qy
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accep t any interference received, including interference that may cause undesired operation.
IMPO RTANT NO TE:
1. TO COM PLY WITH THE FCC RF EXPOSURE COM PLIANCE REQUIREMENTS, A
SEPARATION DISTANCE OF AT LEAST 20CM M UST BE M AINTAINED BETWEEN
THE ANTENNA OF THIS DEVICE AND ALL PERSONS. NO CHANGE TO THE
ANTENNA OR THE DEVICE IS PERMITTED. ANY CHANGE TO THE ANTENNA OR
THE DEVICE COULD RESULT IN THE DEVICE EXCEEDING THE RF EXPOSURE
REQUIREMENTS AND VOID USER’S AUTHORITY TO OPERATE THIS DEVICE.
2. THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPM ENT.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, p ursuant to p art 15 of the
FCC Rules. These limits are designed to provide reasonable p rotection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or
television recep tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna, (2) Increase the
separation between the equipment and receiver, (3) Connect the equipment into an outlet on a\circuit different from that to
which the receiver is connected, (4) Consult the dealer or an experienced radio/TV technician for help.
De partme nt of Communications-Canada
Canadian Compliance State me nt
This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations.
Cet ap pareil numerique de la classe B resp ect les exigencies du Reglement sur le material broilleur du Canada.
This device comp lies with Class B Limits of Industry of Canada. Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
This device is certified to the requirements of RSS-139-1 and RSS-210 for 2.4 GHz spread spectrum devices. The use of
this device in a system operating ether partially or completely outdoors may require the user to obtain a license for the
system according to the Canadian regulations. For further information, contact local Industry Canada office.
