Supermicro TPM9670 Manuel utilisateur

TPM

AOM-TPM-9670V

AOM-TPM-9670H

AOM-TPM-9670V(H)-S

USER’S MANUAL

1.2

Manual Revision 1.2

Release Date: May 12, 2021

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this user’s guide has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this manual, or to notify

any person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: Refer to Supermicro's website for FCC Compliance Information.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproduc�veharm. Formore informa�on, go

to www.P65Warnings.ca.gov.

Preface

About This User's Guide

This user's guide is written for system integrators, IT professionals, and knowledge-

able end users who wish to add additional data security levels to their systems to

protect highly sensitive applications. It provides detailed information on conguring,

provisioning, and using the trusted platform module (TPM).

User's Guide Organization

Chapter 1 provides an overview of the trusted platform module (TPM), including

its features and uses.

Chapter 2 provides detailed instructions on installing, provisioning, and using the

TPM.

Conventions Used in This User's Guide

Pay special attention to the following symbols for proper TPM conguration.

Warning: Important information given to avoid TPM conguration errors.

Note: Additional information given to ensure correct TPM conguration

setup.

iii

Preface

Super TPM User's Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

Table of Contents

Preface........................................................................................................... 3

Chapter 1 Introduction..............................................................................1-1

1.1 Overview of the Trusted Platform Module (TPM) ........................................... 1-1

1.2 Supermicro TPM Features .............................................................................. 1-2

1.3 Motherboards Supported for TPM .................................................................. 1-3

1.4 Intel®TXT ........................................................................................................ 1-3

1.5 An Important Note to the User........................................................................ 1-3

Chapter 2 Deploying and Using the TPM ............................................... 2-1

2.1 Installing the TPM Onto the Motherboard....................................................... 2-1

2.2 Enabling the TPM via the BIOS and Intel®Provision Utility ........................... 2-2

Super TPM User's Manual Chapter 1: Introduction

1-1

Chapter 1

Introduction

1.1 Overview of the Trusted Platform Module (TPM)

The Trusted Platform Module (TPM9670) is a special add-on module that may be

installed onto Supermicro X11 Dual Processor boards, and single Processor boards

with socket 3647 only.

A. Types of TPMs

Note: TPM module must be provisioned in order to use Intel®TXT. Please

contact Supermicro Technical Support to get more details about the Intel

tool.

The TPM-9670 series uses TCG (Trusted Computing Group) version 2.0 rmware.

The following SKUs are available:

• AOM-TPM-9670V, a vertical TPM module

• AOM-TPM-9670H, a horizontal TPM module

Horizontal vs. Vertical: Generally, whether you should use a TPM with a horizontal

or vertical form factor depends on the physical space available. Horizontal TPMs

are used in 1U chassis. Vertical TPMs are used in 2U or taller chassis heights; they

are also designed with a smaller footprint to occupy less space on the motherboard.

Server vs. Client: To use the TXT function, each TPM has been provisioned as a

server model or client model. Be sure to use the appropriate TPM for your needs.

The server TPM is designed to run with Intel socket P (LGA 3647). The client TPM

is designed to run on Intel with socket P (LGA 3647) as well.

Super TPM User's Manual Chapter 1: Introduction

1-2

1.2 Supermicro TPM Features

1. TCG 2.0 compliance

2. SPI interface

3. Microcontroller in 0.22/0.09-µm CMOS technology

4. Compliant embedded software

5. EEPROM for TCG rmware enhancements and for user data and keys

6. Hardware accelerator for SHA-1 and SHA-256 hash algorithm

7. True Random Number Generator (TRNG)

8. Tick counter with tamper detection

9. Protection against dictionary attack

10. Inneon's TPM 2.0 is Common Criteria certied at Evaluation Assurance

Level (EAL) 4 Moderate

11. General-purpose I/O

12. Intel®Trusted Execution Technology (TXT) support

13. AMD®Secure Virtual Machine Architecture support

14. Full personalization with Endorsement Key (EK) and EK certicate

15. Power-saving sleep mode

16. 3.3V power supply

17. WHQL dual-mode 1.1b + 1.2 TPM Windows Kernel Mode Driver

Super TPM User's Manual Chapter 1: Introduction

1-3

1.3 Motherboards Supported for TPM

Please refer to the Supermicro website (http://www.supermicro.com/) for a com-

plete and most up-to-date list of the motherboards that can support the TPM. As a

general rule, these are most X9 motherboards, all X10 motherboards, and some

AMD motherboards. Such motherboards will have a specially designated JTPM1

connector, which will be listed in the respective motherboard's manual.

1.4 Intel®TXT

The Intel TXT is a software tool that may be used in conjunction with the TPM to

provide additional security for pre-launch rmware of clusters and clouds, including

the BIOS, IPMI, SAS rmware, CMM rmware, and more. It is optional, but the TPM

is required for it to be provisioned. It further increases system security by protecting

rmware against malicious attacks to vulnerable areas.

It works by matching hypervisor measures with encryption keys upon system launch.

If the hypervisor does not match the keys, then the hypervisor will be prevented

from starting up.

To use the TXT, you need to enable TXT support after provisioning the TPM.

Note: TXT is only supported on Intel platforms that support TPM use.

A. How the TXT Works

The Intel TXT, when enabled, follows a step-by-step process to ensure security of

pre-launch components.

1. Measures the hypervisor launch upon system startup

2. Checks for a match

3. If matched: The TXT signals "trusted," and the launch is allowed to proceed.

4. If mismatched: The TXT signals "untrusted," and the launch is blocked.

1.5 An Important Note to the User

The graphics shown in this user's guide were based on the latest information

available at the time of publishing of this guide. The TPM screens shown on your

computer may or may not look exactly like the screen shown in this user's guide.

2-1

Super TPM User's Manual Chapter 2: Deploying and Using the TPM

Chapter 2

Deploying and Using the TPM

Follow the instructions below to begin using the TPM.

2.1 Installing the TPM Onto the Motherboard

To install the Trusted Platform Module onto your motherboard, follow the steps

below.

1. Find the 9-pin male JTPM1 connector on the motherboard. If you need help

locating this connector, consult your motherboard manual. If the board does

not have this feature, then it does not support the TPM.

2. Using the key pin as a reference, orient and align your TPM with the connec-

tor.

key pin

3. Carefully insert the TPM into the connector on the motherboard, taking care

not to damage the pins.

Note: The orientation of the TPM to be installed depends on whether it

has a horizontal or vertical form factor. The vertical TPM is intended to

"stand" perpendicular to the motherboard, while the horizontal TPM lies

at (parallel) on the motherboard. See the below two images for the cor-

rect orientation.

Horizontal TPM Vertical TPM

2-2

Super TPM User's Manual Chapter 2: Deploying and Using the TPM

2.2 Enabling the TPM via the BIOS and Intel®Provision Utility

There are two components to the process of enabling the TPM. After you have

installed the TPM onto the motherboard, you must rst "verify" the TPM for the

motherboard; this is done through the BIOS. (Also in the BIOS, you should enable

TXT support.) After that, you then "lock" the TPM in the rmware. This is done

through the provision utility provided by Intel.

A. Enabling the TPM in the BIOS

1. Enter the BIOS setup screen. You may do this either from the IPMI remote

console or from the server directly using KVM. Reboot the system, and press

the <Del> key as the system boots until you reach the BIOS screen.

2. You will be presented with the BIOS Setup main screen. Using your arrow

keys, navigate to the "Advanced"tab. From there, navigate down and select

the "CPU Conguration" option. Press <Enter>.

3. You will then be taken to the CPU Conguration page. Using your arrow keys,

navigate down to the "Intel Virtualization Technology" option, as shown

below, and press <Enter>. If this item is not already enabled, select Enable

and press <Enter>.

4. Once you have enabled virtualization support, press your <Esc> key until you

are back to the "Advanced" tab. Navigate down to the "Trusted Computing"

option and press <Enter>.

5. The Trusted Computing window will appear.

Note: "SHA-1 PCR Bank" and "SHA-256 PCR Bank” are Enabled.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Supermicro Unité de contrôle

Supermicro

Supermicro SBI-4429P-T2N Manuel utilisateur

Supermicro

Supermicro SBI-7147R-S4X Manuel utilisateur

Supermicro

Supermicro SuperBlade SBI-4129P-T3N Manuel utilisateur

Supermicro

Supermicro AOC-ATG-i2S Manuel utilisateur

Supermicro

Supermicro AOC-ATG-i2T2SM Manuel utilisateur

Supermicro

Supermicro AOC-A100G-b2CM Manuel utilisateur

Supermicro

Supermicro MicroBlade MBI-6218G-T81X Manuel utilisateur

Supermicro

Supermicro AOC-AH25G-m2S2TM Manuel utilisateur

Supermicro

Supermicro SBM-25G-P10 Manuel utilisateur

Supermicro

Supermicro MCP-220-00119-0B Manuel utilisateur

Supermicro

Supermicro SuperBlade SBI-6119P-T3N Manuel utilisateur

Supermicro

Supermicro MicroBlade 6119M-T2N Manuel utilisateur

Supermicro

Supermicro SBI-6129P-T3N Manuel utilisateur

Supermicro

Supermicro SBA-7121M-T1 Manuel utilisateur

Supermicro

Supermicro MicroBlade MBI-6119G-C4 Manuel utilisateur

Supermicro

Supermicro MBI-6128R-T2 Manuel utilisateur

Supermicro

Supermicro MicroBlade MBI-6219G-T7LX Manuel utilisateur

Supermicro

Supermicro MicroBlade MBI-6118G-T81X Manuel utilisateur

Supermicro

Supermicro MicroBlade MBI-6119G-C2 Manuel utilisateur

Supermicro

Supermicro MBI-6418A-T5H Manuel utilisateur

Supermicro

Supermicro Supero SAS-836TQ Manuel utilisateur

Supermicro

Supermicro MicroBlade MBI-6118D-T2 Manuel utilisateur

Supermicro

Supermicro MicroBlade MBI-6119M-C2 Manuel utilisateur

Supermicro

Supermicro MicroBlade MBI-6118G-T41X Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur