Synergy Global Technology LCD2U17-09 Manuel utilisateur







User Manual

17" FHD 1920 x 1080 LCD

Options :

- HDMI

- SDI

- BNC

- Touchscreen

- DC power

LCD2U17-09

2U 17” High Brightness FHD LCD 1000 cd/m²

Legal Information

First English printing, March 2023

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness

of the contents. The information in this document is subject to change without notice. We are not liable for any injury or

loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, ﬁre or electrical shock.

■Only qualiﬁed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualiﬁed service personnel.

What the warranty does not cover

■Any product, on which the serial number has been defaced, modiﬁed or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, ﬁre, water, lightning, or other acts of nature, unauthorized product modiﬁcation, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power ﬂuctuation or failure.

□Use of supplies or parts not meeting our speciﬁcations.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

Any changes or modiﬁcations made to this equipment may void the user’s authority to operate this equipment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment oﬀand on, the

user is encouraged to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

www.RackmountMart.com

Contents

< Part. 1 > LCD2U17-09

1.1 Package

Content P.1

1.2 Structure Diagram & Dimension P.1

1.3 Installation P.4

1.4 Connection P.6

< Part. 2 > Speciﬁcations / OSD

2.1 Product

Speciﬁcations P.8

2.2 Keyboard / Mouse Speciﬁcations P.10

2.3 On-screen Display Operation ( OSD ) P.12

< Part. 3 > Options

3.1 3G / HD / SD-SDI Broadcast-grade input P.14

3.2 Touchscreen : Projected Capacitive ( 10-point touch )

Resistive ( 1-point touch ) P.15

3.3 Options : DP / HDMI / DVI-D / BNC P.17

3.4 DC Power : 12V / 24V / 48V / 125V / 250V P.18

< Part. 4 > KVM Integration

4.1 LCD2U17-09 P.19

www.RackmountMart.com

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made speciﬁcally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip oﬀthe ﬁnish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microﬁber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microﬁber cloth.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

microﬁber cloth ﬁrst, not directly on the parts you are cleaning.

www.RackmountMart.com

P.1

LCD interchangeable module kit

Installation Slides

Carry handle to release the 2-pt lock

Audio speaker ( for SDI or HDMI option )

LCD membrane

Membrane switch (KVM option)

Keyboard interchangeable module kit

Mouse interchangeable module kit

LCD2U17-09 unit X 1

- LCD-A3004A 6ft DVI-D console cable X 1

( Alternative : LCD-A1014A 6ft VGA console cable )

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

The above package content is only for the single console models.

It varies with options such as KVM, SDI, HDMI, DVI-D, AV, Touchscreen & DC power.

< Part 1 >

< 1.1 > Package Content

< 1.2 > Structure Diagram

www.RackmountMart.com

P.2

Model Product Dimension

(W x D x H) Net Weight

LCD2U17-09 441.6 x 480 x 88 mm

17.4 x 18.9 x 3.5 inch 20.4 kg

44.9 lb

The weight is only for the single console models. It varies with accessories & options .

< 1.2 > Dimension

Front View

UNIT : mm

1mm = 0.03937 inch

Top View

Side View

Rear View

Power VGA

DVI-DUSB

AC Input

100~240V

www.RackmountMart.com

P.4

■Fix the LCD console drawer into the rack.

Complete the installation

Step 3

■Insert the left and right rear mounting brackets into

the LCD console drawer.

Step 1

< 1.3 > Installation - How to install Installation Slides

Step 2

■Measure the depth of the front and rear mounting rails.

■Align each rear mounting bracket to a suitable length.

M6 screw, cage nut & cup washer x 8 are provided.

www.RackmountMart.com

P.5

Figure 3.

Figure 2. ■Pull and hold the black arrow button on either side

of the LCD console drawer to unlock.

(shown in Figure 2).

Figure 1.

■A black arrow release button is located on the

front of each slide. (shown in Figure 1).

■Push the LCD console drawer into the rack.

(shown in Figure 3).

Caution : Keep your ﬁngers away from the slide

stop

< 1.3 > Installation - How to install Installation Slides

www.RackmountMart.com

P.6

Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such

as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while

servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD

console drawer. Before attempting to connect anything to the LCD console drawer, we suggest

turning oﬀthe power to all devices. Apply power to connected devices again only after the LCD

console drawer is receiving power. The company is not responsible for damage caused in this way.

USB server

POWER

LCD Console Drawer

console cable

DVI-D

USB

AC Input

100~240V

LCD Console Drawer

console cable

DVI-D

USB

POWER

DVI-D

USB

DVI console KVM

AC Input

100~240V

www.RackmountMart.com

< 1.4 > Connection to USB Server via LCD-A3004A cable

< 1.4 > Connection to external KVM via LCD-A3004A cable

LCD-A3004A

Table des matières

Autres manuels Synergy Global Technology Tiroir LCD

Synergy Global Technology

Synergy Global Technology LCD1U17-019 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD2U17-3K-011 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDK1016 Series Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U15-04 Series Manuel utilisateur

Synergy Global Technology

Synergy Global Technology MIL1U17-03 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-25 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U19-014 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U15-17 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U19-12 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD2U17-04 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD2U20-01 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDK10002-n Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD2U17-08 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-51 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-013 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-47 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD2U17-3H-01 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD2U17-07 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-26 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD2U17-3K-02 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-29 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-40 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-15 Manuel utilisateur

Manuels Tiroir LCD populaires d'autres marques

Acnodes

Acnodes KD 8228 Manuel utilisateur

Ameriwood

Ameriwood 9524328PCOM Manuel utilisateur

Kesseböhmer

Kesseböhmer TANDEM solo Manuel utilisateur

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manuel utilisateur

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur

NTI

NTI RACKMUX-V17-N Manuel utilisateur

Austin Hughes

Austin Hughes CyberView L120 Manuel utilisateur

Uplift Desk

Uplift Desk STR018 Manuel utilisateur

Acnodes

Acnodes KDC 81932 Manuel utilisateur

Acnodes

Acnodes RK1200T Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1501 Manuel utilisateur

Mocka

Mocka Mischa Manuel utilisateur

GRASS

GRASS DWD XP Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1701 Manuel utilisateur

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur

Fujitsu

Fujitsu RC25 Manuel utilisateur

Acnodes

Acnodes RK 1000B Manuel utilisateur

I-Tech

I-Tech RKP115 Manuel utilisateur