Tektronix P6209 Manuel utilisateur

Form 080/01

Complimentary Reference Material

This PDF has been made available as a complimentary service for you to assist in

evaluating this model for your testing requirements.

T G offers a wide range of test equipment solutions, from renting short to long

term, buying refurbished and purchasing new. Financing options, such as

Financial Rental, and Leasing are also available on application.

T G will assist if you are unsure whether this model will suit your requirements.

Call T G if you need to organise repair and/or calibrate your unit.

If you click on the “Click-to-Call” logo below, you can all us for FREE!

TMG Corporate Website TMG Products Website

Disclaimer:

All trademarks appearing within this PDF are trademarks of their respective owners.

Instruction Manual

P6209

4 GHz 5X Active Probe

071-0634-03

Warning

The servicing instructions are for use by qualified

personnel only. To avoid personal injury, do not

perform any servicing unless you are qualified to

do so. Refer to all safety summaries prior to

performing service.

www.tektronix.com

Tektronix products are covered by U.S. and foreign patents, issued and

pending. Information in this publication supercedes that in all previously

published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077

TEKTRONIX, TEK, TEKPROBE, and SureFoot are registered trademarks,

and SureToe, FlexLead, and KlipChip are trademarks of Tektronix, Inc.

WARRANTY

Tektronix warrants that this product will be free from defects in materials and

workmanship for a period of one (1) year from the date of shipment. If any such

product proves defective during this warranty period, Tektronix, at its option,

either will repair the defective product without charge for parts and labor, or will

provide a replacement in exchange for the defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of

the defect before the expiration of the warranty period and make suitable

arrangements for the performance of service. Customer shall be responsible for

packaging and shipping the defective product to the service center designated

by Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of

the product to Customer if the shipment is to a location within the country in

which the Tektronix service center is located. Customer shall be responsible for

paying all shipping charges, duties, taxes, and any other charges for products

returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by im-

proper use or improper or inadequate maintenance and care. Tektronix shall not

be obligated to furnish service under this warranty a) to repair damage resulting

from attempts by personnel other than Tektronix representatives to install, repair

or service the product; b) to repair damage resulting from improper use or

connection to incompatible equipment; or c) to service a product that has been

modified or integrated with other products when the effect of such modification

or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THIS

PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IM-

PLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRAN-

TIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE

PRODUCTSISTHESOLEANDEXCLUSIVEREMEDYPROVIDEDTOTHE

CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS

VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDEN-

TAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER

TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBIL-

ITY OF SUCH DAMAGES.

P6209 4 GHz Probe Instruction Manual i

Table of Contents

General Safety Summary v..............................

Service Safety Summary vii..............................

Contacting Tektronix viii.................................

Product Description

Options 1............................................

Features and Standard Accessories 2......................

Optional Accessories 7.................................

Configuration

Probe Offset 9........................................

Functional Check

Operating Basics

Handling the Probe 13..................................

Maximum Nondestructive Input Voltage 13.................

Input Linear Dynamic Range 13..........................

Ground Lead Length 14.................................

Helpful Hints

Low-inductance Grounding 17............................

SureFoot Grounding 18.................................

Probe Tip Test Points 19.................................

Specifications

Table of Contents

ii P6209 4 GHz Probe Instruction Manual

Theory of Operation

Probe Head and Cable Assembly 30.......................

Compensation Box 30...................................

Offset Amplifier 30.....................................

Probe Identification EEPROM 30.........................

TEKPROBE SMA Interface 31...........................

VCC, +7 V Regulator 31................................

Performance Verification

Equipment Required 33.................................

Equipment Setup 34....................................

Output Zero 35........................................

DC Attenuation Accuracy 36.............................

Rise Time 38..........................................

Adjustments

Removing the Compensation Box Bottom Cover 43...........

Adjustment Locations 44................................

Offset Zero 44.........................................

Offset Scale 46........................................

Maintenance

Inspection and Cleaning 49..............................

Replacement Parts 49...................................

Preparation for Shipment 49..............................

Troubleshooting

Replaceable Parts

Parts Ordering Information 55............................

Using the Replaceable Parts List 56........................

Table of Contents

P6209 4 GHz Probe Instruction Manual iii

List of Figures

Figure 1: Dynamic and offset limitations 10.................

Figure 2: Probe functional check connections 11.............

Figure 3: Ground lead equivalent circuit 14.................

Figure 4: Low-inductance grounding 17....................

Figure 5: Using a SureFoot adapter for grounding 18..........

Figure 6: Using a probe tip as a test point 19.................

Figure 7: Typical input impedance and phase versus frequency 24

Figure 8: Typical bandwidth 24...........................

Figure 9: Dimensions of probe head and compensation box 26..

Figure 10: P6209 simplified schematic diagram 29............

Figure 11: TEKPROBE SMA Interface pin assignments 31.....

Figure 12: P6209 output zero setup 35......................

Figure 13: P6209 DC attenuation accuracy setup 37...........

Figure 14: Test system rise time setup 38...................

Figure 15: Test system and probe rise time setup 39...........

Figure 16: Removing the compensation box bottom cover 43...

Figure 17: P6209 adjustment and measurement locations 44....

Figure 18: P6209 offset zero setup 45......................

Figure 19: P6209 offset range setup 47.....................

Figure 20: Compensation box test point locations 52..........

Figure 21: TEKPROBE SMA Interface pin assignments 52.....

Figure 22: P6209 replaceable parts 57......................

Figure 23: P6209 standard accessories 58...................

Figure 24: P6209 optional accessories 60...................

Table of Contents

iv P6209 4 GHz Probe Instruction Manual

P6209 4 GHz Probe Instruction Manual v

General Safety Summary

Review the following safety precautions to avoid injury and prevent

damage to this product or any products connected to it. To avoid

potential hazards, use this product only as specified.

Only qualified personnel should perform service procedures.

To Avoid Fire or Personal Injury

Connect and Disconnect Properly. Connect the probe outputs to the

measurement instrument before connecting the probe to the circuit

under test. Disconnect the probe input and the probe ground from the

circuit under test before disconnecting the probe from the measure-

ment instrument.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe

all ratings and markings on the product. Consult the product manual

for further ratings information before making connections to the

product.

Connect the ground lead of the probe to earth ground only.

Do Not Operate Without Covers. Do not operate this product with

covers or panels removed.

Do Not Operate With Suspected Failures. If you suspect there is

damage to this product, have it inspected by qualified service

personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Table des matières

Autres manuels Tektronix Instrument de mesure

Tektronix

Tektronix P6204 Manuel utilisateur

Tektronix

Tektronix 3177 Manuel utilisateur

Tektronix

Tektronix P6112 Manuel utilisateur

Tektronix

Tektronix WFM2300 Manuel utilisateur

Tektronix

Tektronix WVR5200 Series Manuel d'utilisation et d'entretien

Tektronix

Tektronix TLA7000 Series Manuel utilisateur

Tektronix

Tektronix P6022 Manuel utilisateur

Tektronix

Tektronix 6 series Guide de l'utilisateur

Tektronix

Tektronix SPG8000A Manuel utilisateur

Tektronix

Tektronix WVR5000 Instructions de montage

Tektronix

Tektronix Keithley 2601B-PULSE Manuel utilisateur

Tektronix

Tektronix TLA721 Manuel utilisateur

Tektronix

Tektronix P6139B Manuel utilisateur

Tektronix

Tektronix TPR1000 Instructions d'installation

Tektronix

Tektronix P6562A Manuel utilisateur

Tektronix

Tektronix MTS4000 MPEG Manuel

Tektronix

Tektronix P6022 Manuel utilisateur

Tektronix

Tektronix MTS4000 MPEG Manuel utilisateur

Tektronix

Tektronix TLA7PG2 Instructions d'installation et d'entretien

Tektronix

Tektronix RSA7100A Manuel

Tektronix

Tektronix RSA306 Guide de référence

Tektronix

Tektronix 1200C01 Manuel utilisateur

Tektronix

Tektronix 1720 Manuel utilisateur

Tektronix

Tektronix 1503 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur