Notes to each parametres:
11 – 19 When you programm some prefixes the Mini Gate
allows outgoing calls starts by those prefixes only. The
others will get busy tone. When memories will be
empty the calling wont be restricted (default). Memory
of prefixes can content 1 digit only. If you insert 1 digit
only the Mini Gate will check first position only.
Rewriting of memory – by storing of new fix-
numbers are old fix-numbers erased.
Erasing of memory - Memory you will erase by
storing of „nothing“. You
dial only number of memory which you want erase and
confim it.
22 very important feature is acknowledge character
setting. Default is #. When is # used for PBX features
you can change it on *.
24 An analogue phones are not enable send „+„ which is
very used in GSM. In this case is possible to use
combination „00„ to send it to mobile phone.
31 This feature identificated connection of Mini Gate to
external line at some type of PBX (ex.:Siemens Hicom).
29 This feature is used for searching of antenna best
position. After feature activation you get tones
immediatelly. You end the feature by hang up.
32,35 The GSM phones requested command to connection on
inserted number. The BLUE GATE will send a
command immediately after acknowledge character
dialling (#).
