10
11
IMPORTANT INFORMATION
• The gateway should not be sterilized.
• The gateway should not be used in an oxygen rich
environment.
• The gateway should not be used in presence of
ammable anaesthetics.
• Do not attempt to repair the gateway by yourself.
• Only use the power supply provided with the gateway.
• If the gateway connection cannot be established
it will not be able to send information and work as
expected. In such a case, please revert to a manual
process for checking the incontinence product. Check
the Troubleshooting section in this guide and if needed,
contact TENA SmartCare support.
• Do not open or modify the gateway. Doing so will result
in a void of warranty and can result in an unidentied
risk to patient, operator or third party.
• Changes or modications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
• Save this user manual for future reference.
• If any changes to the installation are necessary, please
contact TENA SmartCare support.
• Devices shown are not actual size.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the in-
structions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
WARNINGS IMPORTANT INFORMATION
