Supermicro SC815 series Manuel utilisateur

SC815 X9 Universal Air Shroud

User’s Guide

Revison 1.0

SC815 Air Shroud User’s Guide

The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and documentation

may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or

machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

Manual Revison 1.0

Release Date: October 11, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS

PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE

STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER

REPRODUCTIVE HARM.

iii

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Product Checklist of Typical Components.....................................1-1

1-3 Features..............................................................................................1-2

1-4 Returning Merchandise for Service................................................1-2

1-5 Contacting Supermicro.....................................................................1-3

Chapter 2 System Safety..................................................................2-1

2-1 Electrical Safety Precautions...........................................................2-1

2-2 General Safety Precautions.............................................................2-2

2-3 Electrostatic Discharge Precautions ..............................................2-2

2-4 Operating Precautions......................................................................2-2

Chapter 3 Configuration and Installation...............................3-1

3-1 Overview.............................................................................................3-1

3-2 SC815 X9 Universal Air Shroud Components..............................3-1

Component Part B ..................................................................................3-3

Component Part C..................................................................................3-4

Component Part D..................................................................................3-5

3-3 Removing Breakable Tabs for Cabling..........................................3-6

3-4 Configuring the SC815 X9 Universal Air Shroud.........................3-7

3-5 Installing the SC815 X9 Universal Air Shroud..............................3-9

SC846 Air Shroud User’s Guide

Notes

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of Supermicro's SC815 X9 universal air shroud. Installation and

maintenance should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the SC815

X9 universal air shroud and describes its main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing the SC815 X9

universal air shroud.

Chapter 3: Configuration and Installation

Refer here for details on installing and configuring the SC815 X9 universal air shroud on

a computer system mainboard.

SC815 Air Shroud User’s Guide

Notes

1-1

Chapter 1

Introduction

1-1 Overview

The SC815 X9 universal air shroud is a configurable air shroud for system mainboards

to enable maximum efficient air flow through the system. It can be configured to fit

different sized system mainboards of the same general shape and size.The SC815 X9

universal air shroud is optimized for use with Supermicro SC815 series chassis designs

and for Supermicro X8DTx/X9DRx/H8DGx series mainboards. See Chapter 3 for

configuration details.

1-2 Product Checklist of Typical Components

The SC815 X9 universal air shroud comes packaged with one of two sets components

and parts based upon the size(s) of its targeted motherboard. These packaged sets are

the same except that package MCP-310-19001-0N contains Component Parts

MCP-310-18006-1N (Part B) and MCP-310-18007-1N (Part C), which are used for

either 13.68” x13” or 12” x 13” motherboards. Package MCP-310-19002-0N contains

component part MCP-310-18006-1N (Part B), which is only used for 12” x 13”

motherboards. Both of these movable parts are installed in the same general location,

but only one of these parts may be installed there. The list of available parts and

components for each package are shown in Table 1-1 and Table 1-2.

Table 1-1. SC815 MCP-310-19001-0N Package Parts and Components

Part Number Description Quantity

MCP-310-19001-0N SC815/SC113/SC116 Intel DP X9 universal PC air shroud 13.68”x13/12”x13”

motherboard

MCP-310-19004-1N SC815/SC113/SC116 X9 universal air shroud component, main

body (Part A) 1

MCP-310-18006-1N SC815/SC113 X8 universal air shroud component, moving part

(Part B) (for 12” x 13” motherboard use only) 1

MCP-310-18007-1N SC815/SC113 X8 air shroud universal component, moving part

(Part C) (for 13.68” x 13” motherboard use only) 1

MCP-310-19005-1N SC815/SC113/SC116 X9 universal air shroud component,

moving part (part D) 1

SC815 Air Shroud User’s Guide

1-2

1-3 Features

The SC815 X9 universal air shroud includes the following features:

• Main air shroud component

• Four detachable components for creating multiple configurations

• Breakable tabs for power cable management

• Clear plastic material construction for ease of viewing

1-4 Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your vendor for

a Returned Merchandise Authorization (RMA) number. When returning to the

manufacturer, the RMA number should be prominently displayed on the outside of the

shipping carton, and mailed prepaid or hand-carried. Shipping and handling charges will

be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online at:

http://www. supermicro.com/support/rma/

Whenever possible, repack the chassis in the original Supermicro carton, using the

original packaging material. If these are no longer available, be sure to pack the chassis

securely, using packaging material to surround the chassis so that it does not shift within

the carton and become damaged during shipping.

This warranty only covers normal consumer use and does not cover damages incurred

in shipping or from failure due to the alteration, misuse, abuse or improper maintenance

of products.

During the warranty period, contact your distributor first for any product problems.

Table 1-2. SC815 MCP-310-19002-0N Package Parts and Components

Part Number Description Quantity

MCP-310-19002-0N SC815/SC113/SC116 Intel DP X9 universal PC air shroud 12”x13” motherboard

MCP-310-19004-1N SC815/SC113/SC116 X9 universal air shroud component, main

body (Part A) 1

MCP-310-18006-1N SC815/SC113 X8 universal air shroud component, moving part

(Part B) (for 12” x 13” motherboard use only) 1

MCP-310-19005-1N SC815/SC113/SC116 X9 universal air shroud component,

moving part (part D) 1

NOTE: The default configuration is for Component Parts A, B or C, and D to all

be connected. Each individual part for the SC815 X9 universal air shroud is

labeled with its component part letter for easy identification.

1-3

Chapter 1: Introduction

1-5 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

‘s-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email:

[email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacific

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: +886-(2) 8226-5990

SC815 Air Shroud User’s Guide

1-4

Notes

Autres manuels pour SC815 series

Table des matières

Autres manuels Supermicro Matériel informatique

Supermicro

Supermicro B3SD1-20C-25G Manuel utilisateur

Supermicro

Supermicro FatTwin F620P3-RTBN Manuel utilisateur

Supermicro

Supermicro SuperWorkstation SYS-551A-T Manuel utilisateur

Supermicro

Supermicro AOC-S3816L-L16iR Manuel utilisateur

Supermicro

Supermicro X13SRN-H Manuel utilisateur

Supermicro

Supermicro SuperBlade SBA-4114S-C2N Manuel utilisateur

Supermicro

Supermicro AOC-USAS-S4i Manuel utilisateur

Supermicro

Supermicro AOC-SLG3-4E4R Manuel utilisateur

Supermicro

Supermicro A3SSV-8C-SPLN10F Manuel utilisateur

Supermicro

Supermicro AOC-AG-i4S Manuel utilisateur

Supermicro

Supermicro BPN-SAS3-LA26A-N12 Manuel utilisateur

Supermicro

Supermicro AOC-S25G6-M2S Manuel utilisateur

Supermicro

Supermicro AOC-IBH-X6HS Manuel utilisateur

Supermicro

Supermicro BPN-SAS3-826A Backplane Manuel utilisateur

Supermicro

Supermicro SuperServer 120H-TNR Manuel utilisateur

Supermicro

Supermicro X12SPO-NTF/-F Manuel utilisateur

Supermicro

Supermicro AOC-SLG3-4X4P Manuel utilisateur

Supermicro

Supermicro SuperBlade SBI-420P-4T2N Manuel utilisateur

Supermicro

Supermicro SuperStorage SSG-1129P-ACR10N4L Manuel utilisateur

Supermicro

Supermicro AOC-B25G-6CVL Manuel utilisateur

Supermicro

Supermicro SBI-7127RG Manuel utilisateur

Supermicro

Supermicro AOC-A25G-i4SM Manuel utilisateur

Supermicro

Supermicro 530AD-I Manuel utilisateur

Supermicro

Supermicro X13SAN-H Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur