Teltonika TRB140 Manuel utilisateur

https://wiki.teltonika-networks.com/view/TRB140_Device_Recovery_Options

TRB140 Device Recovery Options

Main Page > TRB Gateways > TRB140 > TRB140 Manual > TRB140 Device Recovery Options

Contents

1 Summary

2 Default login information

2.1 Devices with random password

3 Factory reset

3.1 Reset Button

3.2 WebUI

3.3 Command line

4 RMA

Summary

This chapter is an overview on various recovery options for a TRB140 device.

Default login information

Using recovery methods resets the device's configuration to its default state. Therefore, you will

need to use the default authentication info in order to login to the device. The default login

information for TRB140 is provided below:

Default Address (LAN IP): 192.168.2.1

Default Username: admin

Default Password: admin01 or random generated password*

Devices with random password

* Certain devices or batches of a device may have a generated password out of the box, instead of

admin01. For TRB140 devices, batch from when unique passwords are used is 59

You can find the batch of your device on the Product Labels sticker.

Factory reset

A factory reset returns the device back to its default factory settings, i.e., it deletes all custom

configurations. Below you will find various methods of performing a factory reset on TRB140.

Additional note: SIM PIN on the main SIM card is the only user parameter that is kept after a

factory reset.

Reset Button

The reset button is located on the {{{panel}}} of the device:

The reset button has two functions:

Reboot the device. If the reset button is pressed for up to 4 seconds, the device will reboot.

Start of the reboot will be indicated by the flashing of all 5 signal strength LEDs together with

the green connection status LED.

Factory reset. If the reset button is pressed for at least 5 seconds (by default), the device will

perform a factory reset and reboot.

NOTE: the default button hold time value (5 seconds) can be changed in the gateway WebUI,

from the System → Administration → General page.

WebUI

You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to

the Backup section found under the System tab (System → Backup → Restore default settings).

In the very bottom of the page there's a Restore button that performs a factory reset on click:

Command line

You can perform a factory reset via command line by executing the firstboot command. After this

you will be asked to confirm the reset. If you're sure, type the letter y and press "Enter" or type the

letter n if you wish to cancel the reset.

If you agreed to perform a factory reset, next type in reboot and press "Enter". The router will be

reset to it's factory settings and rebooted. The entire sequence of events should look like this:

For firmwares TRB14X_R_00.02.04.1 and newer:

root@Teltonika-TRB140:~# firstboot

This will erase all settings and remove any installed packages. Are you sure?

[N/y]

/dev/mtdblock5 is mounted as /overlay, only erasing files

root@Teltonika-TRB140:~# reboot

For firmwares TRB14X_R_00.02.03.2 and lower:

root@TRB140:~# factory_restore

Are you sure (y/n)? y

You can find more information on the command line interface (CLI) here.

RMA

If conventional recovery methods do not help, you may need to send the device to warranty for

repair. The warranty process is described here.

Table des matières

Autres manuels Teltonika Porte

Teltonika

Teltonika TRB255 Manuel utilisateur

Teltonika

Teltonika RUT950 Manuel utilisateur

Teltonika

Teltonika TRB140 Manuel utilisateur

Teltonika

Teltonika TRB145 Mode d’emploi

Teltonika

Teltonika TRB141 Manuel utilisateur

Teltonika

Teltonika TRB141 Manuel utilisateur

Teltonika

Teltonika QSG TRB500 Manuel utilisateur

Teltonika

Teltonika TRB140 Manuel utilisateur

Teltonika

Teltonika TRB142 Manuel utilisateur

Teltonika

Teltonika TRB245 Manuel utilisateur

Teltonika

Teltonika TRB141 Manuel utilisateur

Teltonika

Teltonika Voice Fax Gateway Manuel utilisateur

Teltonika

Teltonika TVF20 Series Manuel utilisateur

Teltonika

Teltonika TRB145 Manuel utilisateur

Teltonika

Teltonika TRB255 Manuel utilisateur

Teltonika

Teltonika RUT240 Manuel utilisateur

Teltonika

Teltonika TRB245 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur