Average beam Angle 111.6°
7
Installation
Fix the LED street light on the pole first. Connect right the out-going wire of street lights according to the
requirements.After check everything is ready, connect to the powerful supply. Then the street light can work
properly. he installation steps as follow:
1. Fix pole connector with allocated rotary connector. Put the cable line inside the electric box of light. Fix the
light completely on the pole.
2. Connect the light cable line with power supply according the connecting marks.
AC Input Connecting Mark：N L
N：Zero Line : Ground Line L：Live Line
DC Input Connecting Mark：DC+ DC-
DC+: anode DC-: cathode
K：half power control terminal（alternative when need）
K+：half power control anode；K-：half power control cathode
3. Close electric box, screw on, pay attention: do not press on cable.
8Transport and Storage
R
equirements
1. The package for street light is carton. People should avoid serious impacting, insolating and drenching
when transporting. The package cannot be serious bumped, turned over, threw, rolled or pressed.
2. Reserve the street light in the place which is cool, dry and clean
9
Open Package and Check
1 .Check whether the carton of the light is good before open.
2. There is one certification and one introduction to each light. Check whether the part of light is in good
condition.
3. Check whether the connector and screw of the light are loose or not.
10
Caution
1. Read the manual carefully before using the light in order to avoid accidents and consequential damages.
2. Lighting wiring must be in strict accordance with the instructions in "Use and Installation" instructions,
reverse connecting is strictly prohibited .
3. The product is designed to be maintenance-free. Under normal circumstances,
servicing is not needed. Please contact us if the product needs servicing.
4 .Please check the product carefully before using it. If anything abnormal happens in using, please contact
