Supermicro SuperStorage 6028R-E1CR12H Manuel utilisateur

SUPER STORAGE SYSTEM

6028R-E1CR12H

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: March 16, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the 6028R-E1CR12H. Installation

and maintainance should be performed by experienced technicians only.

The 6028R-E1CR12H is a high-end storage system based on the SC826BE1C-

R920LP 2U rackmountable chassis and the X10DRH-iT dual processor serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

system and describes the main features of the X10DRH-iT serverboard and the

SC826BE1C-R920LP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the 6028R-E1CR12H into a

rack and check out the server conguration prior to powering up the system. If your

server was ordered without processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

6028R-E1CR12H.

SUPERSTORAGESYSTEM 6028R-E1CR12H User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRH-iT serverboard, including

the locations and functions of connections, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when recong-

uring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC826BE1C-R920LP chassis.

You should follow the procedures given in this chapter when installing, removing or

reconguring SATA or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the BIOS utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Main Storage Controller .................................................................................. 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

Rear I/O Ports................................................................................................. 1-2

Onboard Graphics........................................................................................... 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Separating the Sections of the Rack Rails..................................................... 2-4

Installing the Inner Rail Extension .................................................................. 2-4

Outer Rack Rails............................................................................................. 2-6

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Power Fail ....................................................................................................... 3-2

Information LED .............................................................................................. 3-2

SUPERSTORAGESYSTEM 6028R-E1CR12H User's Manual

vii

NIC1 ................................................................................................................ 3-3

NIC2 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 Rear I/O Ports................................................................................................. 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an LGA2011 Processor.................................................................... 5-4

Installing a Passive CPU Heatsink ................................................................. 5-7

Removing the Heatsink................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-8

DIMM Installation ............................................................................................ 5-8

5-6 Adding PCI Expansion Cards ........................................................................5-11

5-7 Serverboard Details ...................................................................................... 5-12

X10DRH-iT Quick Reference ........................................................................ 5-13

5-8 Connector Denitions ................................................................................... 5-14

Table of Contents

viii

5-9 Jumper Settings ............................................................................................ 5-21

5-10 Onboard Indicators........................................................................................ 5-24

5-11 SATA Ports .................................................................................................... 5-25

5-12 Installing Software......................................................................................... 5-26

SuperDoctor® 5 ............................................................................................ 5-27

5-13 Onboard Battery............................................................................................ 5-28

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Accessing the Inside of the Chassis............................................................... 6-2

6-4 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans .................................................................................. 6-4

6-5 Air Shroud ....................................................................................................... 6-5

6-6 Drive Bay Installation/Removal ....................................................................... 6-6

Accessing the Drive Bays ............................................................................... 6-6

SAS/SATA Drive Installation............................................................................ 6-6

Hard Drive Backplane ..................................................................................... 6-8

6-7 Power Supply.................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Removing/Replacing the Power Supply.......................................................... 6-9

6-8 Attaching a JBOD Expansion Chassis...........................................................6-11

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-40

7-5 IPMI............................................................................................................... 7-42

7-6 Security Settings ........................................................................................... 7-44

7-7 Boot Settings................................................................................................. 7-45

7-8 Save & Exit ................................................................................................... 7-46

Appendix A BIOS POST Error Codes

Appendix B System Specications

SUPERSTORAGESYSTEM 6028R-E1CR12H User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperStorageSystem 6028R-E1CR12H is comprised of two main subsys-

tems: the SC826BE1C-R920LP 2U chassis and the X10DRH-iT dual processor

serverboard. Please refer to our website for information on operating systems that

have been certied for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 6028R-E1CR12H, as listed below:

•Two passive CPU heatsinks (SNK-P0048PS)

•Three 8-cm system fans (FAN-0126L4)

•One air shroud (MCP-310-29001-0N)

•SAS3/SATA3 Storage

One SATA backplane (BPN-SAS3-826EL1)

Twelve drive carriers (MCP-220-00075-OB)

•Hardware RAID Controller ( AOC-S3108L-H8IR)

•JBOD Expansion Port (AOM-SAS3-8I8E-LP)

•One rackmount kit (MCP-290-00053-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

•If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSTORAGESYSTEM 6028R-E1CR12H User's Manual

1-2 Serverboard Features

The SuperStorageSystem 6028R-E1CR12H is built around the X10DRH-iT, a dual

processor serverboard based on the Intel C612 chipset. Below are the main features

of the X10DRH-iT. (See Figure 1-1 for a block diagram of the chipset.)

Processors

The X10DRH-iT supports single or dual Intel® Xeon E5-2600 (v3) Series proces-

sors. Please refer to the serverboard description pages on our website for a com-

plete listing of supported processors (www.supermicro.com).

Memory

The X10DRH-iT has 16 DIMM slots that can support up to 1024 GB of Load Re-

duced (LRDIMM) or 512 GB of Registered (RDIMM) ECC DDR4-2133/1866/1600

memory. See Chapter 5 for details.

Main Storage Controller

An LSI 3108 controller card is included in the system to support up to 240 SATA

3.0/SAS 3.0 hard drives. (RAID 0, 1, 5, 6, 10, 50 and 60 supported). The SATA/

SAS drives are hot-swappable units.

Serial ATA

A SATA controller is integrated into the chipset to provide 10 SATA 3.0 (6/Gbps)

ports (I-SATA0-5 supported by the Intel PCH and a vertical. 4-port S-SATA con-

nection supported by the Intel SCU), which are RAID 0, 1 and 10 supported. The

SATA drives are hot-swappable units. (RAID 5 supported with Windows OS only.)

PCI Expansion Slots

The X10DRH-iT has six PCI-Express 3.0 x8 slots (CPU1 Slots 1-3 and CPU2 Slots

5-7) and one PCI-Express 3.0 x16 slot (CPU2 Slot4).

Rear I/O Ports

The I/O ports include one COM port, a VGA port, four USB (two USB 3.0 and two

USB 2.0), two 10G (TLAN) Ethernet ports and a dedicated IPMI LAN port. A UID

(Unit Identier) button and LED are also located beside the VGA port.

Table des matières

Autres manuels Supermicro Stockage

Supermicro

Supermicro 6048R-E1CR72L Manuel utilisateur

Supermicro

Supermicro SSG-2028R-DN2R20L Manuel utilisateur

Supermicro

Supermicro SuperServer SSG-620P-E1CR24H Manuel utilisateur

Supermicro

Supermicro 2028R-ACR24H Manuel utilisateur

Supermicro

Supermicro 6028R-E1CR12T Manuel utilisateur

Supermicro

Supermicro SuperStorage SSG-136R-NR32JBF Manuel utilisateur

Supermicro

Supermicro Supero SC847DE16-R2K02JBOD Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR24N Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR24H Manuel utilisateur

Supermicro

Supermicro Supero 6037R-E1R16N Manuel utilisateur

Supermicro

Supermicro 2028R-E1CR24L Manuel utilisateur

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R48L Manuel utilisateur

Supermicro

Supermicro 2028R-E1CR24H Manuel utilisateur

Supermicro

Supermicro SuperServer SSG-640SP-E1CR60 Manuel utilisateur

Supermicro

Supermicro SuperStorageSystem 6038R-E1CR16L Manuel utilisateur

Supermicro

Supermicro SuperServer SYS-211E-FRN2T Manuel utilisateur

Supermicro

Supermicro 6047R-E1R36N Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR36L Manuel utilisateur

Supermicro

Supermicro 2028R-ACR24L Manuel utilisateur

Supermicro

Supermicro SuperServer 210P-FRDN6T Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR60N Manuel utilisateur

Supermicro

Supermicro SC826 JBOD Manuel utilisateur

Supermicro

Supermicro 6048R-E1CR36N Manuel utilisateur

Supermicro

Supermicro SUPER 6047R-E1CR36N Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur