TERMA MOA Manuel utilisateur
MOA
photo: chrome, straight cable
www.termaheat.pl page 1 of 3
20170913 WOŁOSIUK KACPER
Funcons and features:
Funconality
MOA oers 5 temperature sengs rang-
ing from 30°C to 60°C. It is equipped with
an electronic temperature sensor that
guarantees precise temperature control.
MOA displays the currently set tempera-
ture level and the status of the heang
cycle using illuminated diodes. The
heang element has a very low power
consumpon in a standby mode.
Dryer Funcon
This funcon allows the seng of
a higher heang power for two hours,
aer which the device returns to the
previous state.
Intelligent Building Systems
In the event of a power failure the MOA
remembers it’s previous sengs there-
fore making it suitable for connecon to
external mers and intelligent building
systems.
Safety
MOA is equipped with frost protecon
(ANTIFREEZE ). It also has double protec-
on against overheang of the radiator. It
displays warning indicators in case of mal-
funcon. It has an acve safety feature in
case of operaon in a dry radiator.
Design
MOA is supplied with a straight cable and
without a plug, it is also available with
a ‘cable masking’ as an oponal extra.
Colour
Available colours: white, silver, chrome
and black. Heang element can also be
oered in any RAL colour and Terma
special colours (including brass and gold)
subject to a minimum order of 100 pcs
per colour.
Specicaons:
Power supply: 230 V / 50 Hz
Device protecon class: Class I
Radiator connecon: G 1/2"
Ingress protecon [IP]: IPx5
MOA
Model Power
[W]
Packaging Colour Cable Type
WE MOA MOA 01 120 FFoil sleeve 916 White WStraight cable with plug
MAT MOA + T piece 02 200 TTube SMA Silver MStraight cable without plug with masking cover
03 300 CRO Chrome USpiral cable with plug
04 400 905 Black
06 600
08 800
10 1000
12 1200
Table conguraons:
Example of product code: WE MAT 04 T SMA W
Model code Packaging code
Element
power code
Colour or
nish code
Cable type and
plug code
design: Katarzyna Molicka and Michał Sowa
Code elements highlighted in blue
www.termaheat.pl page 2 of 3
20170913 WOŁOSIUK KACPER
66 L ± 5
G 1/2"
3955
48
(42 ÷ 77)
66 L ± 5
G 1/2"
3955
48
(42 ÷ 77)
Straight cable without plug with masking cover
Straight cable with plug
Spiral cable with plug
MOA
Power [W]
L [mm]
120
315
200
275
300
300
400
335
600
365
800
475
1000
565
1200
660
www.termaheat.pl page 3 of 3
20170913 WOŁOSIUK KACPER
PLEN DE FR ITCS SKRU
User Manual
Electric Heang Element
Návod na obsluhu — Topné těleso | Gebrauchsanweisung — Elektroheizpatrone |
Mode d’emploi — Kit résistance électrique | Manuale d'istruzioni — Elemento elerico
riscaldante | Instrukcja Obsługi — Grzałka elektryczna | Инструкция по применению
— Электронагреватель | Návod na obsluhu — Elektrické vykurovacie teleso
MEG · DRY · MOA ·
MOA IR · REG 2 · REG 3
3
EN
User Manual
Our products have been designed and manufactured in such a way to ensure
that all quality, functionality and aesthetic requirements are met. We would
like to congratulate you on the purchase of this great product and wish you
a pleasant experience with it.
Electric radiator
Guide to safe installation anduse.
1. Do not install the heater under an electrical socket point.
2. Your electric heater should be lled with a carefully measured amount of
liquid. In the case of loss of heating medium, or in any other case which
demands its supplementation, contact your supplier.
3. The device is not equipped with an external temperature controller *).
Do not use the device in a small room if unsupervised disabled or inca-
pacitated individuals are inside it. Only use the device if those individu-
als are under constant supervision.
*) Does not apply to selected models. Ask your supplier for details.
4User manual MEG, DRY, MOA, REG 2, REG 3
4. Electric heater is not a toy. Children under the age of 3 should not be al-
lowed within close proximity of the device without the supervision of an
adult.
Children aged 3 to 8 should only be allowed to operate the heater when
it has been properly installed and connected. The child must be under
adult supervision or have been trained to safely operate the device while
understanding the risks.
5. Note: Some parts of the radiator can be very hot and can cause burns. Pay
special attention to the presence of children or people with disabilities.
6. If the device is used as a clothes and towel dryer, ensure that the fabrics
drying on it have only been washed in water, avoiding contact with any
harsh chemicals.
7. To ensure the safety of very small children, install the electric dryer so
that the lowest tube is at least 600mm above the oor.
8. The device should only be installed by a qualied installer in accordance
with the applicable regulations regarding safety and all other regulations.
9. All installations to which the device is connected should comply with reg-
ulations applicable in the country of installation and use.
10. Extension leads or electric plug adapters should not be used in order to
supply power to the heater.
5
EN
11. While connecting the radiator to electric installation ensure that the cur-
cuit has a 30 mA residual-current circuit breaker and an appropriate over-
current circuit breaker. With the permanent installation (cable connec-
tion without plug) it is also mandatory to provide an omnipolar cut-o
switch with a minimum contact opening of 3 mm for disconnecting the
device on all poles.
12. The device version labelled PB can be installed in bathrooms in zone 1,
as dened by applicable law, subject to any additional regulations con-
cerning electrical installations in wet areas.
Other versions of the device can be installed in Zone 2 or beyond.
13. The device is recommended for use solely as described in the manual.
14. Ensure that the heater has been installed on a wall in accordance with
its installation manual.
15. Please forward this instruction manual to the end user.
6User manual MEG, DRY, MOA, REG 2, REG 3
Zone 1
Zone 2
7
EN
Electric Heating Element
Safety requirements — installation
1. Fitting and connection of the heating element should only be performed
by a qualied installer.
2. Connect the unit to a sound electrical installation (see the ratings on the
heater).
3. Switching on the heating element in the open air to test the device is per-
mitted for a maximum of 3seconds.
4. Never test a heating element that is already in- stalled. Do not turn the
heating element on in an empty radiator!
5. Ensure that the power cord does not touch the hot parts of the heating
element or radiator.
6. Before installing or removing the device, make sure it is disconnected
from the power source.
7. Do not open the device — any interference with internal components
will invalidate the warranty.
8. The heating element’s power output must not exceed the radiators pow-
er output for the parameters 75/65/20° C.
Autres manuels pour MOA
4
Table des matières
Autres manuels TERMA Chauffage électrique
