Tempest Typhoon 54.100 Manuel utilisateur

Typhoon User Manual 1

User Manual

Typhoon

Revision 02.1

December 2020

 
 
Typhoon User Manual 2 
 
Table of Contents 
Introduction ................................................................................................................................................................................................ 5 
IMPORTANT: Safety Advisories.............................................................................................................................................................. 5 
Installation................................................................................................................................................................................................... 6 
Dimensions and Rigging Points.............................................................................................................................................................. 6 
Air Clearance....................................................................................................................................................................................... 7 
Snow Clearance .................................................................................................................................................................................. 7 
Mounting Bolts and Accessories............................................................................................................................................................ 7 
Rigging Options –Grab Handles ........................................................................................................................................................ 8 
Rigging Options –Unistrut Kit............................................................................................................................................................ 8 
Rigging Options –Truss Kit................................................................................................................................................................. 8 
Rigging Options –Stacking Kit............................................................................................................................................................ 9 
Rigging Options –Drop Arms............................................................................................................................................................. 9 
Mounting the Projector............................................................................................................................................................................10 
Using Typhoon enclosures in Portrait mode...........................................................................................................................................11 
Check your Projector............................................................................................................................................................................11 
Outdoor Use in Portrait Mode.............................................................................................................................................................11 
Rotate Fan and Connector Panel..................................................................................................................................................... 11 
Connecting the Enclosure ........................................................................................................................................................................12 
Power Inlet Connector .....................................................................................................................................................................12 
Signal Connectors and Cables.......................................................................................................................................................... 12 
Rubber Connector Flap .................................................................................................................................................................... 12 
Remote Monitoring Connections ........................................................................................................................................................13 
Remote Monitoring Options............................................................................................................................................................ 13 
Remote Monitoring Connectors...................................................................................................................................................... 13 
Digital Enclosure Control.......................................................................................................................................................................... 14 
Schematic.............................................................................................................................................................................................. 14 
DEC4 Main Functions ...........................................................................................................................................................................15 
Firmware Revision............................................................................................................................................................................15 
Factory Settings –Data Modes............................................................................................................................................................ 15 
Hardware Indicators & Fuses...............................................................................................................................................................16 
............................................................................................................................................................................................................... 16 
Operating Modes..................................................................................................................................................................................17 
RDM Only Monitor (Factory Default) ..............................................................................................................................................17 
RDM+DMX Control...........................................................................................................................................................................17 
RDM+DMX Service ........................................................................................................................................................................... 17 
DEC4 Control Parameters .................................................................................................................................................................... 18 
Control Interface ..............................................................................................................................................................................19 
User Interface LCD Display...............................................................................................................................................................20 

 
 
Typhoon User Manual 3 
 
Control Interface Operation ............................................................................................................................................................20 
Control Menu........................................................................................................................................................................................ 21 
Set Data Options...............................................................................................................................................................................21 
Set Temp Units ................................................................................................................................................................................. 22 
Set Temp Ranges ..............................................................................................................................................................................22 
Set Max Humidity .............................................................................................................................................................................22 
Set Lamp On Point............................................................................................................................................................................22 
Reset Lamp Hours.............................................................................................................................................................................22 
Set Fan Function...............................................................................................................................................................................23 
Status Display.................................................................................................................................................................................... 23 
Safe Mode............................................................................................................................................................................................. 24 
Safe Mode –What to do:................................................................................................................................................................. 24 
DEC4 Firmware Updates .......................................................................................................................................................................... 26 
Indirect Firmware Updates ..................................................................................................................................................................26 
Requirements ................................................................................................................................................................................... 26 
Installation Procedure......................................................................................................................................................................26 
Routine Maintenance............................................................................................................................................................................... 31 
Clean Port Glass................................................................................................................................................................................ 31 
Check Filter ....................................................................................................................................................................................... 31 
Check Temperature/Humidity Sensor.............................................................................................................................................32 
For After Sales Support ....................................................................................................................................................................32 
Troubleshooting........................................................................................................................................................................................33 
Warranty ...................................................................................................................................................................................................35 
Appendix –TEMP Protocol.......................................................................................................................................................................36 
Physical Layer........................................................................................................................................................................................36 
Developer’s Guide ................................................................................................................................................................................ 36 
 
 
 
 
 
 

Typhoon User Manual 4

CERTIFICATE AND DECLARATION OF CONFORMITY

FOR CE MARKING

Tempest Lighting, Inc.

11845 Wicks Street, Sun Valley, CA 91352, USA

t: +1 818 787 8984 f: +1 818 252 7101 e: info@tempest.biz

www.tempest.biz

Tempest Lighting, Inc. declares that their

Projector Enclosure Series 54.xxx.xx

complies with the Essential Requirements of the following EU Directives:

Low Voltage Directive 2006/95/EC Test Report G4.51.LVD

Electromagnetic Compatibility Directive 2004/108/EC Test Report G4.51.EMC

and further conforms with the following EU Harmonized Standards:

EN 60065 : 2002 Test Report 60065.G4.51.01

EN 60529:2001-2002 Test Report 60529.G4.51.02

EN 61000-6-3:2007+A1:2011 Test Report 61000.G4.51.03

EN61000-6-1:2007 Test Report 61000.G4.51.03

EN55015:2006+A2:2009 Test Report 61000.G4.51.03

Dated: 1st July 2016

Position of signatory: President

Name of Signatory: Tim Burnham

Signed below:

on behalf of Tempest Lighting, Inc.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Typhoon User Manual 5

Introduction

Thank you for purchasing a Tempest enclosure! We have worked hard to provide you with the very best

product available for its purpose, and we shall continue to do everything possible to ensure that it works well

for you for many years to come.

Please read this manual before starting work!

In the event of difficulty, please contact your Tempest reseller or Tempest direct:

[email protected]

+1 818 787 8984

We will do everything we can to help you get the very best results from your Tempest enclosure.

IMPORTANT: Safety Advisories

•All installation and rigging work done must where applicable be designed and built in accordance

with norms and standards of the local authority having jurisdiction of the installation site. It is the

responsibility of the installer to obtain such approvals as may be required to achieve full

compliance.

•All electrical work must be carried out by a suitably licensed electrical contractor in full compliance

with local electrical standards.

•Lifting: some enclosures and the equipment inside them may be heavy. Use properly rated lifting

equipment where appropriate and never attempt to carry out work with fewer than the number of

workers needed to lift safely.

•It is the responsibility of the installer to ensure that all local building, safety and electrical codes are

strictly adhered to in the installation of this enclosure. Tempest Lighting, Inc., its employees and

agents are in no way responsible for damage arising from failure to follow either the instructions in

this manual or building, safety and electrical codes prevailing at the installation location.

•Do not attempt to install or operate the enclosure before fully reading and understanding this

manual

•Never allow anyone who has not read this manual to open the enclosure or perform maintenance

on the projector within.

•Never leave the enclosure unattended when open.

•Always make sure all bolts and latches are tight and safety locks are in place after performing any

form of maintenance on the unit.

•Do not open any electrical boxes until power has been shut off to all supply lines to the enclosure

(including the one powering the projector).

•Do not open the enclosure in wet weather.

Typhoon User Manual 6

Installation

Dimensions and Rigging Points

*Enclosure weight, no options or accessories

Typhoon A in A mm B in B mm C in Cmm D in D mm E in E mm F in F mm W lb * W kg *

54.100 34 864 30 762 15 381 32 813 26 660 13 330 85 39

54.150 42 1067 32 813 18 445 40 1016 28 711 16 394 106 48

54.210 51 1295 32 813 22 559 49 1245 28 711 20 508 177 80

54.250 51 1295 37 940 24 610 49 1245 33 838 22 559 223 101

54.305 51 1295 34 864 24 610 49 1245 30 762 22 559 205 93

54.310 59 1499 34 864 25 635 57 1448 30 762 23 584 247 112

54.320 67 1702 37 940 25 635 65 1651 33 838 23 584 305 139

Rigging Points:

Six M12-1.75 x 40mm threaded

holes top and bottom, left and

right sides.

Note: M12x40 stainless steel bolts

Supplied.

Note: Typhoon 100 –four rigging

points top, left and right sides, six

on base.

Typhoon User Manual 7

Air Clearance

Observe the minimum clearances shown around your

enclosure

Snow Clearance

In areas where snow is likely, make sure the base of the

enclosure is at least 24” [60cm] above highest potential snow

drift level.

Mounting Bolts and Accessories

Note: In most cases Typhoon enclosures will be installed with

the rigging options shown below.

All the rigging kits are installed using these mounting bolts.

•Each Enclosure must be mounted with SIX points (4 for

Typhoon 100).

•All mountings must be made using the M12 threaded

holes on the enclosure.

•Use an 8mm hex key to secure the M12 socket cap

screws provided.

•Tempest recommends the use of stainless steel

mounting hardware.

•Make sure the air inlet has at least 75mm/3in clearance.

IMPORTANT SAFETY NOTICE

Installer must ensure that all mounting points are secure and

conform to local safety regulations. Tempest Lighting Inc.

accepts no responsibility for damage or injury arising from

inappropriate or unsafe installation.

60cm/24in

8mm

M12-1.75 bolts

Use 8mm hex key

Sealing Washer –

important for outdoor use

Typhoon User Manual 8

Rigging Options –Grab Handles

Grab handles make it much easier to carry and install the

enclosure at the job site.

Handles install to the base of the enclosure for landscape

operation, using the M12 bolts provided. For portrait, attach

the handles to the side rigging points.

Grab handles may be used in conjunction with any of the

available Typhoon rigging accessories.

54.GH.100 Typhoon 100 Pair of Grab Handles

54.GH.150 Typhoon 150 Pair of Grab Handles

54.GH.210 Typhoon 210 Pair of Grab Handles

54.GH.250 Typhoon 250 Pair of Grab Handles

54.GH.310 Typhoon 310 Pair of Grab Handles

54.GH.320 Typhoon 320 Pair of Grab Handles

Rigging Options –Unistrut Kit

If mounting positions for the corner bolts are not convenient,

use the Unistrut Kit to add two Unistrut rails and Unistrut

spring nuts.

Using the spring nuts provided, the enclosure may now be

attached at any point along the Unistrut rails.

54.UR.100 Typhoon 100 Pair of Unistrut Rails

54.UR.150 Typhoon 150 Pair of Unistrut Rails

54.UR.210 Typhoon 210 Pair of Unistrut Rails

54.UR.250 Typhoon 250 Pair of Unistrut Rails

54.UR.310 Typhoon 310 Pair of Unistrut Rails

54.UR.320 Typhoon 320 Pair of Unistrut Rails

Rigging Options –Truss Kit

Use the Truss Hanger kit to hang any Typhoon enclosure from

a truss up to 24in/600mm.

54.TR.100 Truss Kit, Typhoon 100

54.TR.150 Truss Kit, Typhoon 150

54.TR.210 Truss Kit, Typhoon 210

54.TR.250 Truss Kit, Typhoon 250

54.TR.310 Truss Kit, Typhoon 310

54.TR.320 Truss Kit, Typhoon 320

Unistrut Rails may

be mounted above

or below

Max Ø2in [50]

Typhoon User Manual 9

Rigging Options –Stacking Kit

Typhoon may be stacked up to three units high, using the

51.SK stacking Kit. You will need the total number of Typhoons

to be stacked, minus one stacking kit(s).

Note: Typhoons must be of the same model to stack in this

way.

51.SK Stacking Kit (set of four, for one enclosure)

Rigging Options –Drop Arms

Use a pair of drop arms to rig a stack of Typhoons at different

tilt angles, up to 45°.

The drop arms install to the stacking kit legs using the stacking

kit clevis pins.

Important: Stacking kit legs must be installed facing forwards

for use with drop arms.

Note: Drop Arms require the use of a 51.SK Stacking Kit.

54.DA Pair of Typhoon Drop Arms

Attach male stacking leg

to base of top enclosure

with M12 Bolt supplied

Attach female stacking

leg to top of lower

enclosure with M12 Bolt

supplied

Join enclosures together

with clevis pins supplied

Typhoon User Manual 10

Mounting the Projector

Typhoon enclosures come with a projector mounting plate, customized for each projector type to be used.

The projector mounts to the plate using either the ceiling mount threaded holes in the projector plate, or by removing the

projector feet and replacing with appropriate screws (usually M10 or M12). This varies depending on the projector type.

1. Remove the projector tray from the Typhoon enclosure

2. Remove projector feet

3. Mount projector to plate, using the mounting holes and

screws provided (this will differ by projector type)

IMPORTANT:

Use either all four projector feet sockets or all available

ceiling mount threaded holes, especially for portrait

operation.

NOTE:

You may transport the projector inside the Typhoon

enclosure, provided the enclosure is suitably protected in a

road case or other vibration-absorbing method.

NOTE: You may specify multiple projector types when

ordering, and Tempest will provide mounting holes for each

type specified, based on projector manufacturer drawings.

4. Mount the projector/tray assembly in the enclosure

5. Adjust position front-back –it is usually best to have the

lens front close to the port glass, both for projection and

for air circulation.

6. Fix tray to projector beams, using the M8 screws

provided. For larger projectors, use at least three screws

on each side, especially for portrait operation.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tempest Enceinte

Tempest

Tempest Cyclone 55.210L Manuel utilisateur

Tempest

Tempest Oasis Manuel utilisateur

Tempest

Tempest Monsoon G4 Manuel utilisateur

Tempest

Tempest Thunder 6600 Manuel utilisateur

Tempest

Tempest Whispr G4 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur