TC-Helicon Perform-V Manuel utilisateur

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3

1 2 3

E60542611

Headphone volume

White = Off

Green = On

Hold an effect button

to enter edit mode.

After the effect level reaches maximum, the LED

ring resets and changes the style (sound) of the

effect. The LED color also changes for each style.

Turn the control knob. The

effect volume increases as

the LED segments ﬁll.

Tone automatically

and dynamically adds

EQ, compression, de-

essing and gating to

your voice.

Anti-Feedback helps

to eliminate squealing

from your speakers.

After all EQs have

been used, Anti-

Feedback will turn

down the level.

To prevent

feedback, place the

mic behind your

main speakers.

Pitch correction

“nudges” you to the

nearest semi-tone.

It won’t make a bad

singer good, but it

will subtly make your

pitch more accurate.

Hold 2 seconds

YOU WILL NEED…

A Preset is a group of

effects used to create

an overall sound.

Changes made to

Presets are saved

automatically.

If you have a

condenser mic,

MP-75 or MP-76,

you will need to turn

on +48V for it to work.

Talk mode bypasses

all of the effects so

you can talk to the

audience.

Tap in time with your

music to set the

tempo for Echo.

Tempo is global and

not stored within the

Presets.

QUICK GUIDE

Sing loud!

www.tc-helicon.com/products/perform-v/support/

www.tc-helicon.com/products/voicesupport/

support.tc-helicon.com

Switch-3 MP-76 MP-75

Audience

www.tc-helicon.com/products/perform-v/support/

Flat Correct Sharp

5 FX ON/OFF

6 PRESETS

3 SET GAIN 4 A

10 FX BYPASS

13 B EFFECT EDITING

16 B “BEAM” NEW SOUNDS

FULL MANUAL SUPPORT/FORUMS

11 TAP TEMPO

14 PITCH METER

17 UPDATES & PRESETS

12 CONDENSER MIC

15 MUSIC IN

18 STAGE SETUP

7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION

13 A EFFECT EDITING

16 A GET THE APP

19 ACCESSORIES

4 B

TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

Autres manuels pour Perform-V

Table des matières

Autres manuels TC-Helicon Matériel informatique

TC-Helicon

TC-Helicon PERFORM-VK Manuel utilisateur

TC-Helicon

TC-Helicon VoiceTone Correct XT Manuel utilisateur

TC-Helicon

TC-Helicon VoicePrism Manuel utilisateur

TC-Helicon

TC-Helicon VoiceDoubler Manuel utilisateur

TC-Helicon

TC-Helicon Quintet Manuel utilisateur

TC-Helicon

TC-Helicon VoicePro Manuel utilisateur

TC-Helicon

TC-Helicon PERFORM-VK Manuel utilisateur

TC-Helicon

TC-Helicon PERFORM-VE Manuel utilisateur

TC-Helicon

TC-Helicon VOICEPRISM PLUS Guide de configuration

TC-Helicon

TC-Helicon VoiceOne Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur