TFortis PSW-2G4F-Ex Feuille d'instructions

TFortis

TFortis PSW-2G6F+UPS-Box Manuel utilisateur

TFortis

TFortis PSW-2G4F-Box Manuel utilisateur

TFortis

TFortis PSW-1G4F-Box Manuel utilisateur

TFortis

TFortis PSW-2G+Hot Manuel utilisateur

TFortis

TFortis PSW-2G+ Manuel d'installation

TFortis

TFortis PSW-1-45-WiFi Manuel utilisateur

TFortis

TFortis PSW-2G2F+UPS Manuel utilisateur

TFortis

TFortis PSW-2G8F+Hot Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur