Telstra DEVG2020 Manuel utilisateur

PREMIUMBUSINESS

GATEWAY-DEVG2020

DIGITAL BUSINESS USER

GUIDE

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 2

VERSION 2.03

NEED MORE SUPPORT?

If you have questions beyond this guide, we want to help.

To learn more about your Business Broadband or Digital Business tools and features, visit the Business

Broadband support page at http://www.telstra.com.au/business-enterprise/help-support/software-

downloads/index.htm or if you are a Digital Business customer, visit Digital Business Online Support page at

http://www.telstra.com/digitalbusiness/support

To speak with a Digital Business consultant, or set up a Digital Business training session, phone us on 13 2000

and say “Digital Business” when prompted. Our consultants are available 24 hours a day.

When calling, please have your Account Number or phone number, including area code, ready for the consultant.

CONVENTIONS USED IN THIS GUIDE

The following typographical conventions are used in this guide for simplicity and readability:

Web addresses, e-mail addresses and hyperlinks are shown in bold italics, for example

www.telstraenterprise.com.au.

This work is copyright. Apart from any use as permitted under the Copyright Act 1968, information contained within this manual

cannot be used for any other purpose other than the purpose for which it was released. No part of this publication may be

reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,

recording or otherwise, without the written permission of Telstra Corporation Limited.

Words mentioned in this book that are known to be trademarks, whether registered or unregistered, have been capitalised or

use initial capitals. Terms identified as trademarks include Cisco®, Microsoft®, Microsoft PC®, Apple®, AirPort®, Mac®,

Linksys®.

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 3

VERSION 2.03

WHAT’S INSIDE

1. INSTALLING THE NETGEAR DEVG2020 GATEWAY 4

2. TURNING ON/OFF WIFI (WIRELESS) 6

2.1. CHANGING WIFI CREDENTIALS 7

3. ACTIVATE DIGITAL BUSINESS BROADBAND BACK-UP 10

4. NETGEAR GATEWAY CONFIGURATION FOR REMOTE

CLIENT ACCESS 12

4.1. CONFIGURATION OF THE GATEWAY VIA THE GUI 12

4.2. CONFIGURATION OF THE GATEWAY VIA THE WIZARD 13

5. PROCEDURE FOR INSTALLING VPN PROSAFE CLIENT

LITE FOR WINDOWS 16

6. HOW TO OPEN A VPN CONNECTION WITH THE PROSAFE

CLIENT 22

7. SITE-TO-SITE VPN CONFIGURATION 23

APPENDIX 1 –MINIMUM SYSTEM REQUIREMENTS FOR PROSAFE VPN

CLIENT 25

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 4

VERSION 2.03

1. INSTALLING THE NETGEAR DEVG2020 GATEWAY

Please have your Digital Business Configuration Summary emailed to you when you purchased Digital Business.

The Configuration Summary contains the login credentials required to configure the gateway and connect to the

internet.

Connecting the DEVG2020 Gateway:

1. Plug the power adaptor into the wall socket

2. Connect the other end to the socket on the gateway labelled ‘Power(12V, 2.5A)’. Turn On the power point

on the wall socket

3. Turn On the gateway by pressing the Power ON/OFF button

4. Take the provided grey ADSL cable and connect one end to the grey port on the gateway labelled ‘DSL.

Connect the other end of the cable to the phone socket in your wall

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 5

VERSION 2.03

5. Take the provided white Ethernet cable with yellow tips and connect one end to a yellow port on the

gateway labelled ‘LAN. Connect the other end to your computer or laptop’s Ethernet port.

6. Open up a web browser on your computer and type in telstrabusiness.com. Follow the on-screen

instructions to connect to the internet. The login and password required to connect to the internet is

provided on your Configuration Summary email.

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 6

VERSION 2.03

2. TURNING ON/OFF WIFI (WIRELESS)

The DEVG2020 Gateway is delivered with its WiFi turned On and configured with a unique WiFi Id and WPA2 Key

(Password). The Id, also known as SSID, and the WPA2 Key, are available on a card provided in the packaging

(Figure 1).

Figure 1: WiFi Credentials Card

You can switch Off the WiFi on the router by pressing the WiFi On/Off button on the front of the Gateway (Figure

2).

Figure 2: Turning On/Off the WiFi

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 7

VERSION 2.03

2.1. CHANGING WIFI CREDENTIALS

Connect a PC/laptop to the Gateway, and open an internet browser.

The IP address and login credentials to the Netgear DEVG2020 Genie is printed at the bottom of the gateway

(Figure 3).

Figure 3: DEVG2020 Genie URL and Login Credentials

Enter the IP address 192.168.15.1 into internet browser. Press Enter to access the Genie’s Login page (Figure 4).

Type the user name “admin”, password “telstra” and press Enter to reach the Genie’s Welcome Page (Figure 5).

Figure 4: DEVG2020 Genie

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 8

VERSION 2.03

Figure 5: Genie Welcome Page

Click on “Wireless” in the left hand menu to view and modify the WiFi credentials (Figure 5).

Figure 6: Wireless Setting

In the field Name (SSID), in Figure 6 above, type in the new Wireless network name.

Note: WPA2-PSK [AES] must be selected under section Security Options.

Scroll down the page to change the WPA2 key in the field name Paraphrase. Press Apply to save changes

(Figure 7).

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 9

VERSION 2.03

Figure 7: Changing WPA2 Key (Password)

Figure 8: Wireless Network credentials updated

The new SSID and WPA2 key will displayed on the welcome page (Figure 8).

Note: Computers, Tablets and phones must be reconfigured to connect to the Wireless network using the new

credentials. This includes previously connected devices.

VPN CONFIGURATION GUIDE PREMIUM BUSINESS GATEWAY - DEVG2020 10

VERSION 2.03

3. ACTIVATE DIGITAL BUSINESS BROADBAND BACK-UP

Figure 9: Digital Business Broadband Back-up.

Enter the IP address 192.168.15.1 into internet browser and press Enter to access the Genie’s Login page (Figure

4). Type the user name “admin”, password “telstra” and press Enter to reach the Genie’s Welcome Page (Figure

9).

Figure 9: Genie Welcome Page

Click on “Mobile Internet” in the left hand menu (Figure 9) to reach the Mobile Set-up page (Figure 10).

Table des matières

Autres manuels Telstra Porte

Telstra

Telstra Gateway Max Manuel utilisateur

Telstra

Telstra Elite Manuel utilisateur

Telstra

Telstra TG797n V3 Manuel utilisateur

Telstra

Telstra T-GATEWAY Manuel utilisateur

Telstra

Telstra Elite Manuel utilisateur

Telstra

Telstra ULTIMATE Gateway Manuel utilisateur

Telstra

Telstra T-GATEWAY Manuel utilisateur

Telstra

Telstra TG797n V3 Instructions de montage

Telstra

Telstra nbn FTTC Manuel utilisateur

Telstra

Telstra bigpond velocity Manuel utilisateur

Telstra

Telstra Gateway Max Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur