TeVii D200 iCapture Manuel utilisateur
D200 iCapture
User Manual
1
Important Safety Instructions
Before using D200 iCapture, please ensure that you
read and understand the safety precautions below:
1. Do not attempt to open the case of D200 iCapture or
modify it in any way, as this will void the warranty.
2. Keep D6200 iCapture Box away from water and other liquids,
as this may cause the unit to malfunction.
3. D200 iCapture may become warm during use. This does
not indicate malfunction.
4. Do not place heavy objects on D200 iCapture, as this may
cause the unit to overheat and malfunction.
5. If the exterior of D200 iCapture requires cleaning, wipe it
with a soft dry cloth.
6. Do not dispose of the unit via conventional domestic waste.
2
Table of Contents
Important Safety Instruction ............................................……………1
Table of Contents ............................................................................ 2
What’s included ............................................................................... 3
Product Connectors ........................................................................ 4-5
Connection Instruction and installtion .................................................. 6
Connecting iPhone & iOS upgrade instruction........................................6-8
Standalone Mode
1. Installation ............................................................................. 8
2. Record / Capture to USB HDD or Pen Drive ............................... 9
3. Set Up by OSD ....................................................................... 9-11
PC Mode
1. Software Installation & Connection ..................................... 12-13
2. PC Software (GXPlayer) registration & key features ... …….. 14-15
Upload video to YouTube ............................................................ 16-18
Live Streaming via XSplit ............................................................ 19-21
Live Streaming via OBS .............................................................. 22-24
Record / Capture to PC ................................................................ 25-26
Schedule Recording & Set up ........................................................ 26-27
New Firmware Upgrade Instruction ................................................. 28
Supported Resolutions ..................................................................... 28
Product Specification ....................................................................... 29
Contact .................................................................................................29
3
What's included
4
Product Connectors
Power on and REC/STOP button
1. LED indicator for recording:
- Blue: Recording videos in 1080p
- Green: Recording videos in 720p
2. DC input 12V/1A : DC jack for power adaptor
3. Lightning IN : USB input for lightning cable (iPhone / iPad)
4. HDMI IN : HDMI input
5. AV/L/R IN: AV/Audio L/R cable
6. HDMI OUT : HDMI output
7. USB TO PC : Micro USB for connecting to computer.
8. TF card (Micro SD) input : (Standalone mode only)
9. USB Storage : USB connector for USB HDD/USB Flash Drive
10. Line Out: Audio output
11. MIC: Microphone input
12. IR: Infrared Receiver for remote control
5
6
Connection instruction and installation (Standalone Mode)
How To Record Videos and iPhone content To USB Storage (Standalone Mode)
1. Installation
(1) Connect power adapter to DC jack of D200
(2) Connect video source (PS, XBox, Blu-ray DVD) to D200 by HDMI : HDMI in
Connect iPhone to D200 by Lightning :
AV: AV/L/R
(3) Connect D200 from HDMI OUT to TV via HDMI cable.
(4) Plug the USB storage device into the USB of D200 iCapture
Connecting iPhone & iOS upgrade instruction
1. Connection to iPhone: Plug & Play
Connect D200 to iPhone by lightning cable and select “Trust” on screen,
wait for 10 seconds, then iPhone screen will be projected to TV screen
7
2. Set up mode: Upgrade firmware for new iOS
A. Open Personal Hotspot on iPhone，Setting Personal
Hotspotopen
B. Use a pin to press switch button (on the bottom of D200 case)
C. Connect D200 to iPhone
D. Open iPhone browser and input IP address shown on the TV screen
E. Click “Upgrade” on iPhone screen
8
9
2. Record/Capture to USB HDD or Pen Drive
(1) After all devices are connected properly, the power will switch on automatically.
(2) Press the REC/STOP button on the capture box or press the REC button on the remote
control to start recording.
(3) Press the REC/STOP button again on the capture box or press the STOP button on the
remote control to stop recording. The recorded files will be saved to USB storage or HDD.
NOTE: D200 supports FAT32 & NTFS formats only. In FAT32, it will record a new file when
the previous recording file reaches the maximum 2GB capacity, the maximun is 32GB for
FAT; in NTFS there is no 2GB per file limitation D200 will record as long as needed.
When HDD or USB storage is full, D200 stops recording and LED will go off.
D200 saves files in MPEG4 format. The resolution can be set at either 720p or 1080p for
capture. Please note that not all games/video files are produced at 1080p.
D200 will record approximately 1GB per 10mins at either 720p or l080p.
3. Setup by OSD (On Screen Display)
Press on the remote control to browse the menu settings
System Time: Set the time of D200 by year, month, day, hour and minute.
Schedule Recording: Allow you to preset up to 4 different recording schedules
Table des matières
Autres manuels TeVii Accessoires de jeux vidéo
Manuels Accessoires de jeux vidéo populaires d'autres marques
Sega
Sega Visual Memory Unit Manuel utilisateur
Datel
Datel Go-tcha Expedition Manuel utilisateur
TruGolf
TruGolf TruFlight 2 Manuel utilisateur
CH Products
CH Products CH PRO THROTTLE Manuel utilisateur
Thrustmaster
Thrustmaster T2PA Manuel utilisateur
Cube Controls
Cube Controls Mercedes-AMG - GT Edition SIM Wheel Manuel utilisateur
