TERK Technologies TUNVR1 Manuel utilisateur
SETUP GUIDE
Check out setup videos at
www.TERK.com/Setup
HD DIGITAL TV TUNER
WITH
RECORDING
TUNVR1
2
WELCOME
Congratulations on your purchase of the Terk HD Digital TV Tuner with
Recording! This product combines an HDTV Tuner with Recording Capability
to let you get the most from your FREE local HD channels. This Setup Guide
takes you through the steps to get started.
What’s included:
• HD Television Tuner
• Power Adapter (for the tuner)
• Remote Control (to operate the tuner)
• HDMI Cable (to connect to your TV)
What’s NOT included:
• TV Antenna (to receive local TV stations)
• External USB Drive (to record programs or
timeshift what you’re watching)
Note: The tuner also offers a composite
video/audio connection for TVs that don’t
have an HDMI input. If you want to use a
composite video/audio connection, you’ll
need composite video/audio cables, which
are not included.
3
SETTING UP
1Connect the HD Digital TV
Tuner to an antenna.
Connect the coaxial cable from your TV
antenna to the ANTENNA IN jack on the back
of the HD Digital TV Tuner.
Note: For best results, we recommend Terk TV
antennas.
2Connect the HD Digital TV
Tuner to your TV, monitor, or
projector.
Connect the included HDMI cable to the HDMI
jack on the back of the tuner. Connect the
other end to an available HDMI input on you
HDTV, monitor, or projector.
Note: If your TV doesn’t have an HDMI input,
connect audio/video cables (not included) to
the VIDEO and AUDIO jacks on the tuner. Then
connect the other ends to VIDEO and AUDIO
jacks on your TV.
TV Antenna
HD Digital TV Tuner Back Panel
HDTV, Monitor, or Projector
HD Digital TV Tuner Back Panel
4
SETTING UP (continued)
Plug in the HD Digital TV Tuner.
Plug one end of the included AC adapter into
the 5V DC 2A jack on the back of the HD
Digital TV Tuner. Plug the other end into a
working AC outlet or surge protector.
3
Turn on your TV and make sure it’s on the correct input.
Press the power button for your TV, monitor, or projector (either on the remote that
came with it or on the device itself). Then press the button that changes input on this
device or its remote until you see the input you used for the tuner. For example, if you
connected the HDMI cable to the HDMI1 input on your TV, monitor, or projector, select
the HDMI1 input on your device.
5
HD Digital TV Tuner Back Panel
Install batteries in the tuner’s remote.
Open the battery compartment on the back of the remote. Then insert 2 AAA batteries
(not included) in the battery compartment, matching the batteries to the (+) and (–)
marks on the inside of the compartment.
4
5
SETTING UP (continued)
Turn on the HD Digital TV Tuner (if it’s not already on).
6
Press the POWER button on the front of the
tuner or on the tuner’s remote to turn it on. The
power indicator on the front of the tuner lights
up and the TERK screen appears on your TV,
monitor, or projector.
Go through the Installation Guide to perform a
Channel Search.
7
The first time you turn it on, the tuner will take
you through an Installation Guide. Use the arrow
buttons on your remote to choose your preferred
language for the menus (OSD Language) and
your country.
Then highlight Channel Search and press OK to
start searching for channels in your area.
EXIT EXIT OK Confirm
Installation Guide
English
Country
Channel Search
USA
OSD Language
Continues on next page...
6
The tuner launches the auto search for channels. This
allows your tuner to program all of the broadcast
channels you receive into its channel memory. This
step could take up to 30 minutes. The Progress bar
shows how much of the search has been completed.
IMPORTANT: Make sure you have your antenna
connected to the tuner and pointed toward where
your broadcasts are coming from.
Once the tuner has completed the auto search, press
OK on the remote to see a list of the channels it found.
You can add individual channels later by using the
Manual Search or Auto Scan Add Channels (see page
23 for information—this does not delete current channel
list). You might need to do this if your broadcast
channels come from several different directions.
You can also mark some of the channels in the list as
your favorites using the Favorite Channels menu (see
page 21 for information).
SETTING UP (continued)
EXIT EXIT OK Confirm
All TV List
40-2 WHMB-D2
42-1 TBN
42-2 Hillsng
42-3 JUC/SOC
42-4 Enlace
42-5 SALSA
47-1 WBXI-CD
59-2 AntTV
59-1 WXIN-DT
EXIT EXIT MENU Skip
Channel Search
473.0MHz/6MHz
DTV: 003
001 WTHR-HD
002 COZI TV
003 Me-TV
Progress
Go through the Installation Guide to perform a
Channel Search (continued).
7
7
SETTING UP (continued)
(Optional) Connect a USB drive to the tuner for recording.
8
Connect a USB drive to the USB port on the
tuner’s front panel.
Note: Not all USB drives are compatible
with this tuner. For best results, use USB 3.0
portable Hard Drives and Flash drives.
Press the PVR button on the remote. Use the
arrow buttons to highlight the PVR Configure
option. Then press OK to access the Record
Device options.
Note: Timeshift Size sets the size of the
memory allocated to the Timeshift mode.
This is a temporary memory for programed
watched using Timeshift but not recorded.
Formatting the drive will delete all files on
your USB drive.
PVR Configure
Record Device
Format
EXIT Return OK Confirm
EXIT EXIT OK Confirm
Record Device
C: (USB1)
Timeshift Size 1.0 GB
Disk
Media Type
Disk Total Space
Disk Free Space
FAT32
931.25 GB
897.55 GB
(Optional) Configure the USB drive for your preferences.
9
8
TOUR OF THE HD DIGITAL TV TUNER
Remote Control
STANDBY / Turns the tuner on or puts it in standby mode.
MUTE / Mutes and unmutes the audio from the tuner.
AUDIO Selects from the available audio modes.
FAV Displays the Favorite Channel List (see page 21 for more information).
CC Turns on closed captioning (if available) and selects from available CC
types.
HDMI Selects the resolution of the tuner’s output.
GOTO Goes to a selected program time during playback of a recorded
program (see page 18 for more information).
RECALL Goes back to the previous channel.
MENU Displays the tuner’s Main Menu.
EPG Displays the tuner’s Electronic Program Guide and recording setup
schedule.
INFO Shows/hides program info. Press once to show program info. Press
twice to show detailed info with signal meter. While recording or watching
a recording, displays detailed record info.
EXIT Returns to the previous menu.
9
TOUR OF THE HD DIGITAL TV TUNER (continued)
Arrows, CH+/–, VOL+/– In the menu system or guides, moves cursor up/down or left/right.
Outside of the menus and guides, changes channel or adjusts volume.
OK Confirms your selection. Press twice for the Channel List.
0-9 Inputs numbers, including channels to watch.
— Selects a digital sub channel (for example, 13.2).
PVR Used to format and setup a USB device for recording.
PLAY / PAUSE Starts/pauses playback of a recording. While watching a program or when
recording a program, pressing pause starts Timeshift mode (see page 19 for more info).
STOP Stops video playback or recording.
REV / FWD Scans in reverse or forward. Repeated presses select the scan speed (2X, 4X, 8X,
16X, 32X).
PREV / NEXT Goes to the next or previous file or recording.
HOLD In PVR mode, selects between in preview or full-screen video playback.
REPEAT Chooses a repeat playback mode (repeat program, repeat the folder, or play random
from folder).
PVR LIST Displays the list of PVR recordings on the USB device.
TIMER Enters Timer mode to schedule a program recording.
10
TOUR OF THE HD DIGITAL TV TUNER (continued)
HD Digital TV Tuner
Front Panel
ANTENNA IN jack Connects to a TV antenna
to receive local broadcasts.
HDMI jack Connects to your TV, monitor, or
projector using the HDMI cable (included).
AUDIO L/R and VIDEO jacks Connects
to your TV, monitor, or projector using a
composite video and stereo audio cables
(not included).
5V DC 2A jack Connects to the included DC
power adapter to power the tuner.
USB jack Connects to a USB drive for
recording or timeshifting programs.
Power indicator Shows when the tuner is on
(green) or in standby mode (red).
Recording indicator Flashes red when the
tuner is recording and the record clock is on-
screen.
CH+/– buttons Goes up and down through
the tuner’s channel list.
POWER button Turns the tuner on or puts it
in standby mode.
Power indicator Recording indicator
Back Panel
Table des matières
Autres manuels TERK Technologies Tuner TV
