Tescom ML100EX Manuel utilisateur

EXTERNAL

UPS RS232 PORT

MULTIPLEXER

(

ML100EX

)

USER MANUAL

1. GENERAL

Usually UPS devices has 1 serial communication port at some applications two serial connections to UPS

needed at these case ,ML100 multiplexer unit duplicates the UPS RS232 port from 1 serial port to 2 serial

ports. So the connection from remote panel to UPS and connection from PC to UPS is possible at the same

time.

2. TECHNICAL SPECIFICATIONS

UPS port baud rate 2400 baud/ps (fix)

UPS port parity none

UPS port stop bit 1

UPS port handshaking none

COM1 port baud rate 2400 baud/ps (fix)

COM1 port parity none

COM1 port stop bit 1

COM1 port handshaking none

COM1–UPS port isolation none

COM2 port baud rate 2400 baud/ps (fix)

COM2 port parity none

COM2 port stop bit 1

COM2 port handshaking none

COM1–UPS port isolation Optically isolated

AC Operating voltage 170-250 volts AC / 50 Hz

3. THE FRONT PANEL

Figure-1

On the front panel of the unit there are 3 serial RS232 ports these are

UPS PORT Must be connected to UPS serial port

COM1 Port 1 can be connected to a PC, Remote panel, SNMP adaptor, MODBUS adaptor

COM2 Port 2 can be connected to a PC, Remote panel, SNMP adaptor, MODBUS adaptor

On each serial port socket 2 indicator lamps are located .These lamps shows the port status if port is

receiving data from any device or UPS the RED lamp lits ,if port is transmitting data to UPS or any device the

green lamp lits.

If there is no data flow all lamps will be flash with interval. So the user can understand that the power is OK at

the input of device.

4. CONNECTION TO OTHER DEVICES

Com1 and com2 ports are optically isolated this method prevents cross current flows over 2 device which

connected to ML100 com1 and com2 ports

COM1 and COM2 ports pin layout is same with all our UPS models(not standart RS232).

Any device (like PC,REMOTE PANEL,SNMP ADAPTOR,MODBUS ADAPTOR) which is connected to UPS

can be connect to ML100 com1 or com2 ports.

Com1 and com2 port pinouts are same with any UPS serial port (not with this device’s UPS port)

5. APPLICATION

The following figure shows the possible connections for ML100 . To com1 or com2 serial port only 1 device

can be connected. At the figure the possible options are showned.

Figure-2

6. COMPATIBILITY TO DIFFERENT UPS MODELS

ML100EX device supports all our UPS models there is no compatibility problem.

7. CONNECTOR PIN LAYOUT

The UPS port connector

This connector is a standart PC side RS232 connector . To connect UPS port to UPS device please use

CC05 cable.

COM1 port connector

Description cable

To connect com1 port to a PC CC05

To connect com1 port to a SNMP CC05

To connect com1 port to a Remote Panel

COM2 port connector”

Description cable

To connect com2 port to a PC CC05

To connect com2 port to a SNMP CC05

To connect com2 port to a Remote Panel

Table des matières

Autres manuels Tescom UPS

Tescom

Tescom T3100P Manuel utilisateur

Tescom

Tescom DS310HB Manuel utilisateur

Tescom

Tescom DS330H Manuel utilisateur

Tescom

Tescom CL115D Series Manuel utilisateur

Tescom

Tescom TEOS 300RT Manuel utilisateur

Tescom

Tescom T-102 Manuel utilisateur

Tescom

Tescom DS340H Manuel utilisateur

Tescom

Tescom NEOLINE PRO 1kVAS Manuel utilisateur

Tescom

Tescom DS300SHP Series Manuel utilisateur

Tescom

Tescom DS3100 Manuel utilisateur

Tescom

Tescom XC Series Manuel utilisateur

Tescom

Tescom DS300SH Series Manuel utilisateur

Tescom

Tescom TEOS 400 FLEX RT Manuel utilisateur

Tescom

Tescom DS310HT Manuel utilisateur

Tescom

Tescom DS200 Series Manuel utilisateur

Tescom

Tescom T-200 Series Manuel utilisateur

Tescom

Tescom TEOS 200E PRO 10-20kVA Manuel utilisateur

Tescom

Tescom NEOLINE 6-20KVA UPS Manuel utilisateur

Tescom

Tescom DS3100T Manuel utilisateur

Tescom

Tescom DS310H Manuel utilisateur

Tescom

Tescom DS300S Series Manuel utilisateur

Tescom

Tescom DS POWER H Manuel utilisateur

Tescom

Tescom DS300A Series Manuel utilisateur

Tescom

Tescom CL110D Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur