Supermicro SUPER 2027R-AR24NV Manuel utilisateur

SUPER STORAGE SYSTEM

2027R-AR24NV

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: December 27, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the 2027R-AR24NV. Installation

and maintainance should be performed by experienced technicians only.

The 2027R-AR24NV is a high-end server based on the SC216BAC-R920LPB 2U

chassis and the X9DRH-iF-NV dual processor serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X9DRH-iF-NV serverboard

and the SC216BAC-R920LPB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the 2027R-AR24NV into a

rack and check out the server conﬁguration prior to powering up the system. If your

server was ordered without processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

2027R-AR24NV.

SUPERSTORAGESYSTEM 2027R-AR24NV User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DRH-iF-NV serverboard, includ-

ing the locations and functions of connections, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when reconﬁg-

uring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC216BAC-R920LPB server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁguring SATA or peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Server Barebone Features.............................................................................. 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SATA .............................................................................................................. 1-2

PCI Expansion Slots....................................................................................... 1-2

I/O Ports..........................................................................................................1-2

Graphics Controller......................................................................................... 1-3

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

Hard Drives.....................................................................................................1-3

Front Control Panel.........................................................................................1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ...................................................................................2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground .........................................................................................2-3

2-5 Rack Mounting Instructions............................................................................. 2-4

Identifying the Sections of the Rack Rails......................................................2-4

Locking Tabs ...................................................................................................2-5

Releasing the Inner Rail .................................................................................2-5

Installing The Inner Rails on the Chassis.......................................................2-6

Installing the Outer Rails on the Rack............................................................2-7

Standard Chassis Installation ......................................................................... 2-8

SUPERSTORAGESYSTEM 2027R-AR24NV User's Manual

vii

Optional Quick Installation Method................................................................. 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................3-1

3-4 Drive Carrier LEDs..........................................................................................3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard...............................................................................5-1

Precautions .....................................................................................................5-1

5-2 Connecting Cables..........................................................................................5-2

Connecting Data Cables.................................................................................5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports..........................................................................................................5-3

5-4 Installing the Processor and Heatsink ............................................................5-4

Installing an LGA2011 Processor....................................................................5-4

Installing a CPU Heatsink...............................................................................5-7

Removing the Heatsink................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Support..............................................................................................5-8

DIMM Installation ............................................................................................5-8

Installing NVDIMMs.........................................................................................5-9

5-6 Adding PCI Add-On Cards............................................................................ 5-13

Table of Contents

viii

5-7 Serverboard Details ......................................................................................5-14

X9DRH-iF-NV Quick Reference....................................................................5-15

5-8 Connector Deﬁnitions ...................................................................................5-17

5-9 Jumper Settings............................................................................................ 5-23

5-10 Onboard Indicators........................................................................................5-25

5-11 SATA Ports....................................................................................................5-26

5-12 Installing Software.........................................................................................5-27

SuperDoctor III.............................................................................................. 5-28

5-13 Onboard Battery............................................................................................5-29

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel ..................................................................................................6-2

6-3 Removing the Chassis Cover .........................................................................6-3

5-9 System Fans................................................................................................... 6-4

6-4 System Cooling............................................................................................... 6-4

System Fans................................................................................................... 6-4

System Fan Failure......................................................................................... 6-4

Replacing System Fans..................................................................................6-4

Air Shrouds .....................................................................................................6-5

Installing the Air Shrouds in the Chassis........................................................6-5

6-5 Drive Bay Installation/Removal....................................................................... 6-7

Accessing the Drive Bays...............................................................................6-7

6-5 Power Supply ............................................................................................... 6-10

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Event Logs....................................................................................................7-25

7-5 IPMI...............................................................................................................7-27

7-6 Boot...............................................................................................................7-29

7-7 Security ......................................................................................................... 7-30

7-8 Save & Exit ................................................................................................... 7-31

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

SUPERSTORAGESYSTEM 2027R-AR24NV User's Manual

Chapter 1

Introduction

1-1 Overview

The 2027R-AR24NV is a high-end server comprised of two main subsystems: the

SC216BAC-R920LPB 2U server chassis and the X9DRH-iF-NV dual processor

serverboard. Please refer to our web site for information on operating systems that

have been certiﬁed for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 2027R-AR24NV, as listed below:

• One active CPU heatsink (SNK-P0048AP4)

• One passive CPU heatsink (SNK-P0048PS)

• Three 8-cm system fans (FAN-0126L4)

• One air shroud (MCP-310-39001-0N)

• SATA Accessories

One SATA backplane (BPN-SAS3-216A)

Twenty-four hot-swap drive carriers (MCP-220-00047-0B)

• One rackmount kit (MCP-290-00053-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://super-dev/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSTORAGESYSTEM 2027R-AR24NV User's Manual

1-2 Server Barebone Features

The 2027R-AR24NV is built around the X9DRH-iF-NV, a dual processor serverboard

based on the Intel C602 chipset and designed for mission critical storage applica-

tions that leverage system memory for a high performance caching. Non-Volatile

DIMM modules are supported to prevent data loss. Below are the main features of

the X9DRH-iF-NV. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X9DRH-iF-NV supports single or dual Intel® E5-2600 Series (Socket R) pro-

cessors in LGA 2011 sockets. Please refer to our web site for a complete listing of

supported processors (www.supermicro.com).

Memory

The X9DRH-iF-NV has sixteen DIMM slots that can support up to 512 GB of

ECC registered/unbuffered DDR3-1600/1066/800 memory as well as Non-Volatile

memory modules (NVDIMM) from vendors that use the ADR method of triggering.

Please refer to Chapter 5 for details on installing memory.

SATA

A SATA controller is integrated into the C602 chipset to provide a 6+4 port SATA

subsystem, which is RAID 0, 1, 10 and 5 capable. Two ports support SATA 3.0 (I-

SATA0/1) and 6+2 support SATA 2.0 (I-SATA2-5).

PCI Expansion Slots

The X9DRH-iF-NV has six PCI-E 3.0 x8 (in x16 slots), two PCI-E 3.0 x8 and one

PCI-E 3.0 x16 slots. Note that PCI-E slots 1, 2, and 3 are occupied by the IT Mode

disk controllers included with the server, leaving four PCI-E slots available for ad-

ditional add-on cards. The PCI slots are controlled by the CPU so some slots may

not be available when two CPUs are not installed on the board at the same time.

See the serverboard layout in Chapter 5 for details.

I/O Ports

The color-coded I/O ports include one COM port, a VGA (monitor) port, four USB,

two Ethernet LAN ports and a dedicated IPMI LAN port.

Table des matières

Autres manuels Supermicro Stockage

Supermicro

Supermicro 2028R-ACR24L Manuel utilisateur

Supermicro

Supermicro Supero 6037R-E1R16N Manuel utilisateur

Supermicro

Supermicro 6028R-E1CR12N Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR24L Manuel utilisateur

Supermicro

Supermicro Supero SC847DE16-R2K02JBOD Manuel utilisateur

Supermicro

Supermicro SuperServer SYS-211E-FRN2T Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR60N Manuel utilisateur

Supermicro

Supermicro 6027R-E1CR12N Manuel utilisateur

Supermicro

Supermicro SuperStorage 6028R-E1CR12H Manuel utilisateur

Supermicro

Supermicro SuperServer SSG-620P-E1CR24H Manuel utilisateur

Supermicro

Supermicro 6028R-E1CR12T Manuel utilisateur

Supermicro

Supermicro SuperServer 210P-FRDN6T Manuel utilisateur

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R48L Manuel utilisateur

Supermicro

Supermicro SuperServer 110C-FHN4T Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR36L Manuel utilisateur

Supermicro

Supermicro SSG-2028R-DN2R20L Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR36N Manuel utilisateur

Supermicro

Supermicro SuperServer SSG-121E-NE316R Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR24H Manuel utilisateur

Supermicro

Supermicro SuperServer SSG-640SP-E1CR60 Manuel utilisateur

Supermicro

Supermicro SUPERO SC847DJ Series Manuel utilisateur

Supermicro

Supermicro SuperServer SSG-540P-E1CTR45L Manuel utilisateur

Supermicro

Supermicro 6038R-E1CR16H Manuel utilisateur

Supermicro

Supermicro SuperStorage SSG-136R-NR32JBF Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur