Tempest Breeze 58.025 Manuel utilisateur

Breeze User Manual 1

User Manual

Breeze

Revision 01.1

September 2017

Breeze User Manual 2

Table of Contents

Introduction ................................................................................................................................................................................................ 3

IMPORTANT: Safety Advisories.............................................................................................................................................................. 3

Installation................................................................................................................................................................................................... 4

Dimensions, Rigging Points, and Maximum Projector Dimensions/Power ......................................................................................... 4

Air Clearance....................................................................................................................................................................................... 5

Snow Clearance .................................................................................................................................................................................. 5

Operating Temperature Range.......................................................................................................................................................... 5

Mounting Bolts ................................................................................................................................................................................... 6

Hanging a Breeze Enclosure............................................................................................................................................................... 6

Wiring the Enclosure .................................................................................................................................................................................. 7

Power Wiring .......................................................................................................................................................................................... 7

SAFETY NOTICE: .................................................................................................................................................................................. 7

Electrical Standards ............................................................................................................................................................................ 7

Wiring Access...................................................................................................................................................................................... 8

One or Two Power Circuits? .............................................................................................................................................................. 9

3.4 Connect AC Wiring to MiniDEC Controller............................................................................................................................... 10

Mounting the Projector............................................................................................................................................................................ 11

Ceiling or Tabletop................................................................................................................................................................................ 11

Mounting and Aligning ......................................................................................................................................................................... 11

Connecting Equipment......................................................................................................................................................................... 11

Routine Maintenance ............................................................................................................................................................................... 12

Clean Port Glass................................................................................................................................................................................ 12

Check Filter ....................................................................................................................................................................................... 12

Clean Filter........................................................................................................................................................................................ 12

Replacement Filters.......................................................................................................................................................................... 12

To Remove Filter............................................................................................................................................................................... 12

After Sales Support............................................................................................................................................................................... 12

Troubleshooting........................................................................................................................................................................................ 13

Warranty ................................................................................................................................................................................................... 14

Breeze User Manual 3

Introduction

Thank you for purchasing a Tempest enclosure! We have worked hard to provide you with the very best

product available for its purpose, and we shall continue to do everything possible to ensure that it works

well for you for many years to come.

Please read this manual before starting work!

In the event of difficulty, please contact your Tempest reseller or Tempest direct:

in[email protected]

+1 818 787 8984

We will do everything we can to help you get the very best results from your Tempest enclosure.

IMPORTANT: Safety Advisories

All installation and rigging work done must where applicable be designed and built in accordance

with norms and standards of the local authority having jurisdiction of the installation site. It is the

responsibility of the installer to obtain such approvals as may be required to achieve full

compliance.

All electrical work must be carried out by a suitably licensed electrical contractor in full

compliance with local electrical standards.

Lifting: some enclosures and the equipment inside them may be heavy. Use properly rated lifting

equipment where appropriate and never attempt to carry out work with fewer than the number

of workers needed to lift safely.

It is the responsibility of the installer to ensure that all local building, safety and electrical codes

are strictly adhered to in the installation of this enclosure. Tempest Lighting, Inc., its employees

and agents are in no way responsible for damage arising from failure to follow either the

instructions in this manual or building, safety and electrical codes prevailing at the installation

location.

Do not attempt to install or operate the enclosure before fully reading and understanding this

manual

Never allow anyone who has not read this manual to open the enclosure or perform maintenance

on the projector within.

Never leave the enclosure unattended when open.

Always make sure all bolts and latches are tight and safety locks are in place after performing any

form of maintenance on the unit.

Do not open any electrical boxes until power has been shut off to all supply lines to the enclosure

(including the one powering the projector).

Do not open the enclosure in wet weather.

Breeze User Manual 4

Installation

Dimensions, Rigging Points, and Maximum Projector Dimensions/Power

Model

Format

Length

Width

Height

Weight

Projector Max:

Size (LWH) *

Projector

Max Power

58.025

Landscape

559

22in

478

18.8in

241

9.5in

445

17.5in

368

14.5in

16kg

35lb

410x410x150

16x16x6in

500W

52.050

Landscape

762

30in

595

23.5in

318

12.5in

648

25.5in

483

19in

21kg

45lb

610x521x229

24x20.5x9in

800W

52.100

Landscape

864

34in

702

27.6in

346

13.6in

749

29.5in

588

2.16in

30kg

66lb

695x595x275

28x24.5x10in

1,000W

52.150

Landscape

1041

41in

702

27.6in

397

15.6

927

36.5in

588

2.16in

41kg

90lb

890x622x254

35x24.5x12in

1,600W

Note: Be sure to allow for the length of the lens and for connectors, cables and

cable bend radii when calculating dimensions

Breeze User Manual 5

Air Clearance

Observe the minimum clearances shown around your

enclosure

Snow Clearance

In areas where snow is likely, make sure the base of the

enclosure is at least 24” [60cm] above highest potential

snow drift level.

Operating Temperature Range

Breeze may be used safely in locations where minimum

temperatures do not fall below 0°C [32°F].

Maximum ambient temperatures when the projector is

running (usually after dark) should not be higher than 2-

3°C below the projector’s stated maximum

environmental limit. So, for a projector with a 45°C limit,

ambients up to around 42° are ok. During daytime the

enclosure fan will run automatically if the internal

temperature exceeds 35°C.

If these conditions are not met, Breeze may not be the

right enclosure for your project –consider upgrading to a

Tempest Blizzard enclosure.

Allow 1m/3ft for access on

at least one side

75mm/3in

60cm/24in

Breeze User Manual 6

Mounting Bolts

Each Enclosure must be mounted with FOUR points.

All mountings must be made using the four M8

threaded holes on the bottom of the enclosure.

Use a 5mm hex key to secure the M8 socket cap

screws provided.

If the screws provided are not long enough to reach

through your structure, use any stainless steel M8-

1.25mm screw of sufficient length.

Tempest Lighting recommends the use of stainless

steel mounting hardware.

Make sure the inlet filter has at least 75mm/3in

clearance below.

IMPORTANT SAFETY NOTICES

Installer must ensure that all mounting points are secure

and conform to local safety regulations. Tempest Lighting

Inc. accepts no responsibility for damage or injury arising

from inappropriate or unsafe installation.

Hanging a Breeze Enclosure

If you need to hang your Breeze enclosure –for example

below a ceiling or soffit, use the four hanging adapter

plates supplied, along with M12 or ½” threaded drop

rods, as shown here:

5mm

Hanging adapter Plates

(included)

Drop rods (not included)

Breeze User Manual 7

Wiring the Enclosure

Power Wiring

SAFETY NOTICE:

All electrical wiring and termination MUST be carried out by

a suitably qualified and/or licensed professional, in

accordance with electrical and safety norms applicable in the

jurisdiction of the installation. Tempest, its employees and

representatives will not be liable for any damage arising

from failure to observe this requirement.

Electrical Standards

Important:

Fans and electronics are rated 115V or 230V, dependent on

electrical standard.

Enclosure model numbers ending .US are for use in countries

using US and Japanese style electrical systems:

100-120VAC 50/60Hz

Enclosure model numbers ending .IN are for use in countries

using European style electrical systems:

200-230VAC 50/60Hz

Remove the cover fixing screws, using a 4mm Hex Key.

Lift off the top cover.

4mm

Breeze User Manual 8

Wiring Access

Remove the MiniDEC Controller cover, by releasing the three

M4 thumb nuts.

Ground/Earth Terminal

Fan Terminal

AC Conduit Entry

Projector Outlet*

AC Terminal Block

* Your Breeze enclosure comes with a

rewirable C14 plug to fit this power

outlet.

You MUST connect projector power to

the C13 outlet. If this is not done, the

controller will not sense projector

function and the projector will quickly

overheat.

MiniDEC

Controller Cover

M4 Thumb nuts

Breeze User Manual 9

One or Two Power Circuits?

Tempest enclosures may be wired on single or double circuit

supplies. On a single feed, both enclosure and projector are

permanently on. With a split (double) feed supply, you can

switch off the projector when not in use, while the enclosure

continues to protect it 24/7.

Tip: most people use single feed.

Single Feed

Enclosure and projector are permanently on.

Enclosure and Projector must be rated for the

same voltage.

Supply must be rated for projector current plus

100 watts.

Supply must be permanently ON.

Split feed

Enclosure power must be permanently ON.

Projector power may be switched off.

Enclosure power must be rated for 100 watts.

Projector power must be rated for the projector

(see projector manual).

Projector and enclosure power must be same

voltage.

Single Feed

Split Feed

Breeze User Manual 10

3.4 Connect AC Wiring to MiniDEC Controller

Single Feed Operation

Note: European wire colors shown for illustration only.

Split Feed Operation

Single Feed Wiring

Feed the controller with a single maintained supply. The

enclosure should be powered 24/7. The projector must

be switched off when needed using the projector control

system.

Breeze ships configured for single feed wiring operation.

Split Feed Wiring

You may switch off the supply to the projector without

interfering with the cooling fan operation. Connect feeder

wires as shown, AND CUT THE COPPER LINKS ON THE

MiniDEC BOARD IN TWO PLACES, AS SHOWN. Fan circuit

should be maintained 24/7.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tempest Projecteur

Tempest

Tempest Tacit G4 Manuel utilisateur

Tempest

Tempest Tacit 8 56.050L Manuel utilisateur

Tempest

Tempest Breeze 52.050 Manuel utilisateur

Tempest

Tempest LIZA 6425H Manuel utilisateur

Tempest

Tempest Cyclone G4 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur