Sun Microsystems Sun Netra CP3260 Manuel utilisateur

Sun Microsystems, Inc.

www.sun.com

Submit comments about this document at: http://www.sun.com/hwdocs/feedback

Sun Netra™CP3260Blade Server

User’s Guide

Part No. 820-0457-11

April 2009, Revision 01

Please

Recycle

This distribution may include materials developed by third parties.

Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in

the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd.

Sun, Sun Microsystems, the Sun logo, Netra, Sun Ray, the Netra logo and the Solaris logo are trademarks or registered trademarks of Sun

Microsystems, Inc., and its subsidiaries, in the U.S. and other countries.

All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the U.S. and other

countries. Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems, Inc.

Use of any spare or replacement CPUs is limited to repair or one-for-one replacement of CPUs in products exported in compliance with U.S.

export laws. Use of CPUs as product upgrades unless authorized by the U.S. Government is strictly prohibited.

DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,

ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.

Cette distribution peut comprendre des composants développés par des tierces parties.

Des parties de ce produit pourront être dérivées des systèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marque

déposée aux Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd.

Sun, Sun Microsystems, le logo Sun, Netra, Sun Ray, le logo Netra et le logo Solaris sont des marques de fabrique ou des marques déposées de

Sun Microsystems, Inc. ou ses ﬁliales, aux Etats-Unis et dans d’autres pays.

Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.

aux Etats-Unis et dans d’autres pays. Les produits portant les marques SPARC sont basés sur une architecture développée par Sun

Microsystems, Inc.

see above L’utilisation de pieces detachees ou d’unites centrales de remplacement est limitee aux reparations ou a l’echange standard d’unites

centrales pour les produits exportes, conformement a la legislation americaine en matiere d’exportation. Sauf autorisation par les autorites des

Etats-Unis, l’utilisation d’unites centrales pour proceder a des mises a jour de produits est rigoureusement interdite.

LA DOCUMENTATION EST FOURNIE "EN L’ETAT" ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES

OU TACITES SONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT

TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L’APTITUDE A UNE UTILISATION PARTICULIERE OU A

L’ABSENCE DE CONTREFACON.

iii

Contents

Preface xiii

1. Introduction 1–1

1.1 Overview 1–1

1.2 Features 1–2

1.3 System Configurations 1–8

1.4 Advanced Rear Transition Modules 1–11

1.5 Hot-Swap Support 1–14

1.6 System Requirements and Options 1–14

1.6.1 Hardware Requirements and Options 1–14

1.6.2 Software Requirements 1–15

1.7 Technical Support and Warranty 1–15

1.7.1 Part Number, Serial Number, and Revision Number

Identification 1–16

2. Hardware Installation 2–1

2.1 Equipment and Operator Safety 2–1

2.2 Materials and Tools Required 2–3

2.3 Preparing for the Installation 2–3

2.3.1 Checking Power, Thermal, Environmental, and Space

Requirements 2–3

iv Netra CP3260 Blade Server User’s Guide • April 2009

2.4 Installation Procedure Summary 2–4

2.5 Configuring On-Board Hardware 2–5

2.5.1 Adding or Replacing FB-DIMM Memory Modules 2–5

2.5.1.1 To Remove FB-DIMM Memory Modules 2–10

2.5.1.2 To Install FB-DIMM Memory Modules 2–11

2.5.2 Adding or Replacing Compact Flash Card 2–13

2.5.3 Adding or Replacing TOD Clock Battery 2–14

2.6 Installing an Advanced Rear Transition Module (Optional) 2–18

2.7 Installing the Netra CP3260 Blade Server 2–21

2.8 Connecting External I/O Cables 2–23

2.9 Hot-Swapping the Netra CP3260 Blade Server 2–25

3. Software Installation 3–1

3.1 Operating Systems and Patches 3–1

3.2 Configuring Payload OS NIU Driver for Multiplexing to Zones 2 and 3 3–

3.3 Installing as a Diskless Clients 3–4

3.3.1 Creating a Boot Server for Diskless Clients 3–4

3.3.2 Adding a Diskless Client 3–5

3.3.3 Determining Local Network IP Addresses and Host Names 3–7

3.4 Firmware Updates 3–8

3.5 Configuring for 1-GbE or 10-GbE Switches 3–8

3.6 Downloading and Installing SunVTS Software 3–9

3.7 Formatting the Optional Compact Flash Card 3–10

4. Firmware and Blade Server Management 4–1

4.1 System Firmware 4–2

4.2 Power-On Self-Test Diagnostics 4–3

4.2.1 POST Test Coverage 4–3

4.2.2 POST Diagnostic and Error Message Format 4–4

Contents v

4.3 OpenBoot Firmware 4–4

4.3.1 Getting to the ok Prompt 4–5

4.3.2 Auto-Boot Options 4–6

4.3.3 OpenBoot Commands 4–6

4.3.3.1 probe-scsi and probe-scsi-all Commands 4–7

4.3.3.2 probe-ide Command 4–8

4.3.3.3 show-devs Command 4–8

4.3.3.4 Using watch-net and watch-net-all Commands to

Check the Network 4–11

4.3.4 OpenBoot Configuration Variables 4–12

4.3.4.1 Viewing and Setting OpenBoot Configuration

Variables 4–14

4.4 Error Handling Summary 4–15

4.5 Automatic System Recovery 4–16

4.5.1 Enabling and Disabling Automatic System Recovery 4–17

4.5.1.1 To Enable Automatic System Recovery 4–17

4.5.1.2 To Disable Automatic System Recovery 4–17

4.6 Network Device Aliases 4–18

4.7 Retrieving Device Information 4–19

4.8 Multiplexing to Zones 2 and 3 4–27

5. Hardware Functional Descriptions 5–1

5.1 Hardware Architecture 5–1

5.1.1 UltraSPARC T2 Processor and Memory 5–2

5.1.2 I/O 5–3

5.1.3 Base and Fabric Interfaces 5–3

5.1.4 Additional I/O 5–3

5.1.5 Power PC 5–3

5.1.6 ARTM Support 5–4

5.2 Hardware Modules 5–4

vi Netra CP3260 Blade Server User’s Guide • April 2009

5.2.1 UltraSPARC T2 Processor 5–4

5.2.1.1 Electronic Fuse 5–7

5.2.1.2 Cores 5–8

5.2.1.3 L2 Cache 5–8

5.2.1.4 Memory Controller 5–8

5.2.1.5 I/O Interface 5–8

5.2.2 Memory Subsystem 5–9

5.2.2.1 Memory Capacity 5–9

5.2.2.2 Memory Speed 5–9

5.2.3 I/O Subsystem 5–9

5.2.3.1 PCI Express Switch 5–10

5.2.3.2 Base Interface 5–10

5.2.3.3 Fabric Interface 5–10

5.2.3.4 Common ARTM 5–10

5.2.4 Other ARTM Interfaces 5–11

5.2.4.1 Serial Ports 5–11

5.2.4.2 Ethernet Management Port 5–11

5.2.5 Front Panel I/O 5–11

5.2.5.1 Ethernet Management Port 5–11

5.2.5.2 Serial Port 5–11

5.2.5.3 Dual USB Ports 5–12

5.2.6 Compact Flash Socket 5–12

5.2.7 Service Processor MPC885 5–12

5.2.7.1 Field-Programmable Gate Array 5–12

5.2.8 Intelligent Platform Management Controller 5–13

5.2.8.1 Intelligent Platform Management Bus 5–14

5.2.8.2 Interface to the PPC 5–14

5.2.8.3 IPMB-L Interface 5–14

Contents vii

5.2.8.4 ATCA Hot-Swap Latch 5–14

5.2.8.5 LEDs 5–15

5.2.8.6 Power Control 5–15

5.2.8.7 System Monitor (ADM1026) and Thresholds 5–15

5.2.8.8 FRUID PROMs 5–17

5.2.9 I/O Subsystem Resets 5–17

5.2.10 ATCA Power Module (−48V to 12V) 5–18

5.2.11 TOD Clock Battery 5–18

A. Physical Characteristics A–1

A.1 Form Factor A–1

A.2 Layout A–1

A.3 Front Panel A–3

A.3.1 Visual Indicators A–3

A.3.2 Ports A–3

A.4 Connectors and Pinout A–3

A.4.1 Front Panel Connectors A–3

A.4.1.1 Ethernet Port A–4

A.4.1.2 Dual USB Port A–4

A.4.1.3 Serial Port A–5

A.4.2 Compact Flash Connector A–6

A.4.3 Midplane Power Connector (Zone 1) A–6

A.4.4 Data Transport Connector (Zone 2) A–8

A.4.5 Sun Netra ARTM Connectors (Zone 3) A–10

A.4.6 TOD Clock Battery Holder A–13

B. Sun OEM IPMI Commands B–1

B.1 Get Version Command B–2

B.2 Get RTM Status Command B–3

viii Netra CP3260 Blade Server User’s Guide • April 2009

B.3 Solaris OS Graceful Shutdown Commands B–4

B.4 Send Sensor State Command B–5

Index Index–1

Figures

FIGURE 1-1 Netra CP3260 Blade Server Front Panel 1–4

FIGURE 1-2 Netra CP3260 Blade Server (Top View) 1–5

FIGURE 1-3 Netra CP3260 Blade Server in an ATCA Shelf Enclosure 1–9

FIGURE 1-4 Netra CP3260 Blade Server, Midplane, and Netra CP32x0 ARTM 1–12

FIGURE 1-5 Netra CP3260 Blade Server Barcode Labeling 1–17

FIGURE 2-1 FB-DIMM Memory Locations 2–6

FIGURE 2-2 Removing an FB-DIMM Memory Module 2–11

FIGURE 2-3 Installing a FB-DIMM Memory Module 2–12

FIGURE 2-4 Compact Flash Card Location 2–14

FIGURE 2-5 TOD Battery Location 2–16

FIGURE 2-6 Installing a Netra CP32X0 ARTM 2–19

FIGURE 2-7 Installing Blade Server Into Chassis Slot 2–22

FIGURE 2-8 Netra CP3260 Blade Server Latches and Locking Screws 2–23

FIGURE 2-9 Hot-Swap Latch and Hot-Swap LED 2–26

FIGURE 5-1 Netra CP3260 Blade Server Block Diagram 5–2

FIGURE 5-2 UltraSPARC T2 Multicore Processor Block Diagram 5–5

FIGURE A-1 Netra CP3260 Blade Server Layout A–2

FIGURE A-2 Ethernet RJ-45 Connector A–4

FIGURE A-3 Dual USB Connector A–5

FIGURE A-4 Front Panel Serial Port Diagram A–6

xNetra CP3260 Blade Server User’s Guide • April 2009

FIGURE A-5 Power Distribution Connector (Zone 1) P10 A–7

FIGURE A-6 Zone 2 Connectors A–9

FIGURE A-7 Zone 3 Signal Connectors A–10

FIGURE A-8 Zone 3 Power Connector A–12

FIGURE A-9 TOD Battery Location A–14

Table des matières

Autres manuels Sun Microsystems Serveur

Sun Microsystems

Sun Microsystems Sun Enterprise 220R Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire V20z Manuel de programmation

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Enterprise 220R Manuel

Sun Microsystems

Sun Microsystems Sun Fire V490 Mode d’emploi

Sun Microsystems

Sun Microsystems Netra X4200 M2 Manuel utilisateur

Sun Microsystems

Sun Microsystems SunSwift SPARCserver 1000 Manuel utilisateur

Sun Microsystems

Sun Microsystems Fire 6800 Manuel utilisateur

Sun Microsystems

Sun Microsystems Enterprise 4000 Manuel d'instructions d'installation

Sun Microsystems

Sun Microsystems SPARC T5120 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire 880 Manuel d'instructions d'installation

Sun Microsystems

Sun Microsystems Netra t1 105 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M8000 Manuel de service

Sun Microsystems

Sun Microsystems SPARC T5120 Manuel utilisateur

Sun Microsystems

Sun Microsystems Ultra 30 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire T1000 Manuel utilisateur

Sun Microsystems

Sun Microsystems Fire 6800 Mode d’emploi

Sun Microsystems

Sun Microsystems Sun Fire E6900 Manuel utilisateur

Sun Microsystems

Sun Microsystems Blade X6450 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Manuel d'installation et d'exploitation

Sun Microsystems

Sun Microsystems Netra 440 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire X4140 Manuel d'installation et d'exploitation

Sun Microsystems

Sun Microsystems Sun Fire T2000 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur