STW TC3G Manuel utilisateur

QUICK START GUIDE FOR STARTING UP

TC3G with machines.cloud

1 Check the scope of delivery

Connect the antennas to the SMA plugs.

2 Configuring the SIM card

1. Press the yellow button

beside the card tray

2. Remove the SIM card holder

(for micro SIM cards or smaller

cards a corresponding

adapter is required)

3. Place the SIM card into the tray

4. Slide in the fitted holder carefully

TC3Gi Breakout cables

Cable

harness

adapter Power supply

TC3Ge 2G/3G/4G Wi-Fi/Bluetooth GPS/GLONASS

Optional:

3 Starting up TC3G

1. Supply the TC3G with power:

a. Set the power supply to 12 V

b. Connect the TC3G to the breakout cables

c. Connect the breakout cables to

the cable harness adapter

d. Connect the power supply unit to

the cable harness adapter

e. ATTENTION: Select the correct power

supply output connectors

f. ATTENTION: Check the polarity of the power

supply output connectors

2. Switch on the cable harness adapter

3. Wait for the status LED of the TC3G

ATTENTION: For (optimal) GPS and GSM reception, the

TC3G must be positioned outside buildings

4 Status detection by LED light

Yellow Ready for use no Internet

access; GPS not active

or no GPS reception

The TC3G lights up yellow

after switching on

Blue No Internet access;

GPS active After booting the TC3G,

it may take a few minutes

for a GPS signal to be

received or for Internet

access to be established

Pink Internet access available;

GPS not active or no

GPS reception

Green Internet access

available; GPS active

Flashing Data traffic via CAN The flashing can occur

with all colors

Red

flashing

Error signal (see

operating instructions)

A restart of the TC3G

is recommended

5 Establish a connection with

machines.insight

1. Connect your smart phone, tablet or PC to the TC3G WiFi

network: Network name: TC3G-"serial number“

Password: see label on the TC3G

2. Open address

"192.168.201.1"

in your browser

3. Click on "Login" in the left menu bar

4. Login data: Username: admin

Passwort: admin

machines.insight

6 Configuring machines.insight

1. Select "System" in the left menu bar

2. Switch to Wi-Fi within

"Network Configuration“

3. Select the "Access Point"

window on the right

4. Change the password

for Wi-Fi access

5. Click on "Save"

6. Switch to "machines.cloud"

within the "Network

Configuration"

7. Switch the Activate

connector to "ON"

8. Click on "Save"

9. Switch to GSM within

"Network Configuration"

10. Does the SIM card

already have a PIN?

Set the PIN switch

in the GSM window to "Yes" and enter the PIN

11. Set GSM status to "ON"

12. Click on "Save" and restart the TC3G (switch

off/on the cable harness adapter)

ATTENTION: With M2M SIM cards further

configurations are necessary (Point 7 )

7 Configuring a M2M SIM card (only

necessary for M2M SIM cards)

1. Login as "admin" in machines.insight

2. Navigate to "System" "Network Configuration" "GSM"

3. Select the "Custom Configuration" field on the right

4. Enter M2M parameters (source: SIM card provider)

5. Click on “Save" and restart the TC3G (switch

off/on the cable harness adapter)

8 Registration in machines.cloud and

first steps

1. Open the e-mail from

no-[email protected]

with the link to the cloud

2. Click on the link and change your

password on the web page

3. Log in with the new access data

User name: tenantname_admin

4. Top right click on "<<"

5. In the area of “Help & Support” click on “T.O.N.I.”

(Toni the Guide) and then on “Show Tours”

6. The following tours are available:

a. Register Device

b. m.a Welcome Page

c. Create / Use VPN

d. Track Evaluation

e. Data Explorer

Sensor-Technik Wiedemann GmbH (STW)

Am Bärenwald 6

87600 Kaufbeuren

Telephone: +49 8341 9505-0

Telefax: +49 8341 9505-55

[email protected]

www.stw-mm.com

Further Information

Video Tutorials:

German: youtu.be/UTl4E_I39sE

English: youtu.be/dJcDs7t28yw

All Manuals and Tutorials here:

stw-digitalization.com

Password: connectivity

T.O.N.I. Tours:

Available in machines.cloud and machines.access

Top right click on „<<“

20190123–86876-EN–Irrtümer und Änderungen vorbehalten

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels STW Unité de contrôle

STW

STW TCG Series Comment utiliser

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur