Sun Microsystems Sun Netra CP3250 Manuel utilisateur

Sun Microsystems, Inc.

www.sun.com

Submit comments about this document at: http://www.sun.com/hwdocs/feedback

Sun Netra™CP3250

Blade Server User’s Guide

Part No. 820-5195-11

April 2009, Revision 01

Please

Recycle

This distribution may include materials developed by third parties.

Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in

the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd.

Sun, Sun Microsystems, the Sun logo, Netra, Sun Ray, the Netra logo and the Solaris logo are trademarks or registered trademarks of Sun

Microsystems, Inc., or its subsidiaries, in the U.S. and other countries.

All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the U.S. and other

countries. Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems, Inc.

Use of any spare or replacement CPUs is limited to repair or one-for-one replacement of CPUs in products exported in compliance with U.S.

export laws. Use of CPUs as product upgrades unless authorized by the U.S. Government is strictly prohibited.

DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,

ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.

Cette distribution peut comprendre des composants développés par des tierces parties.

Des parties de ce produit pourront être dérivées des systèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marque

déposée aux Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd.

Sun, Sun Microsystems, le logo Sun, Netra, Sun Ray, le logo Netra et le logo Solaris sont des marques de fabrique ou des marques déposées de

Sun Microsystems, Inc., ou ses ﬁliales, aux Etats-Unis et dans d’autres pays.

Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.

aux Etats-Unis et dans d’autres pays. Les produits portant les marques SPARC sont basés sur une architecture développée par Sun

Microsystems, Inc.

L’utilisation de pieces detachees ou d’unites centrales de remplacement est limitee aux reparations ou a l’echange standard d’unites centrales

pour les produits exportes, conformement a la legislation americaine en matiere d’exportation. Sauf autorisation par les autorites des Etats-

Unis, l’utilisation d’unites centrales pour proceder a des mises a jour de produits est rigoureusement interdite.

LA DOCUMENTATION EST FOURNIE "EN L’ETAT" ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES

OU TACITES SONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT

TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L’APTITUDE A UNE UTILISATION PARTICULIERE OU A

L’ABSENCE DE CONTREFACON.

iii

Contents

Preface xiii

1. Overview 1–1

1.1 Overview 1–2

1.2 Features 1–2

1.3 Physical Description 1–4

1.3.1 Front Panel Components 1–4

1.3.2 Blade Server Diagram 1–6

1.4 System Configurations 1–7

1.4.1 AMC 1–8

1.4.2 Advanced Rear Transition Module 1–8

1.5 Hot-Swap Support 1–11

1.6 System Components 1–11

1.6.1 Required Hardware Components 1–11

1.6.2 Optional Hardware Components 1–12

1.6.3 Software Components 1–12

1.7 Technical Support and Warranty 1–13

1.7.1 Locating the Part Number and Serial Number Information 1–13

1.7.2 Viewing the Electronic Blade Server ID Information 1–14

iv Sun Netra CP3250 Blade Server User’s Guide • April 2009

2. Hardware Installation and Service 2–1

2.1 Safety and Tool Requirements 2–2

2.1.1 Equipment and Operator Safety 2–2

2.1.2 Materials and Tools Required 2–3

2.2 Installing the Blade Server 2–4

2.2.1 Preparing for the Installation 2–4

2.2.1.1 Check Power, Thermal, Environmental, and Space

Requirements 2–4

2.2.1.2 Local Network IP Addresses and Host Names

Worksheet 2–5

2.2.1.3 Installation Procedure Summary 2–6

2.2.2 Configuring the Hardware 2–6

2.2.2.1 Verify Chassis Fan Tray Upgrade 2–6

2.2.2.2 Installing Optional Components 2–7

2.2.2.3 Configuring the Advanced Rear Transition Module

(ARTM) 2–7

2.2.3 Installing the Netra CP3250 Blade Server in an ATCA Shelf 2–8

2.2.3.1 Installing an Advanced Rear Transition Module

(ARTM) 2–8

2.2.3.2 Installing the Blade Server Into the Shelf 2–11

2.2.4 Connecting External I/O Cables 2–13

2.2.4.1 Connecting Cables to a System Console Running the

Solaris OS 2–13

2.2.4.2 Connecting Cables to the System Console Not Running

the Solaris OS 2–15

2.2.4.3 Netinstall Boot Device Map 2–15

2.3 Service Procedures 2–17

2.3.1 Hot-Swapping the Netra CP3250 Blade Server 2–17

2.3.2 Powering Off the Netra CP3250 Blade Server 2–17

2.3.3 Removing the Netra CP3250 Blade Server 2–18

2.3.4 Powering On the System 2–18

Contents v

2.3.5 Automatic Power-Off Events 2–18

2.3.6 Servicing DIMMs 2–19

2.3.6.1 DIMM Requirements 2–19

2.3.6.2 Installing a DDR2 DIMM 2–21

2.3.6.3 Removing a DDR2 DIMM 2–23

2.3.7 Installing the Optional Compact Flash Card 2–24

2.3.8 Installing Optional AMC 2–27

2.3.9 Adding or Replacing the Battery 2–30

2.3.10 Changing Jumper Settings 2–31

2.3.10.1 Clearing the CMOS Setting Using Jumper 2 2–31

2.3.10.2 Changing the OOS LED Color Using Jumper 13 2–32

2.3.11 Checking DIP Switch Settings 2–33

2.3.12 Resetting the Netra CP3250 Blade Server 2–34

3. Hardware Architecture 3–1

3.1 Block Diagram 3–2

3.2 Intel Processors 3–3

3.3 Intel San Clemente MCH 3–3

3.4 Memory 3–4

3.5 Networking and I/O 3–5

3.5.1 ICH9 I/O Controller Hub 3–5

3.5.2 PCI Express Bus 3–5

3.5.3 LPC Bus Interface 3–6

3.5.4 Redundant BIOS 3–6

3.5.5 Trusted Platform Module (TPM) 3–7

3.5.6 IPMC 3–7

3.5.7 RS-232 Serial Ports 3–7

3.5.8 Broadcom 5715C Gigabit Ethernet 3–8

vi Sun Netra CP3250 Blade Server User’s Guide • April 2009

3.5.9 Sun Dual 10-Gbit Ethernet/Quad 1-Gbit RGMII Network Interface

Chip 3–8

3.6 I/O Components 3–8

3.6.1 AMC Slot 3–8

3.6.2 EIDE/ATA for Compact Flash 3–9

3.6.3 SAS/SATA 3–9

4. Software Configuration 4–1

4.1 Operating Systems 4–2

4.2 Software Updates 4–2

4.3 SunVTS Software 4–3

4.4 Configuring Sun Netra CP3250 blade server For 1 GbE or 10 GbE

Switches 4–4

5. Configuring and Using BIOS Firmware 5–1

5.1 About BIOS Settings 5–2

5.1.1 Navigating BIOS Screens 5–2

5.1.2 BIOS Option ROMs 5–2

5.1.3 Description of the BIOS Screens 5–3

5.2 Changing the Configuration of a BIOS Menu Item 5–3

5.3 Setting the Boot Device Using BIOS Setup Screens 5–4

5.4 Setting Supervisor and User Passwords 5–5

5.5 Resetting the System Time and System Date 5–6

5.6 Updating the BIOS 5–6

5.7 Secondary BIOS Image 5–7

5.8 Perform a Live Firmware Upgrade 5–8

5.9 Power-On Self-Test 5–8

5.10 Changing POST Options 5–9

A. BIOS Screens A–1

Contents vii

B. Physical Characteristics B–1

B.1 Form Factor B–2

B.2 Power and Thermal Metrics B–2

B.3 Connectors and Pinouts B–2

B.3.1 Front Panel Connectors B–2

B.3.1.1 Ethernet Port B–3

B.3.1.2 USB Ports B–4

B.3.1.3 Serial Port B–5

B.3.2 AMC Connector B–5

B.3.3 Power Connector (Zone 1) B–6

B.3.4 Data Transport Connector (Zone 2) B–8

B.3.5 Advanced Rear Transition Module (ARTM) Connector (Zone 3)

B–9

B.3.5.1 Zone 3 (J30) Connector Pin Assignments B–10

B.3.5.2 Zone 3 (J31) Connector PIN Assignments B–11

B.3.5.3 Zone 3 (J32) Connector PIN Assignments B–12

B.3.5.4 Zone 3 (J33) Connector PIN Assignments B–13

B.3.5.5 Zone 3 Signal Descriptions B–14

C. ShMM CLI and Commands C–1

C.1 Shelf Manager Command-Line Interface C–2

C.2 Shelf Manager CLI Commands C–3

Index Index–1

viii Sun Netra CP3250 Blade Server User’s Guide • April 2009

Figures

FIGURE 1-1 Netra CP3250 Blade Server (Front View) 1–4

FIGURE 1-2 Netra CP3250 Blade Server (Component Side View) 1–6

FIGURE 1-3 Netra CP3250 Blade Server in Shelf Enclosure 1–7

FIGURE 1-4 Netra CP3250 Blade Server, Backplane, and Relationship to ARTM 1–9

FIGURE 1-5 Netra CP3250 Blade Server Barcode Labeling 1–14

FIGURE 2-1 Installing a Netra CP32x0 ARTM 2–9

FIGURE 2-2 Injector/Ejector Latch and Locking Screw on the ARTM 2–10

FIGURE 2-3 Engaging the Netra CP3250 Blade Server Latch 2–12

FIGURE 2-4 Serial Port on the Netra CP3250 Blade Server 2–14

FIGURE 2-5 Locating DIMM Slots 2–20

FIGURE 2-6 Installing a DIMM 2–22

FIGURE 2-7 Removing a DIMM 2–24

FIGURE 2-8 Opening the Door to Access Compact Flash 2–25

FIGURE 2-9 Compact Flash Location 2–26

FIGURE 2-10 Removing an AMC Filler Panel 2–28

FIGURE 2-11 Installing an AMC 2–29

FIGURE 2-12 Jumper 2 in the Default Run Position 2–31

FIGURE 2-13 SW1 Default DIP Switch Settings 2–33

FIGURE 2-14 SW4 Default DIP Switch Settings 2–33

FIGURE 2-15 SW5 Default DIP Switch Settings 2–34

xSun Netra CP3250 Blade Server User’s Guide • April 2009

FIGURE 2-16 Netra CP3250 Blade Server Front Panel 2–35

FIGURE A-1 BIOS Main Menu A–2

FIGURE A-2 Advanced Configuration Menu A–3

FIGURE A-3 CPU Configuration Menu A–4

FIGURE A-4 IDE Configuration Menu A–5

FIGURE A-5 USB Configuration Menu A–6

FIGURE A-6 Event Log Control Menu A–7

FIGURE A-7 IPMI 2.0 Configuration Menu A–8

FIGURE A-8 Remote Access Configuration Menu A–9

FIGURE A-9 PCI Option ROM Configuration Menu A–10

FIGURE A-10 Trusted Computing Menu A–11

FIGURE A-11 Boot Settings Menu A–12

FIGURE A-12 Boot Device Priority Configuration Menu A–13

FIGURE A-13 Security Settings Menu A–14

FIGURE A-14 Exit Menu A–15

FIGURE B-1 Ethernet RJ-45 Connector B–3

FIGURE B-2 Front Panel USB Connector B–4

FIGURE B-3 Front Panel Serial RJ-45 Connector B–5

FIGURE B-4 Power Distribution Connector (Zone 1) P10 B–6

FIGURE B-5 Zone 2 Connector B–8

FIGURE B-6 Zone 3 Connector B–10

Table des matières

Autres manuels Sun Microsystems Serveur

Sun Microsystems

Sun Microsystems Sun Enterprise 4500 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire X2270 Manuel d'installation et d'exploitation

Sun Microsystems

Sun Microsystems Sun Enterprise 10000 Manuel technique

Sun Microsystems

Sun Microsystems Fire 6800 Manuel utilisateur

Sun Microsystems

Sun Microsystems Netra T5220 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Enterprise 6500 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun GlassFish Enterprise Server 2.1 Mode d’emploi

Sun Microsystems

Sun Microsystems Technical Compute Farm Manuel

Sun Microsystems

Sun Microsystems Sun Fire V20z Manuel utilisateur

Sun Microsystems

Sun Microsystems SPARC Enterprise T1000 Mode d’emploi

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M4000 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire V20z Manuel de programmation

Sun Microsystems

Sun Microsystems Netra 440 Instructions d'installation et d'utilisation

Sun Microsystems

Sun Microsystems 15K/9960 Manuel technique

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Manuel utilisateur

Sun Microsystems

Sun Microsystems Blade X6270 M2 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M3000 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire X4200 M2 Manuel d'installation et d'exploitation

Sun Microsystems

Sun Microsystems Enterprise 4000 Manuel d'instructions d'installation

Sun Microsystems

Sun Microsystems Sun Fire V890 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Enterprise 4000 Manuel d'installation et d'exploitation

Sun Microsystems

Sun Microsystems Ultra Enterprise 450 Manuel d'installation et d'exploitation

Sun Microsystems

Sun Microsystems Sun Fire V60 Series Comment utiliser

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M8000 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur