TERK Technologies TUNVR2 Manuel utilisateur
SETUP GUIDE
Check out setup videos at
www.TERK.com/Setup
HD DIGITAL TV TUNER
WITH
RECORDING
TUNVR2
2
WELCOME
Congratulations on your purchase of the Terk HD Digital TV Tuner with
Recording! This product combines an HDTV Tuner with Recording Capability
to let you get the most from your FREE local HD channels. This Setup Guide
takes you through the steps to get started.
What’s included:
• HD Television Tuner
• Power Adapter (for the tuner)
• Remote Control (to operate the tuner)
• HDMI Cable (to connect to your TV)
What’s NOT included:
• TV Antenna (to receive local TV stations)
• External USB Drive (to record programs or
timeshift what you’re watching)
Note: The tuner also offers composite video/
audio connections for TVs that don’t have an
HDMI input. If you want to use a composite
video/audio connection, you’ll need composite
video/audio cables, which are not included.
3
SETTING UP
1Connect the HD Digital TV Tuner
to an antenna.
Connect the coaxial cable from your TV antenna
to the ANTENNA IN jack on the back of the HD
Digital TV Tuner.
Note: For best results, we recommend Terk TV
antennas.
2Connect the HD Digital TV Tuner
to your TV, monitor, or projector.
Connect the included HDMI cable to the HDMI
jack on the back of the tuner. Connect the other
end to an available HDMI input on you HDTV,
monitor, or projector.
Note: If your TV doesn’t have an HDMI input, connect
audio/video cables (not included) to the VIDEO/R-L
jacks on the tuner. Then connect the other ends to
the corresponding jacks on your TV.
RF OUT VIDEO DC INR LRF IN
TV Antenna
HD Digital TV Tuner Back Panel
RF OUT VIDEO DC INRF IN R L
HDTV, Monitor, or Projector
HD Digital TV Tuner Back Panel
4
SETTING UP (continued)
(Optional) Pass through the antenna
signal to your HDTV.
If your HDTV has its own tuner, you can “pass through”
your antenna’s signal to it so that both the HD Digital
TV Tuner and your HDTV can use the same antenna.
(That means you can watch one channel on your TV
while the HD Digital TV Tuner records another.)
Connect a coaxial cable (not included) to the HD
Digital Tuner’s RF OUT jack. Connect the other end to
your HDTV’s antenna jack.
3
RF OUT VIDEO DC INR LRF IN
HDTV
TV Antenna
HD Digital TV Tuner
RF OUT
CH– CH+
USB
HDMI
CH– CH+
USB
TV
Switch to the correct
HDMI input on your
HDTV (the one you
connected to in step 2).
Switch to your HDTV’s TV
or antenna input/source.
To watch your HDTV while the HD Digital
TV Tuner records something else:
To watch the TV or recordings from
your HD Digital TV Tuner:
5
SETTING UP (continued)
Plug in the HD Digital TV Tuner.
Plug one end of the included AC adapter into
the DC IN jack on the back of the HD Digital
TV Tuner. Plug the other end into a working
AC outlet or surge protector.
4
Turn on your TV and make sure it’s on the correct input.
Press the power button for your TV, monitor, or projector (either on the remote that
came with it or on the device itself). Then press the button that changes input on this
device or its remote until you see the input you used for the tuner. For example, if you
connected the HDMI cable to the HDMI1 input on your TV, monitor, or projector, select
the HDMI1 input on your device.
6
RF OUT VIDEO DC INR LRF IN
HD Digital TV Tuner Back Panel
Install batteries in the tuner’s remote.
Open the battery compartment on the back of the remote. Then insert 2 AAA batteries
(not included) in the battery compartment, matching the batteries to the (+) and (–)
marks on the inside of the compartment.
5
6
SETTING UP (continued)
Turn on the HD Digital TV Tuner (if it’s not already on).
7
Press the button on the front of the tuner or
on the tuner’s remote to turn it on. The power
indicator on the front of the tuner lights up and
the TERK screen appears on your TV, monitor, or
projector.
Go through the Installation Guide to perform a
Channel Search.
8
The first time you turn it on, the tuner will take
you through an Installation Guide. Use the arrow
buttons on your remote to choose your preferred
language for the menus (OSD Language) and
your country.
Then highlight Channel Search and press OK to
start searching for channels in your area.
CH– CH+
USB
EXIT EXIT OK Confirm
Installation Guide
English
Country
Channel Search
USA
OSD Language
CH– CH+
USB
7
The tuner launches the auto search for channels. This
allows your tuner to program all of the broadcast
channels you receive into its channel memory. This
step could take up to 30 minutes. The Progress bar
shows how much of the search has been completed.
IMPORTANT: Make sure you have your antenna
connected to the tuner and pointed toward where
your broadcasts are coming from.
Once the tuner has completed the auto search, press
OK on the remote to see a list of the channels it found.
You can add individual channels later by using the
Manual Search or Auto Scan Add Channels (see page
24 for information—this does not delete current channel
list). You might need to do this if your broadcast
channels come from several different directions.
You can also mark some of the channels in the list as
your favorites using the Favorite Channels menu (see
page 22 for information).
SETTING UP (continued)
EXIT EXIT OK Confirm
All TV List
40-2 WHMB-D2
42-1 TBN
42-2 Hillsng
42-3 JUC/SOC
42-4 Enlace
42-5 SALSA
47-1 WBXI-CD
59-2 AntTV
59-1 WXIN-DT
EXIT EXIT MENU Skip
Channel Search
473.0MHz/6MHz
DTV: 003
001 WTHR-HD
002 COZI TV
003 Me-TV
Progress
8
SETTING UP (continued)
(Optional) Connect a USB drive to the tuner for recording.
9
Connect a USB drive to the USB port on the
tuner’s front panel.
Note: Not all USB drives are compatible
with this tuner. For best results, use USB 3.0
portable Hard Drives and Flash drives.
CH– CH+
USB
Press the PVR button on the remote. Use the
arrow buttons to highlight the PVR Configure
option. Then press OK to access the Record
Device options.
Note: Timeshift Size sets the size of the
memory allocated to the Timeshift mode.
This is a temporary memory for programed
watched using Timeshift but not recorded.
Formatting the drive will delete all files on
your USB drive.
PVR Configure
Record Device
Format
EXIT Return OK Confirm
EXIT EXIT OK Confirm
Record Device
C: (USB1)
Timeshift Size 1.0 GB
Disk
Media Type
Disk Total Space
Disk Free Space
FAT32
931.25 GB
897.55 GB
(Optional) Configure the USB drive for your preferences.
10
CH– CH+
USB
9
TOUR OF THE HD DIGITAL TV TUNER
Remote Control
MUTE / Mutes and unmutes the audio from the tuner.
POWER / Turns the tuner on or puts it in standby mode.
FAV Displays the Favorite Channel List (see page 22 for more information).
SUBTITLE Turns on subtitles (if available).
INFO Shows/hides program info. Press once to show program info. Press
twice to show detailed info with signal meter. While recording or watching
a recording, displays detailed record info.
CC Turns on closed captioning (if available) and selects from available CC
types.
0-9 Inputs numbers, including channels to watch.
RECALL Goes back to the previous channel.
DVR LIST Displays the list of DVR recordings on the USB device.
MENU Displays the tuner’s Main Menu.
EXIT Returns to the previous menu.
Arrows In the menu system or guides, moves cursor up/down or left/right.
OK Confirms your selection. Press twice for the Channel List.
LANG
REPEATTV/RADIOTIMESHIFTREC
DVR TIMERV-FORMATASPECT
PgDn PgUp
VOL CH
MENU
GUIDE
EXIT
GOTO
OK
FAV SUBTITLE INFO CC
RECALL
1 2 3
DVR LIST
456
7890
MUTE POWER
Continues on next page...
10
GUIDE Displays the tuner’s program guide and recording setup schedule.
GOTO Goes to a selected program time during playback of a recorded program (see page 19
for more information).
PgDn / PgUp Goes up or down one page in a multipage list (like the Guide or Recordings list).
VOL+/– Adjusts volume.
/ Scans in reverse or forward. Repeated presses select the scan speed (2X, 4X, 8X, 16X,
32X).
/ Goes to the next or previous file or recording.
CH+/– Changes channel.
/ Starts/pauses playback of a recording. While watching a program or when recording a
program, pressing pause starts Timeshift mode (see page 20 for more info).
Stops video playback or recording.
LANG Selects from the available audio modes.
REC Starts a DVR recording.
TIMESHIFT Goes into timeshift mode for live TV.
TV/RADIO Has no function with this tuner.
REPEAT Chooses a repeat playback mode (repeat program, repeat the folder, or play random
from folder).
ASPECT Changes the aspect ratio of currently displayed video.
V-FORMAT Selects the resolution of the tuner’s output.
DVR TIMER Enters Timer mode to schedule a program recording.
Table des matières
Autres manuels TERK Technologies Tuner TV
