Telematrix 3002MWD5 Manuel utilisateur

3002MWD5

2 LINE -5 MEMORY

INSTALLATION

AND USER GUIDE

Features ...........................................………..……………………………………................................... 1

Controls ...........................................................................………………………………………………..2

Switch Settings .....................................….......................……………………………………………...... 4

Installation .....................................................................……………………………………………........ 5

Wall Mounting .....................................….......................……………………………………………........ 7

Programming Speed Dial Memory .................................……………………………………………....... 8

Operation ........................................................................……………………………………………..... 11

Care and Maintenance ..................................................……………………………………………....... 15

Service …………………………………………………..……………………………………….…………16

Warranty .......................................................................……………………………………………....... 17

CONTENTS

FEATURES

?Two Line

?Convenient Data Port

?5 Single Button Memory Locations With Secure Programming

?Tone Dialing

?Speaker Key

?Conference Key

?Mute Key

?Handset Volume Control

?TouchLite™Message Waiting Retrieval

?Store Key (submerged))

?Storable Flash Function (600 mS) (submerged)

?Storable Pause Function (3.6 seconds) (submerged)

?HI/LOW Ringer Volume Control Switch

?Desk or Wall Mountable

?Fully Modular, Easy To Install

DEFINITION OF CONTROLS

1. Handset ..........…………..………….........…... Hearing aid compatible, low profile styling.

2. Ringer Controls ………………….……………. Adjusts the volume of the ringers to HI/LOW setting.

3. Handset Jack ……………………………….…Modular receptacle where handset cord plugs into the base unit.

4. Dial Pad ………………………………….……..Large keys used for dialing.

5. Conference Key ………………………………Used for conference calling.

6. Handset Volume Control ……………….…….. Controls the loudness of the receiver volume when pressed.

7. Speaker Key ……………………………………Used to activate speaker

8. Mute Key ……………………………………….. Used to mute speaker key and handset

9. Hold Key ………………………………………..Used to place caller on hold

10. Message Waiting TouchLite™Key ………….. Used to call voice mail to retrieve messages.

11. Pause Key ……………………………………...(Submerged Key) Used to program a 3.6 second pause in memory.

12. Flash Key …………………………………….…(Submerged Key) Used to provide a 600 mS line break to access PBX/Centrex.

13. Feature Access Keys …………………………. 5 Programmable memory locations for frequently dialed phone numbers and access codes.

14. Data Port ……………………………………….. Used to connect a computer modem, fax machine, or answering device.

15. Store Key ……………………………………….(Submerged Key) Used to program information for speed dialing.

16. NEON/LED Message Waiting Switch ………. Used to Select Message Waiting indication Lamp Voltage.

CONTROLS

(2)

(14)

LINE2

LOWHILOW

LINE1

HANDSET

(1)

(3)

FRONT VIEW

HOLD LINE1 LINE2

MUTE

SPEAKER

VOL

PRESS HERE

REDIAL/PAUSE

CONF.

FOR MESSAGES

STORE

NEONOFFLED

FLASH

RINGER/HOLD

INUSE

(4)

(5)

(11)

(10)

(12)

(13)

(6)

(7)

(8)

(9)

(15)

(16)

Figure 5

SWITCH SETTINGS

There are installer selectable switches located on the bottom base underneath a protective plastic overlay. These switches are hid-

den behind a plastic cover for security. To locate, remove the plastic covers using a sharp pointer or paper clip as shown.

Line Voltage Selectors

The 3002MWD5 is designed to operate behind PBX telephone systems rated

between 24 volts and 48 volts. There are line voltage selector switches that

must be set according to the PBX system rating that the phone will be in-

stalled. There are two (2) switches, the first for Line 1 and the other for Line

2. Each switch has three (3) setting options. They are: “24V/48V/OFF”. Set

the switches by simply sliding to the appropriate setting. The ”OFF” setting is

used to turn off the line if a line appearance is not wired to the telephone.

(figure 6)

INSTALLATION

Parts Check List

The following parts are included in this package:

1. 15’ modular telephone line cord.

2. Modular coiled handset cord.

3. Base unit

4. Handset

Caution

?Never install telephone wiring during a lightning storm.

?Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

?Never touch uninstalled telephone wires or terminals unless the telephone line has been disconnected at the network interface.

?Use caution when installing or modifying telephone lines.

Figure 3

Connecting The Handset Cord

A 10’ modular coil handset cord is provided.

To install, simply plug one end of the handset

cord into the modular jack on the handset.

The remaining end of the handset cord plugs

into the jack labeled “Handset” located on

the left side of the base unit.

(figure 3)

INSTALLATION

Connecting The Line Cord

A 15’ modular line cord is provided.

To install, simply plug one end of the line

cord into the modular jack located on the

back of the base unit. The remaining end of

the line cord plugs into the wall jack.

(figure 4)

Figure 4

HANDSET

LINE

WALL MOUNTING

Wall Mounting Your 3002MWD5

The 3002MWD5 was designed to be conveniently wall mounted.

There is no additional hardware required. Follow these easy

steps:

1. The handset retaining clip must be engaged to secure the

handset when hanging up. To engage the clip, unsnap the

clip, rotate the clip 180º and then snap the clip into place.

(figure 7)

2. Plug one end of a short line cord (not included) into the line

jack on the back of the Marquis base unit. Plug the remaining

end of the short line cord into the wall jack. Next, guide the

phone onto the studs of the wall jack. Pull down firmly until

you feel it snap into place. The unit is now wall mounted.

(figure 8)

Figure 8

Figure 7

1. UNSNAP

2. ROTATE 180 .

3. SNAP INTO PLACE.

24V 48V OFF

LABEL-FCC

LABEL-S/NO.

LABEL-IC

LABEL-ETL

WEDGE

2.SNAP INTO PLACE.

TABS.

1.PRESS THE RELEASE

MOUNTING

PRESS HERE

REDIAL/PAUSE

CONF.

FOR MESSAGES

Figure 9

PROGRAMMING SPEED DIAL

The “STORE”, “FLASH”, and “PAUSE” function

keys are located underneath the clear plastic overlay

and paper faceplate. To access, lift off the overlay

and paper faceplate using a paperclip or sharp

pointer. (figure 9 and 10)

Figure 10

STORENEON OFF LED FLASH

Table des matières

Autres manuels Telematrix Téléphone

Telematrix

Telematrix Marquis EUROMW5 Manuel utilisateur

Telematrix

Telematrix Marquis 2800MWD Manuel utilisateur

Telematrix

Telematrix MARQUIS 3300 Series Manuel utilisateur

Telematrix

Telematrix 3302TRM Manuel utilisateur

Telematrix

Telematrix 2802MWD Manuel utilisateur

Telematrix

Telematrix 1L Trimline Manuel utilisateur

Telematrix

Telematrix Marquis 2800MWB Manuel utilisateur

Telematrix

Telematrix Retro Series Manuel utilisateur

Telematrix

Telematrix Marquis Series 3300LBY Manuel utilisateur

Telematrix

Telematrix MARQUIS 3100 Series Manuel utilisateur

Telematrix

Telematrix Marquis 3000MW10 Manuel utilisateur

Telematrix

Telematrix Marquis 2800MW5 Manuel utilisateur

Telematrix

Telematrix Spectrum Plus SP300 Manuel utilisateur

Telematrix

Telematrix Spectrum Plus SP200 Manuel utilisateur

Telematrix

Telematrix marquis 3000MW5 Manuel utilisateur

Telematrix

Telematrix Marquis 3002MWS Manuel utilisateur

Telematrix

Telematrix Spectrum Plus LP550 Manuel utilisateur

Telematrix

Telematrix Marquis 3000MWB Manuel utilisateur

Telematrix

Telematrix SIP 9600IP Manuel utilisateur

Telematrix

Telematrix DECT MWD5 Manuel utilisateur

Telematrix

Telematrix Spectrum Plus LP550 Instructions d'installation et d'utilisation

Telematrix

Telematrix Spectrum Plus DC550 Manuel utilisateur

Telematrix

Telematrix Spectrum Plus DC640 Manuel utilisateur

Telematrix

Telematrix Spectrum Plus SP200 Manuel d'installation

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur