Sun Microsystems Sun SPARC Enterprise M8000 Manuel utilisateur

This document describes how to replace an existing FAN Unit fixing bracket with a new more secure FAN Unit

fixing bracket. The new bracket restricts the FAN Unit movement to less than 3.2 mm to prevent accidental

unseating and loss of cooling.

The FAN Unit fixing bracket is located vertically between the FAN Units. The brackets have a hinge on the

bottom and a screw on the top and secure the fans in place. The retention kit includes a fixing bracket tool

(345-1443-01) to simplify the loosening of the hinge pin.

This is a hot-swap procedure that can be implemented while the system is running.

Locating the FAN Unit Fixing Bracket

Compare the part number of the bracket with the location of the bracket being replaced using the tables below.

TABLE 1 SPARC Enterprise M8000 Server

TABLE 2 SPARC Enterprise M9000 Server

Bracket Part Number Bracket location Number of Brackets

541-3413-01 System Rear 2

541-3420-01 System Front (Left) 1

541-3407-01 System Front (Right) 1

Bracket Part Number Bracket location Number of Brackets

541-3407-01 System Front 1

541-3410-01 System Rear 2

SPARC Enterprise M8000/M9000 Servers

Fan Tray Retention Kit

Replacing the FAN Unit Fixing Bracket

1. Unlock and open the server doors.

2. Use a Phillips No. 2 screwdriver to loosen the screw at the top of the fixing bracket.

Leave the screw attached until after the pin is removed to prevent the fixing bracket from falling.

3. Place the fixing bracket tool so that it is flush to the chassis and use a nylon tipped hammer or mallet to

tap the hinge pin out of the old fixing bracket (the hinge pin should remain in the hinge).

To avoid bending the fixing bracket tool, orient the tool handle horizontally so that the pin on the tool aligns

with the hinge pin.

Note – On the M8000 server, the hinge pin of the fixing bracket at the bottom right of the front of the M8000

server will hit the fan tray cage handle as it is tapped out of the bracket. When this happens, gently bend the

hinge pin downward, as it is being pushed out of the old fixing bracket. (The pin can not be removed from the

hinge until the bracket is removed.) A replacement pin is included in the kit.

4. Use a Phillips No. 2 screwdriver to remove the screw at the top of the fixing bracket and remove the

bracket.

Note – Discard the bent hinge pin. Use a new hinge pin in Step 6 below.

5. Place the new bracket in position, and align the parts of hinge.

The bracket can be held vertically or horizontally during the alignment.

6. Use a slip groove plier to carefully push the hinge pin into the hinge.

Caution – The pin bends easily. Alternately, you can use the back end of the fixing bracket tool and

the nylon hammer to tap the pin into the hinge.

7. Use a Phillips No. 2 screwdriver to secure the screw at the top of the fixing bracket.

8. Repeat Step 1 through Step 7 for each FAN Unit fixing bracket to be replaced.

Product Documentation

You can view, print, or purchase a broad selection of documentation, including localized versions, at:

http://www.oracle.com/technetwork/indexes/documentation/index.html

Technical Support

If you have technical questions about this product that are not answered in this document, go to:

https://support.oracle.com

Part No.: E22107-01

Mfg No.: 820-5635-12

March 2011

Autres manuels pour Sun SPARC Enterprise M8000

Ce manuel convient aux modèles suivants

Autres manuels Sun Microsystems Serveur

Sun Microsystems

Sun Microsystems Netra CT 820 Mode d’emploi

Sun Microsystems

Sun Microsystems Blade X6450 Manuel utilisateur

Sun Microsystems

Sun Microsystems Netra Proxy Cache 1.0 Guide de démarrage rapide

Sun Microsystems

Sun Microsystems Sun Fire E25K Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Manuel de service

Sun Microsystems

Sun Microsystems StorEdge 3000 Series Manuel utilisateur

Sun Microsystems

Sun Microsystems Ultra 30 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Ultra 450 Manuel de service

Sun Microsystems

Sun Microsystems Fire 4810 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire X2250 Manuel d'installation et d'exploitation

Sun Microsystems

Sun Microsystems SPARC T5120 Manuel de service

Sun Microsystems

Sun Microsystems Sun Enterprise 4500 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire E2900 Mode d’emploi

Sun Microsystems

Sun Microsystems Sun Enterprise 220R Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire V440 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire V480 Mode d’emploi

Sun Microsystems

Sun Microsystems Sun Fire V890 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire X4140 Guide de configuration

Sun Microsystems

Sun Microsystems Sun Fire V1280 Manuel utilisateur

Sun Microsystems

Sun Microsystems Blade X6270 M2 Manuel utilisateur

Sun Microsystems

Sun Microsystems Netra T5220 Manuel utilisateur

Sun Microsystems

Sun Microsystems Netra 440 Instructions d'installation et d'utilisation

Sun Microsystems

Sun Microsystems Sun Fire V1280 Manuel utilisateur

Sun Microsystems

Sun Microsystems Sun Fire V890 Manuel d'instructions d'installation

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur