Tektronix P6131 Manuel utilisateur

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

Instruction Manual

P6131

10X Passive Probe

for 2400 Series Oscilloscopes

070-5514-03

*P070551403*

070551403

Warning

The servicing instructions are for use by qualified

personnel only. To avoid personal injury, do not

perform any servicing unless you are qualified to

do so. Refer to all safety summaries prior to

performing service.

www.tektronix.com

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077-1000

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

WARRANTY

Tektronix warrants that the products that it manufactures and sells will be free from defects in materials and workmanship

for a period of one (1) year from the date of purchase from an authorized Tektronix distributor. If any such product proves

defective during this warranty period, Tektronix, at its option, either will repair the defective product without charge for

parts and labor, or will provide a replacement in exchange for the defective product. Batteries are excluded from this

warranty.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the

warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for

packaging and shipping the defective product to the service center designated by Tektronix, shipping charges prepaid, and

with a copy of customer proof of purchase. Tektronix shall pay for the return of the product to Customer if the shipment is

to a location within the country in which the Tektronix service center is located. Customer shall be responsible for paying

all shipping charges, duties, taxes, and any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate

maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting

from attempts by personnel other than Tektronix representatives to install, repair or service the product; b) to repair

damage resulting from improper use or connection to incompatible equipment; c) to repair any damage or malfunction

caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or integrated with other

products when the effect of such modification or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE LISTED PRODUCTS IN LIEU OF

ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND

EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX

AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Contacting Tektronix

Product

support For questions about using Tektronix measurement products, call

toll free in North America:

1-800-833–9200

6:00 a.m. – 5:00 p.m. Pacific time

Or contact us by e-mail:

[email protected]

For product support outside of North America, contact your local Tektronix distributor

or sales office.

Service

support Tektronix offers extended warranty and calibration programs as options on many

products. Contact your local Tektronix distributor or sales office.

For a listing of worldwide service centers, visit our web site.

For other

information In North America:

1-800–833–9200

An operator can direct your call.

To write us

Web site

Tektronix, Inc.

P.O. Box 500

Beaverton, OR 97077-1000

USA

www.tektronix.com

P6131 Instruction Manual i

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it. To avoid potential hazards, use this

product only as specified.

Only qualified personnel should perform service procedures.

Connect and Disconnect Properly. Do not connect or disconnect probes or test

leads while they are connected to a voltage source.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

The common terminal is at ground potential. Do not connect the common

terminal to elevated voltages.

Do not apply a potential to any terminal, including the common terminal, that

exceeds the maximum rating of that terminal.

Do Not Operate With SuspectedFailures. If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/DampConditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Terms in this Manual. The following terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

To Avoid Fire or

Personal Injury

Symbols and Terms

ii P6131 Instruction Manual

Service Safety Summary

Only qualified personnel should perform service procedures. Read this Service

Safety Summary and the General Safety Summary before performing any service

procedures.

Do Not Service Alone. Do not perform internal service or adjustments to this

product unless another person capable of rendering first aid and resuscitation is

present.

P6131 Instruction Manual 1

Operating Basics

The P6131 probe is a subminiature, 10X, passive probe designed specifically for

use with Tektronix 2400 Series oscilloscopes. It is fully compatible with the

Tektronix family of subminiature probe accessories. The P6131 is available

with 1.3 and 2 meter cable.

WARNING. To avoid electric shock when using the probe, do not touch the

metallic portions of the probe head while connected to a voltage source.

Lead Inductance

Inductance introduced by long leads can form resonant circuits that ring and

distort the true waveform if driven by signals containing significant frequency

components at or above resonance. To maintain optimum waveform fidelity,

keep the ground lead and signal input connection as short as possible.

Probe Compensation

Due to variations in oscilloscope input characteristics, probe low-frequency

compensation should be checked and or adjusted if you move the probe from one

oscilloscope input to another. Connect the probe tip to a 1 kHz square wave

signal (such as the oscilloscope calibrator output) and use a nonconductive

low-reactance alignment tool to adjust the compensation capacitor.

High-frequency compensation seldom requires adjustment. However, if the probe

has excessive high-frequency aberrations or insufficient bandwidth, you can

adjust the high-frequency compensation through holes in the compensation box

inner metal shield.

For complete low-frequency and high-frequency compensation adjustment

procedures, see page 10.

Operating Basics

2P6131 Instruction Manual

Grounding the Probe

Connect the probe to the instrument and connect the ground lead to ground

before making any measurement. Ensure that no part of the ground lead contacts

voltage in the circuit under test. Except for the probe tip and BNC center

conductor, all accessible metal (including the ground clip) is connected to the

BNC shell.

WARNING. To avoid electric shock when using the probe, keep your fingers

behind the finger guard on the probe body. See Figure 1 below.

Hand contact area

Finger guard

Figure 1: Probe finger guard and hand contact area

P6131 Instruction Manual 3

Specifications

The characteristics listed in Table 1 apply to P6131 probes installed on Tektronix

2445 and 2465 oscilloscopes or 7A42 plug-ins, unless otherwise noted.

Specifications apply when the instruments warm up for a period of at least

20 minutes in an environment that does not exceed the limits described in

Table 2 on page 5.

Table 1: Electrical characteristics1

Characteristic Description

Attenuation210X: ±1% at DC

Inputresistance2,3 10 MW±1% at DC

Inputcapacitance3

1.3 m 10.8 pF

2 m 13.5 pF

Compensationrange 14 pF to 18 pF

Signaldelay

1.3 m 6.3 ns ±100 ps

2 m 9.0 ns ±200 ps

System bandwidth (–3 dB) On a 2465 or 7A42: On a 2445:

1.3 m ≥300 MHz ≥150 MHz

2 m ≥250 MHz ≥150 MHz

Maximum Input Voltage4,5 300 V RMS CAT I or 300 V DC CAT I

150 V RMS CAT II or 150 V DC CAT II

100 V RMS CAT III or 100 V DC CAT III

425 V peak, @50% DF, <1 sec PW

750 V peak, @10% DF, <50 ms PW

See Figure 4 for voltage derating curve.

1Probe installed on Tektronix 150 MHz (or less) 2400 Series oscilloscope.

2Systemcharacteristic.

3Also see Figure 3.

4As defined in EN61010-1. See Certifications and compliances in Table 4

5RMS=Root Mean Square=rms=The square root of the average of the sum of the

squares of the instantaneous voltage in one cycle = .

300 VDC=300V RMS, 420 V Peak (sinewave)=300 V RMS See Figure 2.

ȍ(fxi)2ńn

Table des matières

Autres manuels Tektronix Instrument de mesure

Tektronix

Tektronix BPA100 Manuel utilisateur

Tektronix

Tektronix WFM90D Manuel utilisateur

Tektronix

Tektronix DSA8300 Manuel

Tektronix

Tektronix RSA6100A Series Manuel d'utilisation et d'entretien

Tektronix

Tektronix P6562A Manuel utilisateur

Tektronix

Tektronix P6112 Manuel utilisateur

Tektronix

Tektronix TRCP0300 Manuel utilisateur

Tektronix

Tektronix MTS415 Manuel utilisateur

Tektronix

Tektronix WVR6020 Manuel d'utilisation et d'entretien

Tektronix

Tektronix P6460 Manuel utilisateur

Tektronix

Tektronix P6021 Manuel utilisateur

Tektronix

Tektronix P6139A Manuel utilisateur

Tektronix

Tektronix FiberMaster TFP2A Manuel utilisateur

Tektronix

Tektronix P6339A Manuel utilisateur

Tektronix

Tektronix DM 502 Manuel utilisateur

Tektronix

Tektronix TLA7012 Manuel utilisateur

Tektronix

Tektronix H600 RFHawk Manuel utilisateur

Tektronix

Tektronix KEITHLEY 2450-EC Manuel utilisateur

Tektronix

Tektronix AM 503B Series Manuel utilisateur

Tektronix

Tektronix Keithley 7711 Manuel utilisateur

Tektronix

Tektronix Keithley SourceMeter 2461 Manuel utilisateur

Tektronix

Tektronix SG 505 Manuel utilisateur

Tektronix

Tektronix KEITHLEY 8606 Manuel utilisateur

Tektronix

Tektronix P7240 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur