Tekram Technology P5m4m Manuel utilisateur

MAINBOARD

Installation Guide

Rev: 1.01H

Date: April - 99

∗All other product names are trademarks or copyrights of their respective

owners.

∗Specifications and information contained in this manual are subject to change

without notice.

Installation Guide

Table of Contents

INTRODUCTION.............................................................................. 3

Product Description ........................................................................................3

Features & Specifications................................................................................4

Package Checklist...........................................................................................5

Board Level Feature........................................................................................6

Comprehensive Mainboard View....................................................................8

INSTALLATION................................................................................ 9

Installing the CPU ..........................................................................................9

Setting the Jumpers.......................................................................................10

Connections..................................................................................................14

Installing the Memory Modules (DIMM)......................................................26

Installing the Support Drivers and Utilities...................................................27

SOFTWARE SUPPORT................................................................. 30

Mainboard BIOS...........................................................................................30

Flash BIOS Programming Utility..................................................................31

Symbios SCSI Configuration Utility..............................................................32

DMI Utility...................................................................................................32

Installation Guide 3

INTRODUCTION

Product Description

Designed as a flexible, high-performance and cost-effective solution for System

Integrators and End Users alike, this mainboard provides the power and

expandability to meet the requirements of the most advanced operating systems

and software applications.

This mainboard is designed to provide Pentium –based (FSB 100MHz) system by

utilizing the VIA Apollo MVP4 AGPset on Micro-ATX Platform. By

incorporating such advanced features as Super I/O, AC97 audio, Ultra DMA/66

Bus Mastering IDE, Universal Serial Bus (USB) and Hardware Monitoring onto

the mainboard, optimum system performance is assured and system design and

implementation is simplified.

Fully “Plug & Play” compatible via an Award BIOS, this mainboard facilitates

easy system configuration and peripheral setup. Also, the Award BIOS supports

ACPI Readiness and is compatible with the PC’98 specification. This mainboard is

the ideal foundation for high-end computer systems.

INTRODUCTION

Installation Guide

Features & Specifications

Processor ZIF socket 7 support AMDK6-2 / K6-3 up to 500 MHz,

INTELPentium MMX up to 233 MHz

Chipset VIA Apollo MVP4 AGPset

BIOS Award BIOS, support DMI, Green PC, Plug-and-Play, ACPI,

Boot from CD-ROM, LS-120 120MB F.D.D.., ZIP Devices

Support SymbiosSCSI BIOS

Anti-virus BIOS for prevention against boot-virus

System Memory 3×168-pin DIMM Sockets up to 768 MB SDRAM Memory

Capacity

Support 8/16/32/64/128/256 MB Memory Module

ECC Supported

On-board I/O

Features 1×Floppy Port ( LS120) 2×USB Ports

1×Parallel Port (EPP, ECP Port) 1×IrDA TX/RX Header

1×Serial Port (16550 Fast UART Compatible)

1×Serial Header (16550 Fast UART Compatible)

1×Internal Keyboard Header

1×MIDI/Game port

1×Audio Jacks: Line Out, Line In, and Mic. In

1×Video Port

Advanced

Features 1. AGP 3D Graphics and AC97 Audio on board

2. Wake-up on LAN

3. Modem Ring-in Remote Power on

4. Hardware Monitoring (Fan, Temperature, Voltage)

5. Xstore Pro IDE Bus Master Software Driver (*)

6. Anti-Virus PC-Cillin Software (*)

PCI Bus Master

IDE 2×PCI Bus Master IDE Port

UltraDMA/66 Mode up to 66MB/s transfer rate

Power

Connector 3V, 5V and 12V 20-pin ATX 20-pin Power Connector

Expansion Slots 4×32-bit PCI Slots, 1×16-bit ISA Slots

Switching VR Switching Voltage Regulator to support 1.3V to 3.5V

Form Factor Micro-ATX Size (7.7” x 9.6” or 200mm x 245mm)

INTRODUCTION

Installation Guide 5

Remark:

The XStore Pro IDE Driver enhances memory management by working with the

Windows 95/98 operating system, resulting in higher system performance by

implementing "read-ahead caching after seeking". This is especially effective with

the large block sizes of modern hard disks.

PC-cillin anti-virus software provides a powerful defense against viruses to

protect data integration.

Package Checklist

Your mainboard package should include the items listed below. Damaged or

missing items should be reported to your vendor.

þThe mainboard

þFloppy disk ribbon cable

þIDE ribbon cable

þThis Installation Guide

þBIOS, Driver & Utility Guide

þCD-ROM containing the following support software:

(The latest drivers can always be found at their respective web sites.)

§VIAPCI Bridge driver,

§VIA VxD driver,

§VIA PCI Mini-port driver

http://www.via.com.tw/drivers

§Support software for updating the FLASH BIOS

§HighPoint® XStore Pro IDE Bus Master

http://www.highpoint-tech.com

§Trend ® PC-cillin Anti-Virus software

http://www.antivirus.com

INTRODUCTION

Installation Guide

Board Level Feature

1. ISA slot 11. USB connectors

2. PCI slots 12. PS/2 mouse connector (top)

3. Mainboard BIOS 13. PS/2 keyboard connector (bottom)

4. AC97 codec chip 14. Power connector

5. MIDI/Game port 15. CPU socket (Socket 7)

6. Audio port 16. VIA Apollo MVP4 AGPset

7. COM2 connector 17. DIMM sockets

8. VGA connector 18. Primary IDE connector

9. Printer port connector 19. Secondary IDE connector

10. COM1 connector 20. Floppy connector

* Board Size: Micro-ATX 245 mm x 200 mm (9.6” x 7.7”)

INTRODUCTION

Installation Guide 7

1. ISA Slot: (1) 16-bit ISA slot.

2. PCI Slots: (4) 32-bit PCI slots are provided.

3. Mainboard BIOS: Award BIOS supporting “Plug and Play”, DMI, Green

PC specification, on screen setup for Enhanced IDE and Multi-I/O. The BIOS

is FLASH Upgradeable via the AWDFLASH Utility.

4. AC97 Codec Chip: AC97 audio codec chip.

5. MIDI/Game Port: 15-pin female MIDI/Joystick connector.

6. Audio Port: Three 1/8” female jacks for Line Out, Line In and MIC.

7. COM2 Connector: Connects to High-speed UART compatible serial port

bracket. COM2 can be directed to the Infrared Module for wireless connection

capability.

8. VGA Connector: 9-pin VGA connector.

9. Printer Port Connector: EPP and ECP compatible 25-pin D-Sub parallel

port.

10. COM1 Connector: High-speed UART compatible serial port.

11. USB Connectors: These connectors permit the connection of two USB

peripheral devices directly to the port without an external hub. USB is a new

technology supporting printers, fax modems and other telephony device.

12. PS/2 Mouse Connector: Supports PS/2 style mice.

13. PS/2 Keyboard Connector: Supports PS/2 style keyboards.

14. Power Connector: 20-Pin ATX Power Connector.

15. CPU Socket: ZIF Socket 7 for AMDK6-2 / K6-3 up to 450 MHz, Cyrix

up to MII-500, IntelPentium MMX up to 233 MHz.

16. VIA®Apollo MVP4 AGPset: Supports Socket 7 CPUs, UDMA66 and AGP

2x.

17. DIMM Sockets: (3) 168-pin DIMM sockets are provided to support a

maximum RAM memory capacity of 768 MB. DIMM types of 3.3 Volt true

SDRAM is supported and automatically detected by the BIOS.

18. Primary IDE Connector: Connector for first IDE channel. The on-board

PCI Bus Mastering IDE controller features support for DMA Mode 2 and PIO

Modes 3 and 4 for faster data transfer rates. (2) Connectors are provided for

support of up to (4) IDE devices on two channels. ATAPI Tape Drives and

CD-ROMs are also supported.

19. Secondary IDE Connector: Connector for second IDE channel.

20. Floppy Connector: Built-in floppy controller supports (2) 5.25" or 3.5"

(1.44MB or 2.88MB) floppy drives.

INTRODUCTION

Installation Guide

Comprehensive Mainboard View

Installation Guide 9

INSTALLATION

Static Precautions

Static electricity can be a serious danger to the electronic components on this mainboard. To

avoid damage caused by electrostatic discharge, observe the following precautions:

üDon’t remove the mainboard from its anti-static packaging until you are ready to install

it into a computer case. Also, handle add-in cards and modules by the edges or mounting

bracket.

üBefore you handle the mainboard in any way, touch a grounded, anti-static surface, such

as an unpainted portion of the system chassis, for a few seconds to discharge any built-

up static electricity.

Installing the CPU

üWARNING: Use of a CPU Cooling Fan is required to prevent CPU from

overheating. The Fan should be installed first before inserting the CPU into its

socket.

1. Locate the ZIF (Zero Insertion Force) Socket 7.

2. First open the socket by pulling the lever sideways, then upwards. Notice how

the lever locks in place when pressed all the way down.

3. The CPU must be inserted with the correct

orientation. One corner of the CPU has a

“Notch” and looks different that the other

three. This corner is also missing a pin unlike the

other three and is marked with a white dot on

top of the CPU. Align this corner towards the

end of the lever as shown in the figure here.

Insert the CPU, press it down, and close the

lever until it locks into place.

INSTALLATION

Installation Guide

Setting the Jumpers

Jumpers are used on this mainboard to select various settings and features. A 2-pin

jumper has two settings: Open and Short (or Closed). The jumper is closed by

placing the Jumper Cap across the two pins, thereby connecting them. 3-pin

jumpers can be set to pins 1-2 or 2-3 connected. Pin-1 is labeled on the circuit

board.

3-pin Jumper 2-pin Jumper

Pin 1-2

Open

Pin 2-3

Short

CPU Clock Selection Jumper (JBF0-2 and JFS0-3)

After installing the CPU, you must set the clock selection jumpers to match the

frequency of the CPU. Find the Jumper Blocks labeled JBF0-2 and JFS0-3. Set the

jumpers according to your particular CPU type (a list of current available CPU

settings is provided on the following page).

Table des matières

Autres manuels Tekram Technology Carte mère

Tekram Technology

Tekram Technology P5T30-A4 Manuel utilisateur

Tekram Technology

Tekram Technology P5T30-B4 Manuel utilisateur

Tekram Technology

Tekram Technology S381M Manuel utilisateur

Tekram Technology

Tekram Technology P6BXA Manuel utilisateur

Tekram Technology

Tekram Technology P6F40-B5 Manuel utilisateur

Tekram Technology

Tekram Technology P5V30-B4 Manuel utilisateur

Tekram Technology

Tekram Technology P6B40D-A5 Manuel utilisateur

Tekram Technology

Tekram Technology P6E40-A4 Manuel utilisateur

Tekram Technology

Tekram Technology P6L40-A4E Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur