TFC TS1 Manuel utilisateur

1.Normal Mode

2. Clock and Date Setting

2.1

Press Both [SET] and [SELECT] for 3 seconds during

Normal Mode to enter the following screen.

Press [UP] or [DOWN] to select 24hr mode or 12hr mode.

2.2

Press [SELECT] button to set hour in following screen,

Then press [UP] or [DOWN] to set hour.

Press and hold [UP] or [DOWN] to scroll quickly.

2.3

Press [SELECT] button to set minute in following screen,

Then press [UP] or [DOWN] to set minute.

Press and hold [UP] or [DOWN] to scroll quickly.

2.4

Press [SELECT] button to set year in following screen,

Then press [UP] or [DOWN] to set year.

Press and hold [UP] or [DOWN] to scroll quickly.

2.5

Press [SELECT] button to set month in following screen,

Then press [UP] or [DOWN] to set month.

Press and hold [UP] or [DOWN] to scroll quickly.

2.6

Press [SELECT] button to set day in following screen,

Then press [UP] or [DOWN] to set day.

Press and hold [UP] or [DOWN] to scroll quickly.

The weekday will automatically calculate and display

during adjusting.

2.7

Press [SELECT] button to set daylight saving time in

following screen, Then press [UP] or [DOWN] to switch it

on/off.

Daylight saving time is set to ON

DST symbol displays.

Daylight saving time is set to OFF

DST symbol disappears.

Daylight saving time：When enabled, the clock will

automatically shift 1 hour ahead of the set standard time

from the last Sunday in March at 2:00am until the last

Sunday in October at 2:00am.

2.8

Press [SELECT] to go back to 2.1.

Press [SET] to confirm setting and back to Normal Mode.

The device will automatically confirm settings and revert

to Normal Mode, if no button is pressed for 15 seconds

3. Program Setting

Type

Operation

1day

Every day of the week is programmed

with the same ON/OFF times.

5/2day

Monday to Friday are programmed with

the same ON/OFF times.

Saturday to Sunday are programmed with

the same ON/OFF times.

7days

Each day of the week is programmed

independently thereby allowing different

ON/OFF times.

Factory default program setting (in 24hr mode)

Prog

Switching

[1day] [5/2day] [7days]

6:00

OFF

8:00

10:00

OFF

12:00

18:00

OFF

22:00

3.1

Press [SET] Button at normal mode to enter into Main

Program Setting Mode.

Press [UP] or [Down] to select program type.

LCD display: 1day=Pt:1d 5/2day=Pt:52 7day=Pt:7d

3.2.1

1day mode program setting.

After selecting the 1day program type, press the channel

1 [MODE] button to confirm and to set the channel 1

program.

To set Channel 1 P1-ON.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to set Channel 1 P1-OFF.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to set Channel 1 P2-ON.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to select among the items to be reviewed

or adjusted with the below sequences.

P1ON(Hour→Minute) →P1OFF(Hour→Minute) →

P2ON(Hour→Minute) →P2OFF(Hour→Minute) →

P3ON(Hour→Minute) →P3OFF(Hour→Minute) →

P1ON(Hour→Minute)

Press [SET] at any

time to confirm current setting and go back to main

program setting mode, then press [SET] to go back to

normal mode.

The device will automatically confirm current setting and

revert to Normal Mode, if no button is pressed for 60

seconds.

3.2.2

5/2day mode program setting.

After selecting the 5/2day program type, press the

channel 1 [MODE] button to confirm and to set the

channel 1 program.

To set Channel 1 Weekday P1-ON.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to set Channel 1 Weekday P1-OFF.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to set Channel 1 Weekday P2-ON.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to select among the items to be reviewed

or adjusted with the below sequences.

Weekday P1ON(Hour→Minute) →Weekday

P1OFF(Hour→Minute) →

Weekday P2ON(Hour→Minute) →Weekday

P2OFF(Hour→Minute) →

Weekday P3ON(Hour→Minute) →Weekday

P3OFF(Hour→Minute) →

Weekend P1ON(Hour→Minute) →Weekend

P1OFF(Hour→Minute) →

Weekend P2ON(Hour→Minute) →Weekend

P2OFF(Hour→Minute) →

Weekend P3ON(Hour→Minute) →Weekend

P3OFF(Hour→Minute) →

cycle back to Weekday P1ON(Hour→Minute)

Press [SET] anytime to confirm current setting and go

back to main program setting mode, then press [SET] to

go back to normal mode.

The system will automatically confirm current settings

and go back to Normal Mode, if no button is pressed for

60 seconds.

3.2.2

7day mode program setting.

After selecting the 7day program type, press the channel

1 [MODE] button to confirm and to set the channel 1

program.

To set Channel 1 Monday P1-ON.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to set Channel 1 Monday P1-OFF.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to set Channel 1 Monday P2-ON.

Press [UP] or [DOWN] to set hour. Then press [SELECT]

and press [UP] or [DOWN] to set minute.

Press [SELECT] to select among the items to be reviewed

or adjusted with the below sequences.

Monday P1ON(Hour→Minute) →Monday P1OFF(Hour→

Minute) →

Monday P2ON(Hour→Minute) →Monday P2OFF(Hour→

Minute) →

Monday P3ON(Hour→Minute) →Monday P3OFF(Hour→

Minute) →

......

Sunday P1ON(Hour→Minute) →Sunday P1OFF(Hour→

Minute) →

Sunday P2ON(Hour→Minute) →Sunday P2OFF(Hour→

Minute) →

Sunday P3ON(Hour→Minute) →Sunday P3OFF(Hour→

Minute) →

cycle back to Monday P1ON(Hour→Minute)

Press [SET] anytime to confirm current setting and go

back to main program setting mode, then press [SET] to

go back to normal mode.

The system will automatically confirm current setting and

go back to Normal Mode, if no button is pressed for 60

seconds.

Note: After confirming / adjusting the program

settings, all channels will reset to auto mode.

4. Operating Mode Selection

4.1 Normal Operating Mode

Continuously on

ONCE

On for 1 period a day, from

Program 1 ON to Program 3 OFF

AUTO

Automatic program control

OFF

Continuously off

Press [MODE] of Channel 1 Controls to select different

operating modes with the below sequences.

ON→ONCE→AUTO→OFF→ON

Operating mode: ON

Operating mode: ONCE

Operating mode: AUTO

Operating mode: OFF

4.2 Special Operating Mode

4.2.1 [+1Hr] function.

Press [+1Hr] of Channel 1 Controls to temporarily switch

on channel 1. Subsequent press of [+1Hr] to increase the

duration by 1 hour. Maximum duration is 9 hours. If the

number rolls back to "0", this will disable the [+1Hr]

Program Override.

Press [SET] or wait 5 seconds without key press to start

counting down.

Press [+1Hr] to set the number to “0” to cancel.

+1Hr function is activated.

Note: Remaining run time, 1minute to 60minutes will be

indicated as 1hour

[+1Hr] function can be activated from AUTO, ON, ONCE

and OFF modes.

4.2.2 Advance function.

This function allows the user to bring forward the next

switching time.

If the channel is currently timed to be OFF and the ADV is

pressed, the channel will be switched ON until the next

switching time.

if the channel is currently timed to be ON and the ADV is

pressed, the channel will be switched OFF until the next

switching time.

Press the [ADV] button of channel 1 controls to advance

channel 1.

Press the respective [ADV] button to cancel this function.

ADV function is activated

[ADV] function can be activated from AUTO and ONCE

modes.

4.2.3 Note

Only one special operation mode can be activated at the

same time. If [+1Hr] is activated, the [ADV] cannot be

set to be activated.

When a special operation mode is activated, the normal

operation mode cannot be selected, until the special

operation is deactivated, or manually cancelled.

5. Other functions

5.1 Frost Protection function

This function is set to protect pipes against freezing or to

prevent low room temperature when the programmer is

programmed to be OFF, or is manually OFF.

At normal mode screen, press and hold [Frost ON/OFF]

for 3seconds to set the frost protection temperature.

Then press [UP] or [DOWN] to adjust. Selectable range

5~20℃in 0.5℃steps.

At normal mode screen, press [Frost ON/OFF] button one

time to activate this function, denoted by the display frost

symbol. Press [Frost ON/OFF] button again to deactivate,

and the frost symbol `will disappear.

When the Frost Protection starts to work, the frost

symbol will flash. All channels will be switched ON in the

event of the room temperature falling to the frost

protection set point.

5.2 Holiday Mode

At normal mode screen, press and hold [HOLIDAY

ON/OFF] for 3seconds to enter holiday mode setting

mode.

Press [UP] or [DOWN] to adjust. Selectable 0~60days

Then press [SET] to confirm setting, and activate holiday

mode.

All channel will be switched OFF, until the holiday mode is

deactivated.

Press and hold [HOLIDAY ON/OFF] button for 3seconds

to deactivate, when the holiday mode is activated. The

programmer returns to normal mode.

The Programmer counts each pass through midnight as a

day.

6. Other & Specifications

Press any key to activate Backlight.

The backlight will automatically turn off 5 seconds after

all keys are released.

LCD backlight can only operate when AC supply is

connected.

LCD backlight is illuminated throughout the Clock,

Program, and Temporary Override Temperature settings.

If the AC supply fails, the programmer will stop working.

The cell battery will keep the clock working and saves the

program setting for 1 year.

Replace the cell battery, when the battery symbol is

flashing on the display.

Replacement battery model: CR2032

Power supply: 230VAC 50/60Hz

Switch rating: @ 230VAC 3(1)A

Operating temperature range:0~50OC

Table des matières

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur